Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Shaye™
Single Handle Pullout Kitchen Faucet
Models: 87454 series
NOTE: DESIGNED TO INSTALL
THROUGH 1, 2, 3 OR 4 HOLES 1-1/2" (38mm) DIA.
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Power Clean™ spray technology
• Pullout spray with 59" braided hose
• Flexible supplies with 3/8" compression fittings
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Spout rotation is 120˚
• Operates with less than 5lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
2-25/64"
(61mm)
10-13/32"
(264mm)
2-15/16"
(74mm)
2-7/16"
(62mm)
?"
(?mm)
?"
(?mm)
1-9/10"
(48mm)
9 7/8"
(251mm)
28-1/2"
(724mm)
2-5/32" (55mm)
MAX. DECK THICKNESS
With Escutcheon (3 hole installation)
Without Escutcheon (1 hole installation)
2-19/32" (66mm)
?"
(?mm)
?"
(?mm)
?"
(?mm)
7/18
CRITICAL DIMENSIONS
(DO NOT SCALE)
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI