MASSEY FERGUSON 1693494 User manual

How to use this file...(Operators Manuals)

————————————————————————————————————————————–––

Instructions for

Print Vendors (Paper Manuals)

Paper Size: * 11 x 17

* Body—50 lbs brilliant white offset or equivalent.

* Cover—on pre-printed two-tone “Swash” stock.

Press: * Body—1-color, 2-sided

* Cover imprint —1-color, 1-sided

Bindery:* Saddle Stitch, Face Trim

* Face Trim

COVERS: * This file contains several manuals, which differ only in their covers.

* Covers are all present at the beginning of this file.

* Back cover for a particular manual is the page IMMEDIATELY AFTER the front cover.

• Check the front cover for the individual part number (typically a 171xxxx number).

BODY: • The body of the manual is identical, regardless of the cover used.

* REMEMBER: ODD number pages are ALWAYS right hand pages, and EVEN number are ALWAYS

left hand pages.

General: * This instruction page is NOT part of the manual and must NOT be printed.

• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,

and should NOT be printed.

————————————————————————————————————————————–––

If you have further questions on how to utilize this file, please contact

Simplicity Technical Publications Department at (262) 284-8647.

THIS PAGE INTENTIONALLY BLANK

Operator’s manual

Baron

1693494 Baron tractor (Export)

1693575 102 cm (40") deck (Export)

1693583 Baron tractor

1693585 102 cm (40") deck

1720648-06

Rev. 6/2001

TP 100-2284-06-BR-S

EN

MANUFACTURING, INC.

500 N Spring Street / PO Box 997

Port Washington, WI 53074-0997 USA

www.simplicitymfg.com

Operator’s manual

2418 Series

1693687 2418 tractor (Export)

1693685 102 cm (40") deck (Export)

1720648-06

Rev. 6/2001

TP 100-2284-06-BR-S

EN

Massey Ferguson Lawn & Garden Equipment

is Manufactured and Distributed by Simplicity Manufacturing, Inc.

500 N. Spring Street • P.O. Box 997

•

Port Washington, WI 53074-0997 USA

www.masseylawn.com

Troubleshooting...................................................................................................................F

Specifications and Identification numbers........................................................................ii-v

Safety rules and information...............................................................................................A

Features and controls.........................................................................................................B

Operating the tractor ..........................................................................................................C

Regular maintenance .........................................................................................................D

Adjustments and service ....................................................................................................E

i

123...

TP 100-2284-06-BR-S

169XXXX

MFG

Simplicity Manufacturing, Inc.

Port Washington, WI 53074-0997 U.S.A.

SERIAL

XXXXX

SSAAMMPPLLEE

A

B

C

123...

ii

Identification numbers

Record the identification numbers for your model in

the space provided. The identification tags (A) are located

on the tractor (B) and the mower deck (C). For the location

of the engine identification numbers, refer to the engine

manual.

When contacting your authorized dealer for replacement

parts, service or information, you MUST have these

numbers.

Be sure to fill out and return the warranty registration card

supplied with your unit.

Identification numbers

Tractor manufacturing number Tractor serial number

169 __ __ __ __

Mower deck manufacturing number Mower deck serial number

169 __ __ __ __

Dealer name Date purchased

Engine make and model Engine serial number

2000

XXX

kg

XXX

Serial No.:

169XXXX

XXX

XXXXX

Mfg. No.:

kW:

XXXX RPMEngine RPM:

Simplicity Mfg. Inc.

500 N. Spring St.

Port Washington, WI USA 53074-0997

SSAAMMPPLLEE

Identification numbers

North American Models

CE Models

123...

iii

2000

XXX

kg

XXX

Serial No.:

169XXXX

XXX

XXXXX

Mfg. No.:

kW:

XXXX RPMEngine RPM:

Simplicity Mfg. Inc.

500 N. Spring St.

Port Washington, WI USA 53074-0997

Manufacturer’s

Identification

Number

Manufacturer’s

Address

Manufacturer’s

Serial Number

Maximum Engine

Speed in

Rotations per

Minute

Power Rating in

Kilowatts

Sound Power

in Decibels

Mass of Unit

in Kilograms

CE Compliance Logo

Year of

Manufacture

CE Identification tag markings

CE Identification tag

Note: See I.D. tag on unit frame for serial number.

Export Models:

Place copy of Identification

Tag here.

iv

123...

Transmission

Make Tuff Torq

Model K-51

Max. forward speed 8,8 kph (5,5 mph)

Max. reverse speed 5,5 kph (3,4 mph)

Transmission oil SAE 10W30, API SG, Motor

Oil capacity 1,7 l (2,5 qt)

Wheels

Tire size

Front 15 x 6,0-6

Rear 18 x 8,5-8

Tire pressure

Front .83-1.04 bar (12-15 psi)

Rear .41-.55 bar (6-8 psi)

107cm (42")

92cm (36")

188cm (74")

246cm (97")

130cm (51")

109cm

(43")

Specifications

Weight

Tractor 218 kg (480 lb)

Grass catcher 18 kg (40 lb)

Mower deck 50 kg (110 lb)

Crate (approx) 57 kg (125 lb)

Capacities

Grass catcher 310 liters

Fuel tank 9,3 l (3,5 gal)

Engine

Make Briggs & Stratton

Model InTek™ V-Twin

Horsepower 18 HP

123...

v

1693494

1693583

Vibration Data *

Model

At the Steering Wheel (in m/s )

2

At the Seat (in m/s )

2

Drawbar Force Limits

Horizontal Force Limit (in Newton)

Vertical Force Limit (in Newton)

Standards & Directive Compliance

European Machinery Directive 98/37/EC

European EMC Directive 89/336/EEC

Specifications are correct at the time of printing and subject to change without notice.

Items marked "N/A" are not available at the time of printing.

GS Mark Certified by TUV Rheinland

ANSI B71.1-1998

Sound Pressure Data **

LpA (in dB(A))

4.8

.3

4.8

.3

86

Sound Power Data ***

LwA (in dB(A)) 100

100

444

222

444

222

X

Test performed on a concrete floor.

Sound pressure at operator's position.

Tested according to European Normative Vibration Standards EN 1032 & EN 1033.*

Tested according to European Noise Directive 79/113/EEC.**

Tested according to EN 84/538/EEC.***

European Harmonized Lawn Mower

Standard EN 836

CE Compliance Specifications

vi

123...

Common replacement parts

Listed below are the more common replacement parts. Only

genuine factory replacement parts will assure optimum

performance and safety. Do not attempt repairs or maintenance

unless proper procedures and safety precautions are followed.

For assistance in any area, see your dealer.

Replacement Parts

QTY. DESCRIPTION PART NO.

1 Tractor Drive Belt 1720036

1 Key, Ignition 1717163

1 Interlock Switch, Brake 1719681

1 Interlock Switch, Seat 1714770

1 Battery 1685215

1 Solenoid 1685290

1 Switch, PTO (Electric Clutch) 1716332

1 Headlamp Bulb 1677371

1 Collector Bag 1719678

• Mower Blades

1 - 40" Mower, R.H. 1719737

1 - 40" Mower, L.H. 1719736

• Mower Belts

1 - PTO V-Belt 1721533

1 - Arbor Drive Belt 1719601

Maintenance Items

DESCRIPTION PART NO.

• Simplicity Engine Oils

Case of 12 qts. (Your dealer has 1 qt. cans)

-SAE 5W-30 SF/CD (Cold Weather 30° & under)

1685576

-SAE 30 SG/CC (Warm weather 32° & up)

1685659

• Touch-Up Paint

Deep Orange, 13 oz. spray can 1685611

Deep Orange, 1 quart can 1685612

Deep Orange, 1/2 oz. bottle w/brush cap 1685615

Solar Black, 13 oz. spray can 1686779

Solar Black, 1 quart can 1686781

Red, 13 oz. spray can 1685722

•Touch-Up Daubers

Deep Orange 1/2 oz. w/Brush Cap 1685615

•Grease Gun Kit w/8 oz. Grease Tube 1685510

Replacement 8 oz. Grease Tube for above 103077

•Tire Sealant-Stops Tire Leaks. Prevents Flats.

11 oz. Tube 1685523

•Gas Can-No Tip Design. Durable Polyethylene.

1 gallon1685587

2-1/2 gallon 1685555

5-1/4 gallon 1685556

•Cleaner, Polish, Sealant & Protectant

8 oz. Bottle 1685696

•Degrimer/Degreaser

32 oz. Bottle w/Trigger Spray 1685619

1 gallon 1685621

A-1

Safety rules

and information

A-2

Safety Rules & Information

GENERAL OPERATION

• Read, understand, and follow all instructions in the manual and on

the unit before starting.

• Only allow responsible adults, who are familiar with the

instructions, to operate the unit (local regulations can restrict

operator age).

• Clear the area of objects such as rocks, toys, wire, etc., which

could be picked up and thrown by the blade(s).

• Be sure the area is clear of other people before mowing. Stop unit

if anyone enters the area.

• Never carry passengers.

• Do not mow in reverse unless absolutely necessary. Always look

down and behind before and while travelling in reverse.

• Be aware of the mower discharge direction and do not point it at

anyone. Do not operate the mower without either the entire grass

catcher or the deflector in place.

• Slow down before turning.

• Never leave a running unit unattended. Always disengage the

PTO, set parking brake, stop engine, and remove keys before

dismounting.

• Turn off the PTO switch to disengage the blades when not

mowing.

• Stop engine before removing grass catcher or unclogging chute.

• Mow only in daylight or good artificial light.

• Do not operate the unit while under the influence of alcohol or

drugs.

• Watch for traffic when operating near or crossing roadways.

• Use extra care when loading or unloading the unit into a trailer or

truck.

• Data indicates that operators, age 60 years and above, are

involved in a large percentage of riding mower-related injuries.

These operators should evaluate their ability to operate the riding

mower safely enough to protect themselves and others from injury.

• Keep in mind the operator is responsible for accidents occurring to

other people or property.

• All drivers should seek and obtain professional and practical

instruction.

• Always wear substantial footwear and trousers. Never operate

when barefoot or wearing sandals.

• Before using, always visually check that the blades and blade

hardware are present, in-tact, and secure. Replace worn or

damaged parts.

• Never operate the machine with defective guards, or without safety

protective devises in place.

• Disengage attachments before: refuelling, removing an

attachment, making adjustments (unless the adjustment can be

made from the operator’s position).

• When the machine is parked, stored, or left unattended, lower the

cutting means unless a positive mechanical lock is used.

• Follow the manufacturer’s recommendation for wheel weights or

counterweights.

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip-over accidents,

which can result in severe injury or death. All slopes require extra caution.

If you cannot back up the slope or if you feel uneasy on it, do not operate

on it.

Control of a ride-on machine sliding on a slope will not be regained by

the application of the brake. The main reasons for loss of control are:

insufficient tire grip on the ground, speed too fast, inadequate braking, the

type of machine is unsuitable for it’s task, lack of awareness of the ground

conditions, incorrect hitching and load distribution.

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control

of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

This mowing deck is capable of amputating hands and feet and throwing objects.

The triangle in text signifies important cautions or warnings which must be followed.

WARNING

Never operate on slopes greater than 17.6 percent

(10°) which is a rise of 3-1/2 feet (106 cm) vertically

in 20 feet (607 cm) horizontally.

When operating on slopes use additional wheel

weights or counterweights. See your dealer to

determine which weights are available and

appropriate for your unit.

Select slow ground speed before driving onto slope.

In addition to front and rear weights, use extra

caution when operating on slopes with rear-mounted

grass catcher.

Mow UP and DOWN the slope, never across the

face, use caution when changing directions and DO

NOT START OR STOP ON SLOPE.

TP 600-2459-00-XX-SMA

Do

• See your authorized dealer for recommendations of wheel weights

or counterweights to improve stability.

• Mow up and down slopes, not across.

• Remove obstacles such as rocks, tree limbs, etc.

• Watch for holes, ruts, or bumps. Uneven terrain could overturn the

unit. Tall grass can hide obstacles.

• Use slow speed. Tires may lose traction on slopes even through

the brakes are functioning properly. Choose a low gear so that you

will not have to stop or shift while on the slope.

• Use extra care with grass catchers or other attachments. These

can change the stability of the unit.

• Keep all movement on the slopes slow and gradual. Do not make

sudden changes in speed or direction.

• Always keep unit in gear especially when traveling downhill. When

clutching, release clutch slowly.

Do Not

• Do not start or stop on a slope. If tires lose traction, disengage the

blade(s) and proceed slowly straight down the slope.

• Do not turn on slopes unless necessary, and then, turn slowly and

gradually downhill, if possible.

• Do not mow near drop-offs, ditches, or embankments. The mower

could suddenly turn over if a wheel is over the edge of a cliff or

ditch, or if an edge caves in.

• Do not mow on wet grass. Reduced traction could cause sliding.

• Do not try to stabilize the unit by putting your foot on the ground.

• Do not use grass catchers on steep slopes.

• Do not mow slopes you cannot back up.

• Do not shift to neutral and coast down hill.

A-3

Slope Operation Continued

Children

Tragic accidents can occur if the operator is not alert to the presence of

children. Children are often attracted to the unit and the mowing activity.

Never assume that children will remain where you last saw them.

• Keep children out of the mowing area and under the watchful care

of another responsible adult.

• Be alert and turn unit off if children enter the area.

• Before and during reverse operation, look behind and down for

small children.

• Never carry children. They may fall off and be seriously injured or

interfere with safe unit operation.

• Never allow children to operate the unit.

• Use extra care when approaching blind corners, shrubs, trees, or

other objects that may obscure vision.

TOWING

• Never allow children or others in or on towed equipment.

• Tow only with a machine that has a hitch designed for towing. Do

not attach towed equipment except at the hitch point.

• Follow the manufacturer’s recommendations for weight limit for

towed equipment and towing on slopes.

• On slopes, the weight of the towed equipment may cause loss of

traction and loss of control.

• Travel slowly and allow extra distance to stop.

• Do not shift to neutral and coast down hill.

TRANSPORTING AND STORAGE

• Always observe safe refueling and fuel handling practices when

refueling the tractor after transportation or storage.

• Always follow the engine manual instructions for storage

preparations before storing the tractor for both short and long term

periods.

• Always follow the engine manual instructions for proper start-up

procedures when returning the unit to service.

• Never store the unit or fuel container inside where there is an

open flame or pilot light, such as in a water heater. Allow unit to

cool before storing.

EMISSIONS

• Engine exhaust from this product contains chemicals known, in

certain quantities, to cause cancer, birth defects, or other

reproductive harm.

• Look for the relevant Emissions Durability Period and Air Index

information on the engine emissions label.

WARNING

When transporting this tractor on an open trailer,

make sure unit is facing forward, toward the direction

of travel. If tractor is facing backward, wind lift could

cause damage to the hood.

SERVICE AND MAINTENANCE

• Use extra care in handling gasoline and other fuels. They are

flammable and vapors are explosive.

a) Use only an approved container.

b) Never remove gas cap or add fuel with the

engine running. Allow engine to cool before refueling. Do not

smoke.

c) Never refuel the unit indoors.

• If fuel is spilled, do not attempt to start the engine but move the

machine away from the area of spillage and avoid creating any

source of ignition until petrol vapors have dissipated.

• Replace all fuel tank caps and fuel container caps securely.

• Never fill containers inside a vehicle or on a truck bed with a

plastic bed liner. Always place containers on the ground away

from your vehicle before filling.

• Remove gas-powered equipment from the truck or trailer and

refuel it on the ground. If this is not possible, then refuel such

equipment on a trailer with a portable container, rather than from a

gasoline dispenser nozzle.

• Keep nozzle in contact with the rim of the fuel tank or container

opening at all times until fueling is complete. Do not use a nozzle

lock-open device.

• If fuel is spilled on clothing, change clothing immediately.

• Maintain or replace safety and instruction labels as necessary.

• Never run a unit in an enclosed area.

• Keep nuts and bolts, especially blade attachment bolts, tight and

keep equipment in good condition.

• Never tamper with safety devices. Check their proper operation

regularly and make necessary repairs if they are not functioning

properly.

• Keep unit free of grass, leaves, or other debris build-up. Clean up

oil or fuel spillage.

• Stop and inspect the equipment if you strike an object. Repair, if

necessary, before restarting.

• Never make adjustments or repairs with the engine running unless

specified otherwise in the engine manufacturer’s manual.

• Grass catcher components are subject to wear, damage, and

deterioration, which could expose moving parts or allow objects to

be thrown. Frequently check components and replace with

manufacturer’s recommended parts, when necessary.

• Mower blades are sharp and can cut. Wrap the blade(s) or wear

gloves, and use extra caution when servicing them.

• Check brake operation frequently. Adjust and service as required.

• Use only factory authorized replacement parts when making

repairs.

• Always comply with factory specifications on all settings and

adjustments.

• Only authorized service locations should be utilized for major

service and repair requirements.

• Never attempt to make major repairs on this unit unless you have

been properly trained. Improper service procedures can result in

hazardous operation, equipment damage and voiding of

manufacturer’s warranty.

• On multiple blade mowers, take care as rotating one blade can

cause other blades to rotate.

• Do not change engine governor settings or over-speed the engine.

Operating the engine at excessive speed can increase the hazard

of personal injury.

• Disengage drive attachments, stop the engine, remove the key,

and disconnect the spark plug wire(s) before: clearing attachment

blockages and chutes, performing service work, striking an object,

or if the unit vibrates abnormally. After striking an object, inspect

the machine for damage and make repairs before restarting and

operating the equipment.

• Never place hands near the hydro pump cooling fan when the

tractor is running. Cooling fan is located on top of the transaxle

A-4

Safety interlock

system tests

This unit is equipped with safety interlock switches

and other safety devices. These safety systems are

present for your safety: do not attempt to bypass the

safety switches and never tamper with the safety

devices. Check their operation regularly.

Service interval: Every fall and spring

Operational safety checks

Your unit is equipped with a seat switch safety

system. Check the seat switch operation every fall

and spring with the following tests:

Test 1 - Engine should NOT crank if:

• PTO switch (A) is in the on position, or

• Brake pedal (C) is NOT fully depressed [parking

brake (B) disengaged].

Test 2 - Engine SHOULD crank if:

• PTO switch (A) is in the off position, and

• Brake pedal (C) is fully depressed [parking brake

(B) engaged].

Test 3 - Engine should SHUT OFF if:

• Operator rises off seat (E) with PTO (A) engaged,

or

• Operator rises off seat (E) with brake pedal (C)

NOT fully depressed [parking brake (B)

disengaged].

Test 4 - PTO should SHUT OFF if:

• The grass catcher (F) is opened with the PTO

switch (A) in the on position.

Test 5 - Mower blade brake check

The mower blades and mower drive belt should

come to a complete stop within five seconds after

PTO switch is turned to the off position (or operator

rises off seat). If mower drive belt does not stop

within five seconds, perform the PTO clutch

adjustment found in the “Regular Maintenance”

section or see your authorized dealer.

Once the engine has stopped, the

PTO switch must be turned off after

the operator returns to the seat in order

to start the engine.

A

B

C

D

E

F

If the unit does not pass a safety test, do

not operate it. See your authorized dealer.

Under no circumstance should you attempt

to defeat the purpose of the safety inter-

lock system.

A-5

Safety decals

This unit has been designed and manufactured to

provide you with the safety and reliability you would

expect from an industry leader in outdoor power

equipment manufacturing.

Although reading this manual and the safety

instructions it contains will provide you with the

necessary basic knowledge to operate this equipment

safely and effectively, we have placed several safety

labels on the unit to remind you of this important

information while you are operating your unit.

All DANGER, WARNING, CAUTION and

instructional messages on your rider and mower

should be carefully read and obeyed. Personal bodily

injury can result when these instructions are not

followed. The information is for your safety and it is

important! The safety decals below are on your rider

and mower.

If any of these decals are lost or damaged, replace

them at once. See your local dealer for replacements.

These labels are easily applied and will act as a

constant visual reminder to you, and others who may

use the equipment, to follow the safety instructions

necessary for safe, effective operation.

ROTATING CUTTING BLADE

Do not put hands or feet

under mower deck while

blade is rotating.

DANGER

1720660

Decal - Danger

Part No. 1720660

• Do not operate mower with rear grass catcher open

• Do not operate mower without catcher or discharge

deflector in place

1720661

WARNING

Decal - Danger

Part No. 1720661

DANGER

OPERATING ON SLOPES

CAN BE DANGEROUS

SEE OPERATOR'S MANUAL.

IF YOU CANNOT BACK-UP A HILL

—DO NOT DRIVE ON IT.

AVOID SERIOUS INJURY OR DEATH

• READ OPERATOR'S MANUAL(S).

• KNOW LOCATION AND FUNCTION OF ALL CONTROLS.

• KEEP SAFETY DEVICES (GUARDS, SHIELDS, & SWITCHES)

IN PLACE AND WORKING.

• REMOVE OBJECTS THAT COULD BE THROWN BY

THE BLADE.

• DO NOT MOW WHEN CHILDREN OR OTHERS

ARE AROUND.

• NEVER CARRY CHILDREN.

• LOOK DOWN AND BEHIND––BEFORE AND WHILE BACKING.

• AVOID SUDDEN TURNS.

• IF YOU CANNOT BACK UP A HILL,

DO NOT OPERATE ON IT.

• GO UP AND DOWN SLOPES, NOT ACROSS.

• IF MACHINE STOPS GOING UPHILL, STOP BLADE

AND BACK DOWN SLOWLY.

• BE SURE BLADE(S) AND ENGINE ARE STOPPED

BEFORE PLACING HANDS OR FEET NEAR BLADE(S).

• WHEN LEAVING MACHINE, SHUT OFF ENGINE,

REMOVE KEY, AND SET PARKING BRAKE.

WARNING

To Start Engine: When Operator Leaves Seat:

• Seat must be occupied, PTO switch off, and brake pedal

depressed, throttle at half to full, turn Ignition to START.

To STOP Engine:

• Engage parking brake, throttle at half to full, turn

Ignition switch to OFF.

• Engine will shut off if PTO is ON.

• Engine will shut off if parking brake is OFF.

Before Leaving Machine:

• Turn PTO switch OFF, shut off engine,

remove key, and set parking brake.

OPERATION

DO NOT TOW TRACTOR!

Damage may result to

hydrostatic transmission

1720658-01

ROTATING BLADES CUT OFF

ARMS AND LEGS

STOP MOWER WHEN CHILDREN ARE NEAR.

NO RIDERS — THEY FALL OFF.

DANGER

CUTTING HEIGHT ADJUST

• Turn clockwise to raise cutting height.

• Turn counter-clockwise to lower

cutting height.

THROTTLE

• ALWAYS operate at full throttle.

• Shut OFF at half to full throttle.

MOWER LIFT LEVER

• Raise lever to lift mower

up for transport.

• Lower lever to place mower

into cutting position.

• Operator must be in seat.

• Pull UP to engage.

• Push DOWN to disengage.

TO OPERATE PTO CLUTCH

CHOKE

• Pull knob OUT to engage.

• Push knob IN to disengage.

IGNITION SWITCH

OFF

RUN

START

• Remove key before

leaving tractor.

GROUND SPEED CONTROL

• Depress front ground speed pedal

to increase forward ground speed.

• Depress rear ground speed pedal

to increase reverse ground speed.

BRAKE PEDAL

• Depress brake pedal to slow or stop

tractor motion.

• To SET Parking Brake — fully depress

brake pedal and pull knob UP.

• To RELEASE Parking Brake — depress

brake pedal and push knob DOWN.

HOPPER RELEASE

• Depress to open hopper.

TRANSMISSION RELEASE VALVE

• PULL OUT to drive.

• PUSH IN to release.

Decal - Operating Instructions Bottom Panel

Part No. 1720658

North American Models

Decal - Danger

Part No. 1720389

1720390

Decal - Danger

Part No. 1720390

Decal - Danger

Part No. 1720391

Decal - Danger

Part No. 1721107

1721108

Decal - Danger

Part No. 1721108

1720392-01

10 Max.10 Max.

Decal - Operating Instructions Bottom Panel

Part No. 1720392

CE Models

A-6

Warning: Read Operator’s

Manual.

Read and understand the

Operator’s Manual before

using this machine.

Danger: Thrown Objects.

This machine is capable of

throwing objects and debris.

Keep bystanders away.

Warning: Remove Key

Before Servicing.

Remove the key and consult

technical literature before

performing repairs or

maintenance.

1720390

Danger: Thrown Objects.

Do not operate the unit with

hopper open.

Danger: Machine Rollover.

Do not use this machine on

slopes greater than 10°.

Danger: Dismemberment.

This machine can amputate

limbs. Keep bystanders and

children away when engine

is running.

Danger: Dismemberment.

This mower deck can

amputate limbs. Keep

hands and feet away from

blades.

Danger: Thrown Objects.

Do not operate the unit with

the hopper removed, or

without the deflector

installed.

1721108

Danger: Thrown Objects.

Do not open the hopper

door when the PTO is

engaged.

Danger: Thrown Objects.

Do not operate the unit

without first connecting the

discharge tube to the

mower.

CE Safety Icons

B-1

Features and controls

B-2

Features and controls

Headlight Switch

Choke

Mower Lift

Catcher Open

Catcher Full Alarm

Catcher Close

Fuel Tank

Throttle-Fast

Throttle-Slow

PTO Switch

Brake Pedal

Parking Brake

Ground Speed

Cutting Height Adjust

Ignition Switch

Seat Adjustment

Push Valve

Headlight

Choke

Mower deck lift

Catcher open

“Catcher full” alarm

Catcher close

Fuel tank

Throttle-Fast

Throttle-Slow

PTO switch

Brake pedal

Parking brake

Ground speed controls

Cutting height adjust

Ignition switch

Seat adjustment

Transmission release lever

Page is loading ...

MASSEY FERGUSON 1693494 User manual

This manual is also suitable for

MASSEY FERGUSON 1693494 User manual

Related papers

Other documents