Honeywell 50010425-501 Ethernet Adaptor Kit allows you to connect your UDC to a compliant hub or switch with a straight-through cable or directly to a PC with a crossover cable. The kit includes an Ethernet Adaptor Assembly and 2 Tie Wraps. The Adaptor Assembly has a wire that you route to Terminal #4 on your UDC. For strain relief, you can secure your Ethernet cable to the controller with the tie wraps included in the kit using the holes in the bottom controller flange.
Honeywell 50010425-501 Ethernet Adaptor Kit allows you to connect your UDC to a compliant hub or switch with a straight-through cable or directly to a PC with a crossover cable. The kit includes an Ethernet Adaptor Assembly and 2 Tie Wraps. The Adaptor Assembly has a wire that you route to Terminal #4 on your UDC. For strain relief, you can secure your Ethernet cable to the controller with the tie wraps included in the kit using the holes in the bottom controller flange.
Honeywell 50010425-501 Ethernet Adaptor Kit allows you to connect your UDC to a compliant hub or switch with a straight-through cable or directly to a PC with a crossover cable. The kit includes an Ethernet Adaptor Assembly and 2 Tie Wraps. The Adaptor Assembly has a wire that you route to Terminal #4 on your UDC. For strain relief, you can secure your Ethernet cable to the controller with the tie wraps included in the kit using the holes in the bottom controller flange.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI