Livex Lighting 41092-91 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
41092-91
Type
Operating instructions

This manual is also suitable for

Livex Lighting 41092-91 is a versatile lighting fixture suitable for various indoor applications. Its adjustable design allows for customization to suit your specific lighting needs. The fixture can be mounted on a ceiling or wall, providing ample illumination for rooms, hallways, or other indoor spaces. With its easy installation process, you can quickly and effortlessly enhance the ambiance of your home or office.

Livex Lighting 41092-91 is a versatile lighting fixture suitable for various indoor applications. Its adjustable design allows for customization to suit your specific lighting needs. The fixture can be mounted on a ceiling or wall, providing ample illumination for rooms, hallways, or other indoor spaces. With its easy installation process, you can quickly and effortlessly enhance the ambiance of your home or office.

ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
41092 41093
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and all
hardware from Junction Box. Carefully unpack your new fixture and lay out
all the parts on a clear area. Take care not to lose any small parts
necessary for installation.
2. Thread the two mounting screws about 1/4” into the pre-drilled holes in the
mounting plate, spaced about the same distance apart as the holes in the
fixture back plate. Attach the mounting plate to the junction box using two
junction box screws as shown. The side of the single bar marked
“GND” must face out. The junction box is not included.
3. Guide fixture wires through hole in center of mounting plate. Follow wiring
instructions carefully (see fig.2).
4.
Attach the back plate of the lamp body(A) onto the junction box, aligning the
back plate’s hole with mounting screw and lock it securely with the ball
nuts(B).
5. Install the light bulb(Not included) in accordance with the fixture’s
specifications. DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
6. Attach the shade(C) onto the lamp body(A), aligning mounting hole with
the top screw hole of lamp body, lock it securely with the knurl screw(D).
CONNECTING THE WIRES (Fig.2)
1. Connect the electrical wires as follows. Connect the Black wire from the
fixture to the black house (hot) Wire. Connect the white wire from the
fixture to the white (neutral) house wire. Make sure all wire nuts are
secured. You may wrap the connections with electrical tape. If your outlet
box has a ground wires (green or bare copper) connect fixture’s ground
wire to it. Otherwise attach the bare copper fixture wire to the green ground
screw on the mounting plate.
2. Tuck the wire connections neatly into the wall junction box.
Your installation is now complete. Return power to the junction
box and test the fixture.
41092
Mountingplate
Mounting
GroundWire
JunctionBox
(Notincluded)
41093
C
A
B
D
wire
screw
Fixture
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black(Hot)
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or Bare
Copper(Ground)
Thank you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service at: 800-761-8056
Or visit us online at: WWW.LIVEXLIGHTING.COM
©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC. DOC20171241092
FIG.2
FIG.1
  • Page 1 1

Livex Lighting 41092-91 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
41092-91
Type
Operating instructions
This manual is also suitable for

Livex Lighting 41092-91 is a versatile lighting fixture suitable for various indoor applications. Its adjustable design allows for customization to suit your specific lighting needs. The fixture can be mounted on a ceiling or wall, providing ample illumination for rooms, hallways, or other indoor spaces. With its easy installation process, you can quickly and effortlessly enhance the ambiance of your home or office.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents