Dorel Baby Relax Lakeley Instructions Manual

Type
Instructions Manual

This manual is also suitable for

Model No:
UPC CODE:
Lot number:
(TAKEN FROM CARTON)
_____________________________________
DPCI#:
0-65857-17022-1
0-65857-17023-8
DOREL ASIA
DA7253-1W (White)
DA7253-1E (Espresso)
Lakeley Dresser
030-08-3330
030-08-3333
Date of purchase:
_______ / _______ / _______
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: 1-800-295-1980
Fax #: 514-353-7819
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
CARE AND CLEANING
Assembly will require two people.
Estimated assembly time: 60 minutes.
To avoid unnecessary damage, when levelers have been extended, DO NOT drag across surface
when moving. Be sure to lift and carry the item to its location.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT
USE.
Check bolts/screws periodically and tighten them if necessary.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood
furniture.
MAINTENANCE
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This warranty
is valid only upon presentation of proof of purchase. This is solely limited to the repair or replacement
of defective furniture components and no assembly labor is included. This warranty does not apply to
any product which has been improperly assembled, subjected to misuse or abuse or which has been
altered or repaired in any way. This warranty gives you specific legal rights and you may also have
other rights which vary from State to State.
LIMITED WARRANTY
WARNING
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
Customer Service Department No. 413
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
12345 Albert-Hudon Boulevard, Suite 100
CAUTION: Adult assembly required.
DO NOT use power tools.
Montreal, Quebec
Canada H1G 3L1
NOTES
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to the product finish.
HARDWARE LIST
1 2 3
4 5 6
7 8 9
10 11 12
13
SAFETY STRAP
1 kit
SMALL CAM LOCK
24 PCS
LARGE CAM BOLT
21 PCS
SMALL CAM BOLT
24 PCS
Ø3 X 15mm
ROUND HEAD SCREW
14 PCS
KNOB
6 PCS
BOLT
6 PCS
FLAT HEAD SCREW
28 PCS
Ø1/4"
Ø1/4" X 1-1/4"
ADJUSTABLE LEVELER
1 PC
BOLT
1 PC
Ø4mm X 1"
Lakeley Dresser
DA7253-1E / DA7253-1W
Ø8 X 30mm
Ø6 X 20mm
LARGE CAM LOCK
21 PCS
SMALL WOOD DOWEL
24 PCS
LARGE WOOD DOWEL
20 PCS
PARTS LIST
A B C D
E F G H
I J K L
M N O P
DRAWER BACK
1 PC
LEFT MIDDLE DRAWER FRONT
BACK TOP PANEL
SUPPORT PANEL
1 PC
LEFT TOP DRAWER FRONT
6 PCS
6 PCS
Lakeley Dresser
DA7253-1E / DA7253-1W
6 PCS
6 PCS
1 PC
1 PC
DRAWER BOTTOM
BACK BOTTOM PANEL
BACK TOP RAIL
RIGHT DRAWER SIDE
FRONT BOTTOM RAIL
1 PC
LEFT DRAWER SIDE
1 PC
MIDDLE PANEL
1 PC
LEFT SIDE PANEL
1 PC
TOP PANEL
1 PC
1 PC
FRONT TOP RAIL
1 PC
1 PC
RIGHT SIDE PANEL
PARTS LIST
Q R S T
1 PC
1 PC
1 PC
1 PC
Lakeley Dresser
DA7253-1E / DA7253-1W
LEFT BOTTOM DRAWER FRONT
RIGHT TOP DRAWER FRONT
RIGHT MIDDLE DRAWER FRONT
RIGHT BOTTOM DRAWER FRONT
STEP 1
Insert large cam bolts (4) into front top rail (E), back top rail (G), front bottom rail (F) and back
bottom panel (H) as shown.
Lakeley Dresser
DA7253-1E / DA7253-1W
STEP 2
Lakeley Dresser
DA7253-1E / DA7253-1W
Insert large wood dowels (1) into middle panel (D) as shown.
D
STEP 3
Insert large cam locks (3) into middle panel (D) as shown.
Attach rails (E, F & G) and back bottom panel (H) to middle panel (D) as shown below.
Secure rails (E, F & G) and back bottom panel (H) to middle panel (D) by rotating the large cam
locks (3) on middle panel (D) 1/2 turn clockwise using a Phillips head screwdriver (not included).
Lakeley Dresser
DA7253-1E / DA7253-1W
3
3
3
STEP 4
Insert large cam locks (3) into rails (E,F,G) and back bottom panel (H) as shown.
Attach left side panel (B), right side panel (C) and support panel (J) to the assembled unit as shown.
Attach support panel (J) to bottom panel (H) using bolt (12) and large wood dowels (1) as shown.
Insert adjustable leveler (11) into support panel (J).
Insert large wood dowels (1) and large cam bolts (4) into left side panel (B) and right side panel (C).
Lakeley Dresser
DA7253-1E / DA7253-1W
Secure the side panels (B & C) to the assembled unit by rotating cam locks (3) on rail (E, F & G) and
back bottom panel (H) 1/2-turn clockwise using a Phillips head screwdriver (not included).
Secure the support panel (J) to the middle panel (D) as shown. Use a Phillips head screwdriver (not
included) to tighten the bolt.
F
D
J
1
3
11
J
12
1
1
3
3
3
3
3
3
3
1
STEP 5
Insert large cam bolts (4) into top panel (A).
Lakeley Dresser
DA7253-1E / DA7253-1W
STEP 6
Lakeley Dresser
DA7253-1E / DA7253-1W
Insert large wood dowels (1) into left side panel (B), middle panel (D) and right side panel (C) as
shown.
Insert large cam locks (3) into side panels (B & C) and middle panel (D).
Fasten top panel (A) to the assembled unit using screws (10) and by rotating large cam locks (3)
1/2-turn clockwise using a Phillips head screwdriver (not included).
3
3
G
1
1
STEP 7
Attach back top panel (I) to the assembled frame with round head screws (9).
Lakeley Dresser
DA7253-1E / DA7253-1W
Use a Phillips head screwdriver (not included) to tighten screws.
STEP 8
Insert small cam locks (5) into left drawer sides (K) and right drawer sides (L).
Insert small cam bolts (6) and small wood dowels (2) into front drawer panel (R).
Lakeley Dresser
DA7253-1E / DA7253-1W
Attach drawer sides (K & L) to front drawer panel ( R). Secure the drawer sides by rotating small
cam locks (5) 1/2-turn clockwise using a Phillips head screwdriver (not included).
Slide the drawer bottom (M) into the grooves of drawer sides (K & L) and front drawer panel ( R).
L
R
L
R
STEP 9
Use a Phillips head screwdriver (not included) to tighten the screws.
Attach knobs (7) to front drawer panels (R) with bolts (8).
Use a Phillips head screwdriver (not included) to tighten bolts.
Repeat steps 8-9 to assemble the other drawers.
Attach drawer backs (N) to drawer sides (K & L) with flat head screws (10).
Lakeley Dresser
DA7253-1E / DA7253-1W
L
N
R
R
STEP 10
Insert all drawers into the assembled unit.
Lakeley Dresser
DA7253-1E / DA7253-1W
O
P
Q
R
S
T
That's it! You've finished assembling your Lakeley Dresser!
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with
other products and/or products heavier than the
maximum weights indicated may result in instability or
cause possible injury.
Lakeley Dresser
DA7253-1E / DA7253-1W
Top panel
maximum
weight 25lbs.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: 1-800-295-1980
Fax #: 514-353-7819
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
Maximum
weight per
drawer
15lbs.
Furniture Wall Safety Strap
A B C D
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE
FURNITURE MAY TIP OVER. PLEASE INSTALL THE
SAFETY WALL STRAP BEHIND THE FURNITURE TO
ENSURE SAFETY.
MOUNTING BRACKET
4 PCS
SAFETY WALL
STRAP
2 PCS
LONG SCREW
2 PCS
SHORT SCREW
2 PCS
Step 1:
Step 2:
Attach a bracket securely to the back top rail of the furniture using the 5/8" screw provided, through the smaller
hole.
Locate the other bracket on the wall over a wall stud and 2 inches below the mounting bracket secured to the back
of your unit. Attach to the wallstud using the 2" screw provided, through the smaller hole.
Step 3:
Step 4:
Step 5:
Place the furniture into position so both mounting brackets are vertically in line.
Lace the end of the restraint strap through the larger hole in each mounting bracket. Bring both ends together and
slide the flat end through the locking end and draw it through until all slack is removed.
Confirm that the strap is securely laced and locked.
CEAB
B
MODEL #: DA7253-1E / DA7253-1W
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Email: das@dorel.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Dorel Baby Relax Lakeley Instructions Manual

Type
Instructions Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI