Metos 76/02+4CTGG Operating instructions

Category
Cookers
Type
Operating instructions
SOLID TOPS
700 - Series
TYPE: 74/02CTG, 74/02TCTG, 74/02CTGG, 74/02+2CTGG, 74/02CTGE, 76/02CTG,
76/02CTGG, 76/02+4CTGG, 76/02TCTGG, 76/02CTGGE
Installation and Operation Manual
S/N: Rev.: 1.0
27.2.2004 Rev. 1.0
Dear Customer,
Congratulations on deciding to choose a Metos appliance for your kitchen activities. You
made an excellent choice. We will do our best to make you a satisfied Metos customer
like thousands of customers we have around the world.
Please read this manual carefully. You will learn correct, safe and efficient working meth-
ods in order to get the best possible benefit from the appliance. The instructions and hints
in this manual will give you a quick and easy start, and you will soon note how nice it is
to use the Metos equipment.
All rights are reserved for technical changes.
You will find the main technical data on the rating plate fixed to the equipment. When you
need service or technical help, please let us know the serial number shown on the rating
plate. This will make it easier to provide you with correct service.
For your convenience, space is provided below for you to record your local Metos service
contact information.
METOS TEAM
Metos service phone number:...............................................................................................
Contact person:....................................................................................................................
27.2.2004 Rev. 1.0
27.2.2004 Rev.
1. General .......................................................................................................... 1
1.1 Symbols used in the manual .......................................................................................... 1
1.2 Symbols used on the appliance ...................................................................................... 1
1.3 Checking correspondence between the appliance and the manual ................................ 2
2. Safety .............................................................................................................. 3
2.1 Using the appliance safely ............................................................................................. 3
2.2 Safety instructions in case of malfunction ..................................................................... 3
2.3 Additional prohibitions (hazardous procedures) ........................................................... 3
2.4 Disposing of the appliance ............................................................................................ 3
3. Functional description .................................................................................. 5
3.1 Intended use of the appliance ........................................................................................ 5
3.1.1 Prohibited use ........................................................................................................ 5
3.2 Construction .................................................................................................................. 5
3.2.1 Construction features ............................................................................................. 5
3.2.2 Cooking surfaces .................................................................................................... 6
3.2.3 Gas ovens ............................................................................................................... 6
3.2.4 Electric ovens ......................................................................................................... 7
3.2.5 Hot cupboard .......................................................................................................... 7
4. Operating instructions ................................................................................. 9
4.1 Before using the appliance ............................................................................................ 9
4.1.1 Preparing the appliance for use .............................................................................. 9
4.2 Using the appliance ..................................................................................................... 10
4.2.1 Operating controls ............................................................................................... 10
4.2.2 Turning the open burners on and off ................................................................... 11
4.2.3 Turning the solid top on and off .......................................................................... 11
4.2.4 Turning on the gas oven ....................................................................................... 12
4.2.5 Turning on the electric oven ................................................................................ 13
4.2.6 Turning on the hot cupboard ................................................................................ 13
4.2.7 Safety thermostat ................................................................................................. 14
4.2.8 Preheating ............................................................................................................ 14
4.3 After-use care .............................................................................................................. 14
4.3.1 Cleaning ............................................................................................................... 14
4.3.2 Idle period ............................................................................................................ 15
4.3.3 Periodic maintenance ........................................................................................... 16
27.2.2004 Rev.
5. Installation ................................................................................................... 17
5.1 General information ..................................................................................................... 17
5.1.1 Regulatory installation conditions ....................................................................... 17
5.2 Exhausting fumes ........................................................................................................ 17
5.3 Possible environmental interference ............................................................................ 18
5.4 Preparing for installation ............................................................................................. 18
5.5 Storage ......................................................................................................................... 18
5.6 Transporting the appliance .......................................................................................... 18
5.7 Unpacking the appliance ............................................................................................. 18
5.8 Disposing of packaging materials ............................................................................... 18
5.9 Positioning the appliance ............................................................................................. 19
5.10 Electrical connections (versions with electric oven and/or hot cupboard) ............. 19
5.10.1 General information ........................................................................................... 19
5.10.2 Connecting a type "Y" power cord to the appliance’s terminal block ............... 20
5.11 Gas supply connection ............................................................................................... 22
5.11.1 Changing gas inlet connection from the right to the left (optional) ................... 23
5.12 Checking the supply pressure of the gas after installation ........................................ 23
5.12.1 Initial phases only valid for models 76/02CTG, 76/02CTGG, 76/02TCTG,
76/02+4CTGG and 76/02CTGGE ................................................................................ 24
5.12.2 Initial phases only valid for models 74/02CTG, 74/02TCTG, 74/02CTGG,
74/02+2CTGG and 74/02CTGE ................................................................................... 25
5.12.3 Following phases valid for all models ............................................................... 26
5.13 Gas technical specifications ...................................................................................... 27
5.14 Checking operation .................................................................................................... 29
5.15 Staff training .............................................................................................................. 29
5.16 Rating plate ................................................................................................................ 29
6. Adjustment instructions ............................................................................. 31
6.1 Replacing open burner nozzles .................................................................................... 32
6.2 Replacing the nozzle of open burner pilot flames ....................................................... 34
6.3 Replacing oven burner nozzles ................................................................................... 35
6.4 Replacing the nozzle of the solid top burner ............................................................... 38
6.5 Replacing the nozzle of the oven or solid top pilot flame ........................................... 39
6.6 Adjusting minimum output .......................................................................................... 40
6.7 Functional check .......................................................................................................... 41
27.2.2004 Rev.
7. Troubleshooting .......................................................................................... 43
9. Technical specifications .............................................................................. 81
27.2.2004 Rev.
27.2.2004 Rev. 1.0
General
1
1. General
Read the instructions in this manual carefully, as they contain important information on
how to install, use and service the appliance safely, properly, and effectively.
Keep this manual in a safe place so that it can be used as reference by other operators of
the appliance.
This appliance should be installed following the instructions provided by the manufactur-
er and in compliance with all applicable local regulations. This appliance should be con-
nected to the power and gas supply by qualified personnel only.
All personnel in charge of using this appliance should be specifically trained in its opera-
tion.
In the event of failure or malfunction, switch off the appliance. The periodic functional
checks requested in this manual should be carried out according to the instructions. Have
the appliance serviced by a technically qualified person duly authorized by the manufac-
turer that uses genuine spare parts.
Failure to comply with the above may jeopardise the appliance’s safety.
1.1 Symbols used in the manual
This symbol informs about a situation where a safety risk could be imminent. The instruc-
tions provided are mandatory in order to prevent injury.
This symbol informs about the right way to act in order to prevent bad results, damage to
the appliance, or hazardous situations.
This symbol informs about tips and hints that help the user get the best performance out
of the appliance.
This symbol informs about a function that should be taken into account for self-control
purposes.
1.2 Symbols used on the appliance
This symbol on a part warns the user that there are electrical terminals behind it. There-
fore, this part should be removed by qualified personnel only.
27.2.2004 Rev. 1.0
General
2
1.3 Checking correspondence between the appliance and the manual
The rating plate of the appliance shows its serial number. If the manuals are missing, you
may order new ones from the manufacturer or your local representative. When ordering
new manuals it is essential to quote the serial number shown on the rating plate.
27.2.2004 Rev. 1.0
Safety
3
2. Safety
2.1 Using the appliance safely
Being an appliance designed only for professional use, it should be operated by qualified
personnel exclusively. Never leave the appliance unattended while it is on.
Do not move the appliance while hot.
2.2 Safety instructions in case of malfunction
If the appliance will remain idle for some time or in the event of a failure, abnormal op-
eration, etc., turn off the shutoff valve upstream of the appliance and disconnect it from
power supply. Call the service.
2.3 Additional prohibitions (hazardous procedures)
Never tamper with the seals of the adjusting screws located on the gas valves.
2.4 Disposing of the appliance
This appliance has been manufactured using recyclable raw materials and does not con-
tain any hazardous or toxic substances. To dispose of the appliance and all its packaging
materials, strictly follow the local regulations in force in the place where it is installed.
Packaging materials should be divided according to the type and delivered to a specific
collection site. Ensure compliance with environmental protection regulations.
27.2.2004 Rev. 1.0
Safety
4
27.2.2004 Rev. 1.0
Functional description
5
3. Functional description
3.1 Intended use of the appliance
The appliance is designed for use in the gastronomy and confectionery industries only.
3.1.1 Prohibited use
The manufacturer cannot be held liable for any faults caused by defective installation or
inappropriate use of the appliance. In such cases, the warranty shall be null and void.
3.2 Construction
3.2.1 Construction features
Supporting structure made of galvanized steel.
Exterior finish and height-adjustable feet are stainless steel type AISI 18/10.
Solid top plate and central ring are made of a special smoothed alloy (creusabro).
Control panels are conveniently shaped and have controls slanted towards the operator.
27.2.2004 Rev. 1.0
Functional description
6
3.2.2 Cooking surfaces
Fig. 1
1. Burner rated 3.5 kW (open burners)
2. Burner rated 5.6 kW (open burners)
3. Burner rated 7.9 kW (oven)
4. Burner rated 12 kW (solid top)
5. Burner rated 5.6 kW (mini solid top)
Plate with steel burner controlled by a valve equipped with safety thermocouple
and piezoelectric pilot flame ignition ;
temperature on the solid top adjustable from 50°C to 500°C (122°F to 932°F);
unit with 2 or 4 stabilised-flame gas burners made of nickel-plated cast iron and
controlled by pilot flames;
burner type:double-crown burner rated 3.5 kW (item 1 in Fig. 1) double-crown
burner rated 5.6 kW (item 2 in Fig. 1);
valves equipped with safety thermocouples to ensure that gas flow will be imme-
diately shut off in case of failures or if the burner is accidentally extinguished;
two-burner acid-resistant black enamelled cast-iron grates;
stainless steel drip pans.
3.2.3 Gas ovens
Stainless steel GN 2/1 static oven with temperature adjustable from 80°C to 300°C
(176°F to 572°F);
tubular steel burner rated 7.9 kW (item 3 in Fig. 1) with self-stabilising flame;
piezoelectric ignition of pilot flame;
safety valve fitted with thermocouple ensures that gas flow will be immediately
shut off in the event that a burner is extinguished accidentally or a failure occurs;
wire shelf support with two loading positions and a device to prevent tipping;
removable, high-radiance, ribbed cast-iron bottom plates;
silicone rubber oven door gasket, easily replaceable.
27.2.2004 Rev. 1.0
Functional description
7
3.2.4 Electric ovens
Stainless steel GN 2/1 static oven with temperature adjustable from 50°C to 300°C
(122°F to 572°F);
two sheathed heating units (top and bottom) separately adjustable through a selec-
tor switch and controlled by a single thermostat;
safety thermostat to prevent overheating;
knobs with watertight gasket;
wire shelf support with two loading positions and a device to prevent tipping;
removable stainless steel bottom plate;
silicone rubber oven door gasket, easily replaceable.
3.2.5 Hot cupboard
Heating provided by a sheathed heating element placed at the bottom of the cup-
board;
hot cupboard temperature adjustable from 50°C to 90°C (122°F to 194°F);
perforated stainless middle shelf, removable and adjustable to two heights;
interior size GN 2/1.
27.2.2004 Rev. 1.0
Functional description
8
27.2.2004 Rev. 1.0
Operating instructions
9
4. Operating instructions
4.1 Before using the appliance
4.1.1 Preparing the appliance for use
Before cooking food for the first time, we recommend cleaning the appliance thoroughly,
and especially the oven cooking chamber. Remove all packaging materials and adhesive
films from the appliance very carefully. Before cleaning the stainless steel parts, make
sure that the detergent you intend to use does not contain any abrasive substances and that
it is suitable for stainless steel surfaces. Wipe the appliance dry with a clean cloth.
Never use water jets to clean the appliance.
27.2.2004 Rev. 1.0
Operating instructions
10
4.2 Using the appliance
4.2.1 Operating controls
By way of example, below are represented two of the most comprehensive appliances in
this family. Refer to the "Installation and connection drawings" at the end of this manual
to see a precise graphic representation of your specific appliance.
Fig. 2
1. Ignition for solid top
2. Solid top knob
3. Hole to check solid top pilot flame ignition
4. Electric oven selector knob
5. Electric oven thermostat knob
6. Open burner knob
7. Hot cupboard knob
8. Ignition for gas oven
9. Gas oven knob
27.2.2004 Rev. 1.0
Operating instructions
11
4.2.2 Turning the open burners on and off
To light the pilot flame, press the knob and turn it anti-clockwise to the position
shown as item 2 in Fig. 3;
hold down the knob and at the same time place a flame next to the pilot burner;
after lighting the pilot flame, hold down the knob for 15 more seconds to allow the
thermocouple to heat. If the pilot flame goes out when you release the knob, repeat
the operation;
burner output can be controlled within a range between positions shown as item 3
and item 4 in Fig. 3;
to turn off the main burner, turn the knob clockwise to the position shown as item
2 in Fig. 3;
to turn off the pilot flame as well, turn the knob clockwise to the “OFF” position
as item 1, Fig. 3.
Fig. 3
1. "OFF" position
2. "PILOT FLAME LIGHTING" position
3. "HIGH" position
4. "LOW" position
4.2.3 Turning the solid top on and off
To light the pilot flame, press the knob and turn it anti-clockwise to the position
shown as item 2 in Fig. 3;
hold down the knob and at the same time push the ignition button (item 1 in Fig. 2);
check pilot flame ignition through the inspection hole provided in the front panel
of the appliance;
after lighting the pilot flame, hold down the knob for 15 more seconds to allow the
thermocouple to heat. If the pilot flame goes out when you release the knob, repeat
the operation;
burner output can be controlled within a range between positions shown as item 3
and item 4 in Fig. 3 (range HIGH-LOW);
to turn off the main burner, turn the knob clockwise to the position shown as item
2 in Fig. 3;
to turn off the pilot flame as well, turn the knob clockwise to the “OFF” position
as item 1in Fig. 3.
27.2.2004 Rev. 1.0
Operating instructions
12
4.2.4 Turning on the gas oven
To light the gas oven pilot flame, press and turn the knob anti-clockwise to the po-
sition shown as item 2 in Fig. 4;
hold down the knob and at the same time push the ignition button (see item 8 in
Fig. 2 further above);
check pilot flame lighting through the viewing hole located in the bottom plate of
the cooking chamber;
after lighting the pilot flame, hold down the knob for 15 more seconds in order for
the thermocouple to heat. If the pilot flame goes out when you release the knob,
repeat the operation;
oven temperature can be controlled within a range between positions shown as
item 3 and item 4 in Fig. 4 (80-300°C/176-572°F and all values in between);
to turn off the main burner, turn the knob clockwise to the position shown as item
2 in Fig. 4;
to turn off the pilot flame as well, turn the knob clockwise to the “OFF” position
as item 1 in Fig. 4.
An unpleasant smell the very first time it is operated can be considered as completely nor-
mal. In fact, this is due to the overheating of insulating materials and residues of oil used
during the metal working process. The first time you turn the oven on, don’t place any
food in the cooking chamber and set the temperature to 300°C (572°F) until the smell dis-
appears.
Fig. 4
1. "OFF" position
2. "PILOT FLAME LIGHTING" position
3. 80°C (176°F) position (lowest temperature)
4. 300°C (572°F) position (highest temperature)
Below are the average temperatures at the centre of chamber of the oven corresponding
to each knob position:
1. 80°C (176°F)
2. 110°C (230°F)
3. 140°C (284°F)
4. 180°C (356°F)
5. 220°C (428°F)
6. 260°C (500°F)
7. 300°C (572°F)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Metos 76/02+4CTGG Operating instructions

Category
Cookers
Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI