Filament Design CLI-JB-029949 Installation guide

Z12-51SF

APX WT. 5.50 LBS

Read directions and follow steps 1-7

decorative knobs (supplied)

8) Attach with the shade cap and tighten

the

finial securing the shade.

9) Install (2) 60W bulbs into the bulb socket.

Z12-51SF

WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK,

BE SURE TO SHUT OFF POWER WHILE INSTALLING OR

SERVICING THIS FIXTURE.

6) Put the metal tube(B)onto the shade(A),then screw the

threaded rod(C),secure the cap over the metal

tube(B),place the canopy(E) onto the cap(D),and tighten

securely with wing nut(F) .

7) Install bulbs into the bulb sockets .

Uses (3) maximum 100Watt Type A Bulbs.

Or(3) maximum 23Watt CFL Bulb

(Bulbs not included)

LAYOUT ALL COMPONENTS AND REVIEW PARTS BEFORE ASSEMBLY

Revision 0 –22/ 11//13 Made in China ./ Hecho en China