Kichler Lighting 43594BK User manual

Type
User manual

Kichler Lighting 43594BK is a versatile and stylish lighting fixture that can be used in a variety of settings. With its adjustable height and multiple mounting options, it can be customized to fit your specific needs. The fixture is also easy to install, making it a great choice for do-it-yourselfers.

Here are some of the key features and benefits of the Kichler Lighting 43594BK:

  • Adjustable height: The fixture can be adjusted from 12 inches to 60 inches in height, making it suitable for use in rooms with both high and low ceilings.
  • Multiple mounting options: The fixture can be mounted on a ceiling, a wall, or a sloped ceiling. This makes it a great choice for use in a variety of rooms, including living rooms, dining rooms, bedrooms, and hallways.

Kichler Lighting 43594BK is a versatile and stylish lighting fixture that can be used in a variety of settings. With its adjustable height and multiple mounting options, it can be customized to fit your specific needs. The fixture is also easy to install, making it a great choice for do-it-yourselfers.

Here are some of the key features and benefits of the Kichler Lighting 43594BK:

  • Adjustable height: The fixture can be adjusted from 12 inches to 60 inches in height, making it suitable for use in rooms with both high and low ceilings.
  • Multiple mounting options: The fixture can be mounted on a ceiling, a wall, or a sloped ceiling. This makes it a great choice for use in a variety of rooms, including living rooms, dining rooms, bedrooms, and hallways.
IS-43594-CB
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
1) Pass xture wire from the coupling[A] on top of xture
through a stem[B] and screw stem into coupling. NOTE:
One 12” stem is required. Thread locking compound
must be applied to all stem threads as noted with symbol
(4) to prevent accidental rotaon of xture during
cleaning, relamping, etc.
2) Pass xture wire through desired amount of stems and
screw stems together using supplied short threaded
tubes[C].
3) Pass xture wire from last stem through rst loop[D].
Thread rst loop onto end of last stem.
4) Pass xture wire through second loop[D] and through
hole in canopy.
5) (If second loop is already aached to canopy, proceed
to next step). Pass threaded pipe at end of second
loop through hole in canopy. Thread lockwasher onto
threaded pipe protruding from inside canopy. Pass
xture wire through hole in hexnut and thread hexnut[E]
onto end of threaded pipe.
6) Aach chain link[F] to small loop at end of stem and to
loop on canopy.
7) Find the appropriate threaded holes on mounng
strap[G]. Assemble mounng screws[H] into threaded
holes.
8) Aach mounng strap to outlet box[I] using the strap
mounng screws[M]. The mounng strap can be
adjusted to suit posion of xture.
9) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector (not provided.) aer following the above steps.
Never connect ground wire to black or white power
supply wires.
10) Make wire connecon. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (see illus.)
Neutral Wire
11) Push xture to ceiling, carefully passing mounng screws
through holes in canopy[J]. NOTE: Be certain wires do
not get pinched between canopy and ceiling.
12) Use knobs[K] and lockwashers[L] to secure canopy.
Tighten to secure.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Fixture Diagram
Parts List
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
[A] Coupling
[B] Stem
[C] Short
Threaded
Tubes
[D] Loop
[E] Hexnut
[F] Chain Link
[G] Mounting
Strap
[H] Mounting
Screws
[I] Outlet Box
[J] Canopy
[K] Knobs
[L] Lockwashers
[M] Strap
Mounting
Screws
I
G
M
J
D
B
C
E
H
A
L
K
L
F
4 3594
IS-43594-CB
Nous sommes là pour vous aider 866-558-5706
Heures : du lundi au vendredi, de 9h à 17h (heure de l’Est)
INSTRUCTIONS:
For Assembling and Installing Fixtures in Canada
Pour Lassemblage et L’installaon Au Canada
1) Passer le l de xaon de l’accouplement[A] au dessus
du luminaire à travers une ge[B] et visser la ge
dans l’accouplement. REMARQUE: Une ge de 12 “est
nécessaire. Le composé de verrouillage de letage doit
être appliqué à tous les ls de la ge comme indiqué
avec un symbole(4) éché pour empêcher la rotaon
accidentelle du luminaire pendant le neoyage, la
relamping, etc..
2) Passer le l de xaon à travers la quanté souhaitée de
ges et la visdérive en ulisant des tubes à letage court
fournis[C].
3) Passer le l de xaon de la dernière ge à la première
boucle[D]. Enlez la première boucle sur la n de la
dernière ge.
4) Passer le l de xaon à travers la deuxième boucle[D]
et le trou traversant dans la canopée.
5) (Si la seconde boucle est déjà aachée à la canopée,
passez à l’étape suivante). Passer le tuyau leté à la n
du deuxième trou traversant dans le capot. Enler le
disposif de verrouillage sur le tuyau leté en saillie à
parr de la canopée intérieure. Passer le l de xaon
dans le trou dans lécrou hexagonal et enler l’hexagone
sur l’extrémité du tuyau leté.
6) Aachez le maillon de chaîne[F] à la pete boucle à la
n de la ge et faites une boucle sur la canopée.
7) Trouvez les trous taraudés appropriés sur sangle de
xaon[G]. Monter les vis de montage [H] dans les trous
letés.
8) Aachez la sangle de xaon à la boîte de sore[I] à
laide des vis de xaon de la courroie[M]. sangle de
xaon peut être ajustée en foncon de la posion de
montage.
9) Connecter les ls. Se reporter au tableau ci-dessous pour
faire les connexions.
Connecter le l noir ou
rouge de la boite
Connecter le l blanc de
la boîte
A Noir A Blanc
*Au cordon parallèle (rond
et lisse)
*Au cordon parallèle (à
angles droits el strié)
Au transparent, doré,
marron, ou noir sans l
disncf
Au transparent, doré,
marron, ou noir avec un l
disncf
Fil isolé (sauf l vert) avec
conducteur en cuivre
Fil isolé (sauf l vert) avec
conducteur en argent
*Remarque: Avec emploi d’un
l paralléle (SPT 1 et SPT 2). Le
l neutre est á angles droits ou
strié et lautre l doit étre rond
ou lisse (Voir le schéma).
Fil Neutre
10) Poussez xaon au plafond, en passant soigneusement
les vis de montage à travers des trous dans la
canopée[J].
REMARQUE : Vous assurer que tous les ls sont dans
le couvercle et ne se retrouvent pas pincés entre le
couvercle et le plafond.
11) Ulisez les boutons[K] et les systèmes de verrouillage[L]
pour sécuriser le voile. Serrez pour sécuriser.
Diagramme d’appareils
ATTENTION – RISQUE DE DÉCHARGES ÉLECTRIQUES -
Couper le courant au niveau du panneau du disjoncteur du
circuit principal ou de la boîte à fusibles principale avant de
procéder à l’installaon.
ATTENTION:
Ce luminaire doit être installé conformément aux codes
d’électricité naonaux (NEC) et sasfaire toutes les
spécicaons des codes locaux. Si vous ne connaissez pas
les exigences de ces codes, il est recommandé de coner
l’installaon à un électricien ceré.
Liste des Pièces
Précauons
[A] Laccouple-
ment
[B] Tige
[C] Filetage Court
Fournis
[D] Première
Boucle
[E] Deuxième
Boucle
[F] Maillon de
Chaîne
[G] Sangle de
Fixation
[H] Vis de
Montage
[I] Boîte de
Sortie
[J] Canopée
[K] Boutons
[L] Systèmes de
Verrouillage
[M] Vis de xaon
de la courroie
Instrucons d’installaon
I
G
M
J
D
B
C
E
H
A
L
K
L
F
4 3594
  • Page 1 1
  • Page 2 2

Kichler Lighting 43594BK User manual

Type
User manual

Kichler Lighting 43594BK is a versatile and stylish lighting fixture that can be used in a variety of settings. With its adjustable height and multiple mounting options, it can be customized to fit your specific needs. The fixture is also easy to install, making it a great choice for do-it-yourselfers.

Here are some of the key features and benefits of the Kichler Lighting 43594BK:

  • Adjustable height: The fixture can be adjusted from 12 inches to 60 inches in height, making it suitable for use in rooms with both high and low ceilings.
  • Multiple mounting options: The fixture can be mounted on a ceiling, a wall, or a sloped ceiling. This makes it a great choice for use in a variety of rooms, including living rooms, dining rooms, bedrooms, and hallways.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages