Marantec KLIGHT8 Owner's manual

Type
Owner's manual

Marantec KLIGHT8 is a kit of LED lights for a barrier boom. It can be used for various purposes, such as illuminating the boom for increased visibility, deterring crime, or providing additional safety features. The kit includes everything needed for installation, including the LED strips, mounting hardware, and instructions. The LED strips are durable and long-lasting, and they emit a bright, consistent light that will help to illuminate the boom even in low-light conditions. The kit is easy to install and can be customized to fit any size boom.

Marantec KLIGHT8 is a kit of LED lights for a barrier boom. It can be used for various purposes, such as illuminating the boom for increased visibility, deterring crime, or providing additional safety features. The kit includes everything needed for installation, including the LED strips, mounting hardware, and instructions. The LED strips are durable and long-lasting, and they emit a bright, consistent light that will help to illuminate the boom even in low-light conditions. The kit is easy to install and can be customized to fit any size boom.

Istruzioni ed avvertenze per l’installazione e l’uso
Instructions and warnings for installation and use
Instrucciones y advertencias para su instalación y uso
Anleitungen und Hinweise zu Installation und Einsatz
Instruções e advertências para a instalação e utilização
Instructions et avertissements pour l’installation et l’usage
Management
System
ISO 9001:2008
www.tuv.com
ID 9105043769
Kit luci a led per asta
Kit led lights for bar
Kit LED pour lisse
Kit luces de LED para mástil
Kit LED für Balken
Kit de luzes led para bar
Zestaw lamp LED dla ramienia
KLIGHT
Fig. 1 - ALT424K
Fig. 3
Fig. 5 - UPPER LED
Fig. 2 - ALT624K
Fig. 4 - ALT624K
Fig. 6 - UPPER LED
RECOMMENDED
INSERT STRIP INTO
PROFILE CHANNEL
15
Ø 11,5
4545
≈ 5/10 mm
≈ 15 mm
A
B
ATTENTION: THE HOLE MUST BE
DRILLED IN HOUSING SIDE
Fig. 7 - LOWER LED
Fig. 9
Fig. 11
Fig. 8 - LOWER LED
Fig. 10
Fig. 12 - ALT424K
IF APFX OR APM TO
BE INSTALLED MOVE
STRIP.
IF NOT INSTALLED SEE FIG.5
≈ 80/85 mm
IF APFX OR APM TO
BE INSTALLED MOVE
STRIP.
IF NOT INSTALLED SEE FIG.6
≈ 90 mm
Ø 6
20
=
=
=
=
N.B ROTATE BOOM 180°
IF UPPER AND LOWER
STRIP DRILL ON BOTH
SIDES
INSERTING RUBBER
PROFILE PROF 4/6/8
INSERTING BOOM SUPPORT FOR CUTTING DISTANCE CALCULATION
INSERTING CABLES IN
HOLE/S / OF FIG.9
2 / 5 mm
Fig. 13 - ALT624K
Fig. 15
Fig. 17 - ALT624K
Fig. 14
Fig. 16 - ALT424K
Fig. 18
20
20
20
20
60 / 65
INSERTING RUBBER PROFILE PROF 4/6/8
INSERTING BOOM SUPPORT FOR CUTTING DISTANCE CALCULATION
INSERTING BOOM SUPPORT FOR CUTTING DISTANCE CALCULATION
IF INSTALLING APFX OR
APM MOVE BACK 60/65
2 / 5 mm
2 / 5 mm
20
INSERTING BOOM SUPPORT FOR CUTTING DISTANCE CALCULATION
2 / 5 mm
Fig. 19
Fig. 21
Fig. 23
Fig. 20
Fig. 22
Fig. 24 - ALT424K
IF INSTALLING APFX OR APM MOVE STRIP.
IF NOT INSTALLING SEE FIG. 20
INSERT LED STRIP HEAD INTO
PROFILE STOPPER. FIT BETWEEN
RIB AND STUD
2 / 5 mm
2 / 5 mm
80 / 85 mm
INSERT LED STRIP HEAD INTO
PROFILE STOPPER.
FIT BETWEEN RIB AND STUD
STRIP CABLE ON BOTH ENDS AND INSERT.
Fig. 25 - ALT624K
Fig. 27 - ALT424K
Fig. 29 - ALT424K
Fig. 26 - ALT624K
Fig. 28 - ALT624K
Fig. 30 - ALT624K
400 mm
150 mm
s
DE - Led streifen-länge
PT - Fita de led comprida
PL - Długość paska LED
Fig. 33 IT - Lunghezza strip led
EN - Led strip length
FR - Longueur bande led
ES - Largo tira led
Fig. 31 - ALT424K Fig. 32 - ALT624K
AA
BB
n min total length
KLIGHT4 5 3220mm
KLIGHT6 10 5520mm
KLIGHT8 12 7360mm
1)
2)
3)
4)
Key Automation S.r.l.
Via Meucci 23 - 30027 San Donà di Piave (VE)
T. +39 0421.307.456 - F. +39 0421.656.98
[email protected] - www.keyautomation.it
Instruction version
580KLIGHT REV.03
DICHIARAZIONE DI INCORPORAZIONE DI QUASI-MACCHINA
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
Key Automation S.r.l.
Via Meucci 23 Capitale sociale 154.000,00 i.v
.
30027 San Dona’ di Piave (VE) Reg. Imprese di Venezia 03627650264
P.IVA 03627650264 C.F. 03627650264 REA VE 326953
[email protected] www.keyautomation.it
Il sottoscritto Nicola Michelin, Amministratore Delegato dell’azienda
The undersigned Nicola Michelin, General Manager of the company
Key Automation srl, Via Meucci 23 - 30027 San Dona’ di Piave (VE) ITALIA
dichiara che il prodotto tipo:
declares that the product type:
KLIGHT
Kit Luci LED per aste barriera
LED lights kit for barrier boom
Modello:
Model:
900KLIGHT4, 900KLIGHT6, 900KLIGHT8
E’ conforme a quanto previsto dalle seguenti direttive comunitarie:
Is in conformity with the following community (EC) regulations:
Direttiva macchine / Machinery Directive 2006/42/EC
Direttiva compatibilità elettromagnetica / EMC Directive 2014/30/EU
Direttiva RoHS / RoHS Directive 2011/65/EU
Secondo quanto previsto dalle seguenti norme armonizzate:
In accordance with the following harmonized standards regulations:
EN 62471:2008
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001+ A2:2008
EN 61000-3-2:2006 + A1 + A2:2009
EN 61000-3-3:2008
EN 62233:2008
Dichiara che la documentazione tecnica pertinente al prodotto è stata redatta conformemente a quanto previsto dalla direttiva
2006/42/CE Allegato VII parte B e verrà fornita a fronte di una richiesta adeguatamente motivata dalle autorità nazionali.
Declares that the technical documentation is compiled in accordance with the directive 2006/42/EC Annex VII part B and will be
transmitted in response to a reasoned request by the national authorities.
Dichiara altresì che non è consentita la messa in servizio del prodotto finchè la macchina, in cui il prodotto è incorporato, non
sia stata dichiarata conforme alla direttiva 2006/42/CE.
He also declares that is not allowed to use the above mentioned product until the machine, in which this product is incorporated,
has been identified and declared in conformity with the regulation 2006/42/EC.
San Donà di Piave (VE), 05/09/18
Amministratore Delegato
General Manager
Nicola Michelin
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Marantec KLIGHT8 Owner's manual

Type
Owner's manual

Marantec KLIGHT8 is a kit of LED lights for a barrier boom. It can be used for various purposes, such as illuminating the boom for increased visibility, deterring crime, or providing additional safety features. The kit includes everything needed for installation, including the LED strips, mounting hardware, and instructions. The LED strips are durable and long-lasting, and they emit a bright, consistent light that will help to illuminate the boom even in low-light conditions. The kit is easy to install and can be customized to fit any size boom.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages