Passport
™
P2 AC
Plus 2 Port AC/DC
Multi-Charger
Manual Addendum
BLUETOOTH CONNECTION
Download the Dynamite Dashboard App from the iOS store or Google Play
store. All Charger features are accessible from the app.
Compatible with iOS and Android devices
1. Download the Dynamite Dashboard App from the iOS or Play Store.
2. Install the app and verify the Bluetooth is activated on the mobile device.
3. Power on the charger, and open the app. The app will open a dialog box
that says Bluetooth Device, touch the line that says charger to connect.
The Bluetooth Icon will illuminate on the charger when it is connected.
4. Set a password the fi rst time the app is opened. We suggest writing the
password on the back of the charger in permanent marker.
USING THE MOBILE APP
1. Touch and slide the selections to scroll between options.
2. Press the NEXT button when the correct selections have been made.
DYNAMITE DASHBOARD APP
It has come to our attention the manual for the Passport P2 AC/DC Multi-
Charger did not included instructions for using the mobile app. The information
in this addendum covers operation of the Dynamite Dashboard App.
Battery
Type
HOME PROGRAM SYSTEM
LiPo
LiIo
LiFe
LiHV
NiMH
NiCD
1
2
3
4
5
6
BAL. CHARGE
CHARGE
DISCHARGE
STORAGE
SCAN TO GO
FAST CHARGE
Battery
Cells
Operation
Mode
NEXT
Battery
Type
Battery
Type
L
Type
L
N
LiPo
LiIo
LiFe
LiHV
LiHV
LiFe
LiHV
NiMH
NiCD
LiHV
CH.DCH.B CH.CCH.A
2
SCAN TO GO
The Passport P2 can be automatically set with the SCAN TO GO feature by scanning
a compatible QR code. Check your battery for a compatible QR code. If you need to
add one, a QR code can be generated from within the Battery Memory section.
HOW TO GENERATE A QR CODE:
1. Add battery memory settings to match your battery.
2. Touch the QR code next to the battery memory, save it to the Gallery on your device.
3. Print the QR code and apply it to your battery.
Example settings shown, the app does not include any pre-
confi gured memory settings.
HOME PROGRAM SYSTEM
LiPo BAL. CHARGE
cells:3 Current:2.0A Voltage:4.20V
LiPo BAL. CHARGE
cells:6 Current:10.0A Voltage:4.20V
LiHV BAL. CHARGE
cells:4 Current:4.0A Voltage:4.35V
LiFe BAL. CHARGE
cells:2 Current:1.3A Voltage:3.6V
Battery
Type
HOME PROGRAM SYSTEM
LiHV
NiMH
NiCd
PB
3
4
5
6
7
8
SCAN TO GO
Battery
Cells
Operation
Mode
NEXT
CYCLE
DISCHARGE
CHARGE
HOW TO USE A QR CODE:
1. Touch the SCAN TO GO button from the HOME screen in the Dynamite
Dashboard App.
2. The camera will open on your device, use this to scan the QR code.
3. When the QR code is scanned it will apply the parameters, press START to
begin charging.
© 2019 Horizon Hobby, LLC. Dynamite, Passport, and the Horizon Hobby Logo are trademarks or registered trademarks of
Horizon Hobby, LLC. All other trademarks, service marks and logos are property of their respective owners.
60946 Created 12/2018
/