Kutzall DW412X90 Installation guide

Mounting Guide:

Kutzall Sanding Discs/ Dish Wheels

Kutzall Sanding Discs and Dish Wheels feature a 7/8” I.D. and are intended to mount on a standard electric angle grinder with a

5/8” shaft. They mount on the 7/8” shoulder found on the shouldered bushing or adapter included with most angle grinders. If for

some reason your angle grinder does not have one of these bushings, you may obtain one by contacting your grinder manufacturer.

Mounting Kutzall wheels using a shouldered bushing assures that the wheel will spin as straight and round as possible. This makes

working with the tool smoother and more comfortable, while assuring that you use the entire surface of the wheel equally. The

shouldered bushing is put on the grinder first, followed by the wheel and then the nut.

Tip: Shouldered bushings may be found on the parts list for your grinder on the manufacturers’ website.

5/8

”-11

Nut

7/8” I.D Kutzall Disc

5/8” I.D. Bushing with

7/8” Shoulder

5/8

”-11

rin

This manual is also suitable for

Download PDF