DANCO 80765X is a tub spout designed for easy D.I.Y. solutions. It is compliant with ASME A112.18.1-2005/CSA B125.1-05 standards, ensuring safety and preventing unintended release of water. The device is suitable for both 1/2" and 3/4" threaded connections. The installation process involves wrapping thread tape onto the threaded end of the stub out nipple and then screwing the tub spout onto the nipple. It is important to hand tighten the tub spout and test for leaks before using it. Failure to do so may result in wall damage.
DANCO 80765X is a tub spout designed for easy D.I.Y. solutions. It is compliant with ASME A112.18.1-2005/CSA B125.1-05 standards, ensuring safety and preventing unintended release of water. The device is suitable for both 1/2" and 3/4" threaded connections. The installation process involves wrapping thread tape onto the threaded end of the stub out nipple and then screwing the tub spout onto the nipple. It is important to hand tighten the tub spout and test for leaks before using it. Failure to do so may result in wall damage.
DANCO 80765X is a tub spout designed for easy D.I.Y. solutions. It is compliant with ASME A112.18.1-2005/CSA B125.1-05 standards, ensuring safety and preventing unintended release of water. The device is suitable for both 1/2" and 3/4" threaded connections. The installation process involves wrapping thread tape onto the threaded end of the stub out nipple and then screwing the tub spout onto the nipple. It is important to hand tighten the tub spout and test for leaks before using it. Failure to do so may result in wall damage.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI