125
monogram.com
Dishwashers
and compactors
Compact dishwashers
Custom panels
Custom panel for ZBD1850NII compact dishwasher
The ZBD1850NII dishwasher requires a field-installed 3/4"-thick
custom panel and a custom handle (not supplied). An installation
template is packed with this dishwasher and may also be
obtained in advance. Order Pub. No. 31-30244. Complete panel
installation instructions are printed on the template.
Custom panel size requirements
HEIGHT:
Panel height must be 26–25/32"
• If the panel height is more than 26-25/32", it will prevent
the door from swinging open.
• If the panel is less than 26-25/32", it will not cover the
dishwasher door frame.
• The top of the custom panel must be flush with the top of the
door. A 1/2" gap between the top of the door and the bottom
of the countertop must be maintained.
WIDTH:
Panel width must be 17-1/2"
• If the panel width is less than 17-1/2", it will not cover the
dishwasher door.
Monogram 18" dishwasher cutout dimensions and clearances
The serial plate is located on the tub wall just inside the door.
17-1/2"
26-25/32"
NOTE:
Maximum door
panel weight is
8 pounds
Compact dishwasher
ZBD1870NSS and ZBD1850NII
Overall dimensions
(WxHxD in inches):
17-3/8–18 x 32–35 x 24
Amps @120 Volts 9.0
Approx. shipping wt. (lbs.) 60
•
Compact design
•
Two-piece adjustable toekick
or custom toekick
•
For ZBD1850NSS a custom
panel and handle are required
ZBD1870NSS
Compact dishwasher general features
Flush installation. Allows the dishwasher to align with
surrounding cabinetry.
Hidden, integrated electronic controls. Allow for easy
activation of wash cycles: scour wash, normal wash, light
wash, china and rinse only.
Pearlescent gray, nylon-coated racks. Provide plenty of space
and loading flexibility. The lower rack includes a StemSafe
™
feature for odd-shaped items and delicate stemware.
Six-level wash system. Provides effective, yet quiet,
cleaning power.
Advance planning for compact dishwashers
Monogram dishwashers are designed for versatility, adaptable
to virtually any installation.
• These dishwashers may be installed beneath countertops
of stone or other materials that will not accept screws.
No kits required.
Supplied or custom toekick
• A two-piece toekick is supplied with models ZBD1850NII and
ZBD1870NSS. The toekick is height-adjustable.
• Depending on cabinetry style, a custom toekick can also be
installed on all 18" dishwashers to match cabinetry. Care must
be taken to assure door swing clearance above the toekick.
Electrical requirements
The dishwasher must be supplied with 120V, 60Hz, and
connected to an individual properly grounded branch circuit
protected by a 15- or 20-amp circuit breaker or time-delay fuse.
/
