Long Form Specifications
Top is constructed of 18-gauge stainless steel, with integral front marine
edge nosing and rear backsplash. Spline bars are made of 12-gauge stain-
less steel and run front to back on both the left and right stainless steel
sides for support and spline purposes. Two pieces of 14-gauge U-channel
are welded and glued with Construction adhesive to the under side of the
top for strength and sound deadening. As a standard, 14-gauge cutting
board brackets are attached to each side and house a 1.25” thick x 9.5”
deep maple cutting board.
Dry drawer system is sized to hold 12 x 20 x 4 or 6” deep hotel pans and
smaller fractional pans. Drawer track assembly is constructed of 11-gauge
stainless steel and each set of tracks are mounted in individual galvanized
boxes. Drawer track rollers are made of Delrin 100 NC-10 and do not
require grease for operation. Intermediate tracks are removable without
tools. Drawer boxes are designed with “easy pan grip flanges”. Tracks
are designed with a stay shut feature that holds the drawer tight to the
base front on uneven floors. Exterior drawer fronts are made of 22-gauge
stainless steel; and an interior stainless liner backed with 14-gauge braces.
Handles are recessed black plastic and held in with a positive lock system.
Unit is supported with two 14-gauge leg rails that run the entire length
of the unit. Leg rails are welded to the bottom drawer boxes and are tied
together with two 12-gauge braces running front to back. Caster/leg boxes
are welded inside the leg rail and 6.12” adjustable legs are mounted as stan-
dard with (4) 5/16” bolts.
Optional Accessories and Modifications
905B Stainless steel back
906A Stainless steel end
905A Laminate back
906E Laminate end
1027A Casters
505G Laminate facing (drawer base)
108 Lock
Model F17DD54
Dry Drawer Equipment Stands
The Delfield Company, 980 S. Isabella Rd., Mt Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2003 The Delfield Company. All rights reserved. Printed in U.S.A.
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
F17DD
32" [81.3cm]
37.25"
[94.6cm]
37.25"
[94.6cm]
46" [116.8cm]
54" [137.2cm]
73" [185.4cm]
81" [205.7cm]
19" (48.3cm)
DRY DRAWE
R
32" (81.3cm
)
DRY DRAWE
R
64" [162.6cm]
37.25"
[94.6cm]
37.25"
[94.6cm]
37.25"
[94.6cm]
37.25"
[94.6cm]
27" (68.6cm)
DR
Y DRAWER
27" (68.6cm)
DRY DRAWE
R
32" (81.3cm)
DRY DRAWE
R
32" (81.3cm
)
DRY DRAWE
R
27" (68.6cm)
DRY DRAWER
27" (68.6cm)
DRY DRAWE
R
27" (68.6cm
)
DRY DRAWER
27" (68.6cm)
DRY DRAWER
27" (68.6cm)
DRY DRAWE
R
27" (68.6cm
)
DRY DRAWE
R
19" (48.3cm)
DRY DRAWE
R
ELEVATION VIEW
F17DD32
ELEVATION VIEW
F17DD54
ELEVATION VIEW
F17DD73
ELEVATION VIEW
F17DD81
96" [243.8cm]
37.25"
[94.6cm]
32" (81.3cm)
DRY DRAWER
32" (81.3cm)
DRY DRAWER
32" (81.3cm)
DRY DRAWER
ELEVATION VIEW
F17DD96
ELEVATION VIEW
F17DD64
ELEVATION VIEW
F17DD46
30.74"
[78.1cm]
9.5"
[24cm]
PLAN VIEW
ALL MODELS
The Delfield Company, 980 S. Isabella Rd., Mt Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2003 The Delfield Company. All rights reserved. Printed in U.S.A.
DS17DD 04/03
Dry Drawer Equipment Stands
NOTE: 12” x 20” x 6” deep pans are not included.
Mechanical Data–Standard Unit
MODEL NUMBER 12X20X6 PAN MODEL SHIP
NUMBER OF DRAWERS CAPACITY LENGTH WEIGHT
F17DD32
(1) 32” 2 32” (81.3cm) 290 lbs/ 131 kg
F17DD46
(1) 19” (1) 27” 3 46” (116.8cm) 350 lbs/ 159 kg
F17DD54
(2) 27” 4 54” (137.2cm) 390 lbs/ 177 kg
F17DD64
(2) 32” 4 64” (162.6cm) 430 lbs/ 195 kg
F17DD73
(1) 19 (2) 27” 5 73” (185.4cm) 475 lbs/ 215 kg
F17DD81
(3) 27” 6 81” (205.7cm) 520 lbs/ 236 kg
F17DD96
(3) 32” 6 96” (243.8cm) 600 lbs/ 272 kg
F17DD
END
VIEW
ALL
MODELS
30.74"
78.08cm
36"
91.44cm
22.41"
56.92cm
7.63"
19.38cm
6.13"
15.57cm
26.08" (66.24cm)
(19", 24", 32" drawers)
28.18 (71.57cm)
(27" drawers)
36"
91.44cm
22.41"
56.92cm
30.74"
78.08cm
7.63"
19.38cm
6.13"
15.57cm
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI