XEPA PSD3 Installation guide

Brand
XEPA
Model
PSD3
Type
Installation guide

XEPA PSD3 is a solar-powered LED security camera with a built-in DVR that offers a range of features to enhance home security. The camera features a motion sensor and night vision capabilities, allowing for 24/7 surveillance of your property. With its wireless design and easy installation process, the XEPA PSD3 provides a convenient and effective way to monitor your home, deter crime, and ensure the safety of your loved ones.

XEPA PSD3 is a solar-powered LED security camera with a built-in DVR that offers a range of features to enhance home security. The camera features a motion sensor and night vision capabilities, allowing for 24/7 surveillance of your property. With its wireless design and easy installation process, the XEPA PSD3 provides a convenient and effective way to monitor your home, deter crime, and ensure the safety of your loved ones.

Step 1: Open Packaging & Identify Parts
• PSD3 solar light with built-in camera and battery
• Solar charging panel with 15’ Cable
• DVR with adaptor and SD card
• User manual including installation sheet
• Quick Start Guide
• Screws and anchors
• Audio/Video Connecting RCA Cable
Step 2: Install Light
1. Find a location within 15’ of where the solar panel will
be installed.
2. Drill holes in the wall through the installation template
sticker, and insert plastic anchors to be flush with
mounting surface.
3. Secure the screws, leaving 3/16” of each screw
exposed for mounting the light.
4. Adjust the lamp head & motion sensor towards the
desired coverage area
5. Illuminate in TEST mode, and switch to AUTO mode
once you achieve the proper setting
Step 3: Install Solar Panel
1. Find a location within 15’ of where the light is installed.
2. Use provided install template sticker, anchors, and
screws to install the panel where it can receive direct
sunlight for at least 6-8 hours per day
3. Plug the solar panel cord into the INPUT jack at the
bottom of the light
Step 4: Connect DVR
1. Use provided RCA cable to connect DVR with TV/monitor.
2. Plug one head (3.5mm) into the DVR’s AV OUT jack.
Connect the other end of the cable to the TV, matching the
plugs and jacks by color.
3. Turn on the DVR. Turn on the TV and switch to AV.
4. Follow the DVR Operation Instruction included in the
packaging to set up.
Solar Powered LED Security Camera
Light & Wireless DVR Quick Start Guide
Product Warranty & Support Information
For customer support call 800.284.8828 (between 8:30am and 5:30pm, Monday to Friday, Pacific Time) or visit
www.xepatech.com.
This product comes with a limited warranty of 1 year from the day of purchase. (Proof of the date of purchase must be
provided if the product is returned.) If the product is found to be defective in material or workmanship, APEX will replace the
defective part(s). If any of the product parts are found to be missing, please contact APEX within ten (10) days of purchase.
XEPA TECHNOLOGIES by
APEX DIGITAL INC.
4401 Eucalyptus Avenue, Suite 100
Chino, California 91710
  • Page 1 1

XEPA PSD3 Installation guide

Brand
XEPA
Model
PSD3
Type
Installation guide

XEPA PSD3 is a solar-powered LED security camera with a built-in DVR that offers a range of features to enhance home security. The camera features a motion sensor and night vision capabilities, allowing for 24/7 surveillance of your property. With its wireless design and easy installation process, the XEPA PSD3 provides a convenient and effective way to monitor your home, deter crime, and ensure the safety of your loved ones.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents