Moen S73004ORB, S73004BG Specification

  • Hello! I am an AI chatbot trained to assist you with the Moen S73004ORB Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Specifications
DESCRIPTION
Reex™ pulldown system oers smoother operation, easy movement and secure docking
PowerBoost™ Technology provides boosted water performance with the push of a button
Duralock™ quick connect installation
Metal Wand
Metal construction with various nishes identied by sux
Pulldown spray with 68" braided hose
High arc spout provides the perfect height and reach for prep sinks while the pulldown
feature provides innite maneuverability for food preparation tasks
360 rotating spout
Flexible supply lines with 3/8" compression ttings
OPERATION
Lever style handle
Four-Function Spray Wand
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pulldown or retracted position
Temperature controlled by 100 arc of handle travel
FLOW
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
1255™ Duralast™ cartridge for Single-Handle Faucets
Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
Third party certied to IAPMO Green, ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF 61/9 & 372
Meets CalGreen and Georgia SB370 requirements
Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• ADA
for lever handle
The backow protection system in this device consists of two independently operating
check valves, a primary and a secondary which prevent backow
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects to the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Weymouth™
Single-Handle High Arc
Pulldown Kitchen Faucet
Models: S73004 series
NOTE: THIS FAUCET IS DESIGNED
TO BE INSTALLED THROUGH 1
HOLE, 1-1/2" (38mm) MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
1/19
9-3/16"
(223.24cm)
4-5/16"
(109.59cm)
8-31/32"
(227.9cm)
16-47/64"
(425.05cm)
2-1/2"
(63.5cm)
5-3/4"
(146.cm)
4-7/8"
(123.77cm)
2-3/8"(60.45cm)
7-61/64"
(202.1cm)
3-15/32"
(88.12cm)
57/64"
(22.75cm)
17.0
°
/