AquaPower AQE 12 User guide

Brand: AquaPower

Model: AQE 12

Type: User guide

This manual is also suitable for

AQE 8/10

1.5

1.0

High

0.75

Med

Lavatory Sink

Kitchen Sink

Flow

GPM

at 7.2 kW at 9.6 kW

AQE 12

Std.

Low

Med

Std.

High

Non-

Code

Std.

0.5

1.0

2.0

1.5

1.0 - 2.0

2.5

2.0 - 3.0

1.5

*Max. number of sinks that can be serviced by one unit

*5 *4

1 Shower

Multiple Sinks

Utility/

Janitor

Sink

Recommendations for 240 V

units are correct if installed

with 240 V service.

Increase one model size if

unit will be installed with

208 V service.

Call Aqua Power® at 800.582.2213 if you

have any sizing questions, or an

out-of-the-ordinary situation. Aqua Power®

service representatives can make recom-

mendations on sizing, or provide assistance

with our water heaters, to both homeowners

and professional installers.

Cool (Northern) Climate

Inlet water

45°F - 55°F

Cool (Northern) Climate

Inlet water

45°F - 55°F

Warm (Southern) Climate

Inlet water

55°F - 70°F



*4 *3*3 *2

AQE Sizing Guide

Single or Multiple Point Tankless Electric Water Heater

240 V

Requires 60 A

circuit breaker

240 V

Requires 50 A

circuit breaker

240 V

Requires 40 A

circuit breaker

AQE 8/10

‡

‡ AQE 8/10 is a single unit that is switchable at installation

via jumper for output at 7.2 kW (Stage 1) or 9.6 kW (Stage 2).

Model AQE 8/10

@ 7.2 kW AQE 8/10

@ 9.6 kW AQE 12

Item No. 612444 612444 612445

Phase

- 60/50 Hz 1

Voltage 240

V or 208 V 240 V or 208 V 240 V or 208 V

Wattage 7. 2 kW 5.4 kW 9.6 kW 7. 2 kW 12.0 kW 9.0 kW

Amperage draw 30 A 26 A 40 A 35 A 50 A 44 A

Required circuit breaker

size (double pole)

40 A 40 A 50 A 40 A 60 A 50 A

Required wire

size, (copper)

8 AWG 8 AWG 8 AWG 8 AWG 6 AWG 6 AWG

Minimum water ow to

activate unit

0.37 GPM

1.4 l/min

Volume of water in unit 0.13 gal / 0.5 l

Maximum inlet water

temperature

131°F / 55°C

Weight 5.9

lb / 2.7 kg

Dimensions (H x W x D) 14

” / 360 mm x 7

” / 200 mm x 4

” / 104 mm

Working pressure 150

psi / 10 BAR

Tested to pressure 300 psi / 20 BAR

Plumbing connections ½” NPT

1 Single unit, switchable between 7.2 kW and 9.6 kW at installation via jumper

2 This is our recommendation as the manufacturer. Check local codes for compliance if necessary. Tankless water heaters are

considered a non-continuous load

3 Copper must be used. Conductors should be sized to maintain a voltage drop of less than 3% under load.

AQE Series Technical Data

ISO 9001

CERTIFIED

The Aqua Power AQE series is tested and

certied by WQA against NSF/ANSI 372

for lead free compliance.

Conforms to ANSI/UL Std. 499

Certied to CAN/CSA E335-1 &

E335-2-35

AquaPower AQE 12 User guide

Brand: AquaPower

Model: AQE 12

Type: User guide

This manual is also suitable for

AQE 8/10

Download PDF

report

AquaPower AQE 12 User guide

This manual is also suitable for

AquaPower AQE 12 User guide

Related papers

Other documents