Vaterra VTR331016 Operating instructions

Vaterra
Brand
Vaterra
Model
VTR331016
Type
Operating instructions
Solid Mount Battery Tray Instructions
for use with the following Vaterra vehicles:
1986 Chevrolet K-5 Blazer Ascender 1/10 RTR (VTR03014)
Ascender Chevrolet K5 Blazer 1/10th 4WD Kit (VTR03023)
1972 Ford Bronco 4x4 Ascender 1/10th RTR (VTR03031)
1972 Chevrolet K10 Pickup Ascender 1/10th RTR (VTR03090)
1968 Ford F-100 Ascender: 1/10 4WD BND (VTR03093)
©2018 Horizon Hobby, LLC. Vaterra, the Vaterra logo, and Ascender are registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. General
Motors Trademarks and Ford Motor Company Trademarks are used under license to Horizon Hobby, LLC. All other trademarks, service marks and logos are property of their respective owners. US 9,592,724.
58583 VTR331016
NOTICE: Remove the floating battery tray before installing the full-sized battery tray conversion.
HINWEIS: Entfernen Sie das Fach für den Notstromakku, bevor Sie den Umbau des Akkufachs für die volle Leistung durchführen.
REMARQUE: Enlever le support de batterie flottant avant d’installer la conversion du grand support de batterie.
AVVISO: rimuovere il porta batteria flottante prima di installare la conversione per supporto batteria a dimensioni normali.
Use with 96mm “shorty” LiPo battery packs
Zu verwenden mit einem 96 mm „Shorty“ LiPo-Akku-Paket
Utiliser avec des packs de batteries Li-Po 96 mm shorty
Da utilizzare con pacco batteria LiPo corto da 96 mm
  • Page 1 1

Vaterra VTR331016 Operating instructions

Vaterra
Brand
Vaterra
Model
VTR331016
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents