Promax RP-110 Reference guide

Type
Reference guide
RP-110
FRONT VIEW
ON / OFF
It turns ON or OFF the instrument.
1
CONFIGURATION
It access or exits the configuration menu.
2
F Connector to connect F-F adapter (F-BNC or F-IEC), for output signals that have been
activated.
3
Mini-USB connector for data transfering and to control the instrument via PC.
4
DISPLAY
It is the display with backlight.
5
DC power adapter input.
6
SELECTION
It allows you to scroll down the configuration options and move between the active fields
than define the signal parameters.
8
PDF
RP-110
Find the user’s manual on the download area at:
www.promaxelectronics.com
CURSOR
It allows you to change the configuration options and the signal parameters.
7
3
4
8
7
2
1
5
6
14-04-2015 (0 DG0177)
v1.0
QUICK REFERENCE GUIDE
USER MANUAL
DOWNLOAD
RP-110
FUNCTION GENERATOR
FUNCTION CONFIGURATION
P6: 1923.575 MHz 105 dB V
110
100
90
80
UP DOWN SAT
CW TEST GENERATOR
1
2
3
4
5
6
7
8
9
Power level of pilot signal.
Frequency of pilot signal.
Pilot signal selected.
Edit parameters blocked.
Mains power.
Battery level.
pilot signal enabled / disabled .
Pilot signals enabled / disabled (dotted line).
Band of frequencies for pilot signals.
Selected
1
2
3
4
5
6
7
8
9
CW TEST GENERATOR
LANGUAGE
BEEP
BACKLIGHT MODE
UNITS
LCD CONTRAST
LOCK PILOTS
PRESETS
ENGLISH
ON
ON
dBuV
OFF
MEM 02
It sets several parameters of the instrument.
Language:
Beep:
Backlight mode:
Units:
LCD contrast:
Lock pilots:
Presets:
Spanish / English / French / German.
on / off.
on / off / auto.
dBmV / dBμV / dBm.
- / +.
on / off.
Mem 01 - 08 (sets of pilot signals on memory).
QUICK REFERENCE GUIDE
It sets the characteristics of the signals generated by the instrument. It can or
the signal in order to check the trasmission channel.
enable
disable
  • Page 1 1
  • Page 2 2

Promax RP-110 Reference guide

Type
Reference guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI