Panasonic CQDFX751N Operating instructions

Brand: Panasonic

Model: CQDFX751N

Category: CD players

Type: Operating instructions

CQ-DFX751/DFX701/DFX601N

Laser Product

Label Indications and Their Locations

Caution: This product utilizes a laser.

Use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

Laser products:

Wave Length 780 nm

Laser Power No hazardous radiation is emitted with safety protection.

Do not take apart this unit or attempt to make any changes

yourself.

This unit is a very intricate device that uses a laser pickup to retrieve infor-

mation from the surface of compact discs. The laser is carefully shielded

so that its rays remain inside the cabinet.

Therefore, never try to disassemble the player or alter any of its parts

since you may be exposed to laser rays and dangerous voltages.

CLASS 1 LASER PRODUCT

Caution Label

Deck Ass’y

(Upper Side)

Precautions

Volume Level

For your driving safety, keep the volume level low enough

to be aware of road and traffic conditions.

Car Washing

To avoid electrical shorts which may cause fire, or other

damage, do not expose this product (including the speak-

ers and CDs) to water or excessive moisture.

Car Ventilation

If your car is parked for several hours in direct sunlight, the

temperature inside the car may become very high. It is

advisable to drive the car and give the interior a chance to

cool down before switching the unit on.

Power Supply

This product is designed to be used in a car having a 12-

Volt negative ground battery system.

Disc Mechanism

Do not insert coins or any small objects. Keep screwdrivers

and other metallic objects away from the disc mechanism

and disc.

Service

This product is made of precision parts. Do not attempt to

disassemble or adjust any parts. For repair, please consult

your nearest authorized Panasonic Service Center.

Note: The preset memory is cleared to return to the origi-

nal factory setting when the power connector or battery is

disconnected.

Panasonic welcomes you to their constantly growing family of electronic products owners.

We endeavor to give you the advantages of precise electronic and mechanical engineering, manufac-tured with careful-

ly selected components, and assembled by people who are proud of the reputation their work has built for our compa-

ny. We know this product will bring you many hours of enjoyment, and after you discover the quality, value and relia-

bility we have built into it, you too will be proud to be a member of our family.

¡APPAREIL À LASER DE CLASSE 1

¡KLASS 1 LASER APPARAT

¡LUOKAN 1 LASERPLAITE

DANGER!

Invisible laser radiation

when open. Avoid direct

exposure to beam.

VORSICHT! UNSICHTBARE LASERSTRAHLUNG!

WENN ABDECKUNG GEÖFFNET IST, NICHT DEM

LASERSTRAHL AUSSETZEN.

DANGER! Invisible laser radiation when

open. Avoid direct exposure to beam.

ADVARSEL! Usynligt laserlys udstråles

ved åbning. Undgå direkte bestråling.

VARO! Avattaessa ja suojalukitus ohitet-

taessa olet alttiina näkymättömälle

lasersäteilylle. Älä katso säteeseen.

VARNING! Osynlig lasersträlning när

denna del är öppnad och spärren är urkop-

plad. Betrakta ej strälen.

ADVERSEL! Usynlig laserstråling når

deksel åpnes og sikkerhedslås brytes.

Unngå eksponering for strålen.

CQ-DFX751/DFX701/DFX601N

CQ-DFX751N CQ-DFX701N CQ-DFX601N

S·HDB Yes Yes None

Loudness None None Yes

Sub-Woofer Out (Level) Yes (5V) Yes (5V) None

Pre-out (Level) 2 (Front/Rear) (5V) 2 (Front/Rear) (5V) 1 (Rear) (2.5V)

AUX Input Yes Yes None

LCD Color Blue Blue Red

Body Color Silver Black Black

Features

MODEL

Components

Remote Control Preparation

(Back side)

Lithium battery

Position B

Position A

Battery holder

Battery Installation

1. Remove the battery holder.

Pull the holder out at position B while

pushing position A as indicated.

2. Install the battery on the battery

holder.

Place the battery in the holder with

its (+) side upwards as shown.

3. Insert the battery holder.

Push in the battery holder back into

its original position.

Battery Notes

Remove and dispose of an old battery immediately.

Battery Information:

¡Battery Type: Panasonic lithium battery (CR2025) (Included)

¡Battery Life: Approximately 6 months under normal use (at room temperature)

Caution: Improper use of batteries may cause overheating, an explosion or

ignition, resulting in injury or a fire. Battery leakage may damage the unit.

¡Do not disassemble or short the battery. Do not throw a battery into a fire.

¡Keep batteries away from children to avoid the risk of accidents.

¡Follow local regulations when disposing of batteries.

Components

1. Operating Instructions .....................................................................................1

2. Supplied Hardware.................................................................1set (a page 26)

3. Warranty Card..................................................................................................1

Note: This operating instruction manual is for three models CQ-DFX751N, CQ-DFX701N and CQ-DFX601N.

The differences between these models are mentioned below. All illustrations throughout this manual represent model CQ-

DFX751N unless otherwise specified.

VOL

BAND

SET/AUTO·P

DISP

S·HDB

SOURCE

PWR

DIM

HDB

MUTE

TUNE

TRACK

P-SET

DISC

·C

EON PT

Y C

D REC

EIVE

R W

ITH FU

LL DO

T M

TRIX

DIS

PLAY

DAB CONTROL

CQ-DFX751N

DIM

VOL

MUTE

SOURCE

DISP

HDB

CQ-DFX751/DFX701/DFX601N

Note : When you use this unit for the

first time, a demonstration message

appears on the display.

To cancel this display, press [DISP].

Power

ON : Press [SOURCE].

Source

Press [SOURCE] to change the source.

Volume

[VOL}] : Up

[VOL{] : Down

Mute/ATT (Attenuation)

MUTE/ATT ON : Press [MUTE].

MUTE/ATT OFF : Press again.

Decreasing volume range depends on setting.

(MUTE/ATT setting

a page 24)

Note : The sound level for each source is

stored in memory.

(For radio, one volume setting for AM, one vol-

ume setting for all FMs)

OFF : Press [SOURCE] again and hold for more than 1

second.

A security message is displayed, and the warning

alarm that reminds you to take the panel off.

(When S-LED is set to ON

a page 24)

Setting Range : 0 to 40

: No sound

: Decrease the volume to

1/10 of previous level.

Turn the key in the ignition until the accessory

indicator lights.

General

[VOL}] [VOL{] (Volume)

[DISP] (Display)

[MUTE]

[SOURCE]

(Power)

[HDB] (S•HDB)

(CQ-DFX751/DFX701N)

[LOUD]

(CQ-DFX601N)

[VOL}] [VOL{]

(Volume)

[DISP] (Display)

[MUTE]

[SOURCE]

(Power)

[DIM] (Dimmer)

Note: When ACC selection is set to ON, security mes-

sage and warning alarm are performed after turning off

the ignition key. (

a page 24 about ACC selection)

(When a CD is in the player)

(When a CD changer is connected

and magazine is in the changer)

(Only for CQ-DFX751/DFX701N)

(When AUX-IN setting is set to

ON) (a page 24)

(When DAB tuner is connected

a for DAB control, please refer

to the attached Operation Guide

for CY-DAB2000N)

Radio

DAB

CD Player

CD Changer

Auxiliary

CQ-DFX751/DFX701/DFX601N

When Power is ON

Press [DISP].

Display Change

Mode Display

Mode & Spectrum

Analyzer Display

When Power is OFF (when ACC Selection is set to ON)

Press [DISP].

Clock Display

(Back light is on) (Back light is off)

Display OFF

Spectrum Analyzer Display *1

Display OFF *2 Mode & Clock Display

AUDIO Indicator

*1 If you press a button, the

Mode & Spectrum Analyzer

Display appears for 5 sec-

onds.

*2 If you press a button, the

light is turned on, the Mode

Display appears, and the

light is turned off approxi-

mately 5 seconds later.

Notes :

¡Set the Spectrum Analyzer pattern in a separate procedure. (a page 22)

¡“NO CT” is displayed before adjusting the clock. (Adjustment a page 22)

Active Indicator Display

(Only for CQ-DFX751/DFX701N)

Press and hold [DISP] for more than 2 seconds.

Indicators which are not displayed on Mode Display are displayed.

Press

[DISP] again to cancel.

Note : See page 24 about ACC Selection setting.

Super High Definition Bass

(S•HDB)

(Only for CQ-DFX751/DFX701N)

Especially for rock music, the bass-sound will be more

powerful.

Press

[HDB] on the main unit to change the Super High

Definition Bass on.

Dimmer

Press [DIM] on the main unit to change the dimmer level.

DIMMER 3

DIMMER 2

DIMMER 1

•

HDB OFF

•

HDB BOOM

•

HDB TIGHT

The bass sound of the speakers

are strongly emphasized.

The bass sounds of the speakers

are moderately emphasized. (The

sounds of the Sub-Woofer can be

heard clearly.)

Loudness (Only for CQ-DFX601N)

Press [LOUD] on the main unit to switch the Loudness

mode on or off.

(Brighter) (Default)

(Medium)

(Darker)

VOL

ENU

BAND

SET/AUTO·P

REM

OTE

PTY

DISP

S·HDB

SOURCE

PWR

DIM

HDB

MUTE

TUNE

TRACK

-SE

ISC

CH·C

EON

Y C

CD RECEIVER WITH FULL DOT MATRIX DISPLAY

DAB CONTROL

CQ-DFX751N

D·M

P-SET

DISC

BAND

SOURCE

TUNE

TRACK

CQ-DFX751/DFX701/DFX601N

Radio Mode Display

Radio Mode

Press [SOURCE] to select the radio

mode.

Band

Press [BAND].

Note: The stereo indicator lights during

reception of an FM stereo broadcast.

Tuning

[TUNE[] / [[] : Up

[TUNE]] / []] : Down

Press and hold

[TUNE[] or [TUNE]] /

[[] or []]

for more than 0.5 seconds,

then release. Seeking will start.

FM1

FM2

FM3

AM (LW/MW)

Radio

[BAND]

(Auto preset memory/Set)

[SOURCE]

[TUNE]] [TUNE[]

[P·SET}] [P·SET{]

(Preset station/Select)

[SOURCE]

[}] [{]

(Preset station/Select)

[1] to [6] (Preset station)

[BAND] (Auto preset memory/Set)

[]] [[] (Tune)

Band

Frequency

Stereo Indicator

Mono/Local Selection

MONO ON : Noise is significantly decreased when weak signals are received

from an FM broadcast station.

LOCAL ON : In seek tuning, only strong stations are detected.

LOCAL OFF: Relatively weak stations are picked up.

q Press [MENU] / [SEL] during radio (FM or AM) mode.

w Press [P·SET}]

or [P·SET{] / [}] or [{] to select MONO or LOCAL.

(in AM mode, only LOCAL can be selected.)

e Press [BAND] to switch on or off in turn.

Notes:

¡If no keys have been pressed for more than 15 seconds, the display returns to the previous one after changing to the

menu display.

¡Press [DISP] to return to the regular mode.

FM Menu Display

AM Menu Display

[MENU]

[SEL] (Menu)

CQ-DFX751/DFX701/DFX601N

One-touch Selection of a Preset Station

Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.

Manual Preset

Memory

Manually save a station in

the preset memory.

Select a band and frequency (step

q, w and e on the previous page)

q Press and hold

[P·SET}] or [P·SET{] / [}] or [{] for more

than 2 seconds until the preset number blinks.

w Press [P·SET}] or [P·SET{] / [}] or [{] to select a preset

number.

e Press and hold [P·SET}] or [P·SET{] / [}] or [{] for more

than 2 seconds to memorize.

The display blinks once, and a receiving

station is saved in the memory.

Note: Frequency setting can be performed even after selecting a preset

number.

Entering numbers directly from the remote control

Select a band and frequency (step q, w and e on the previous page)

Press and hold

[1] to [6] on the remote control for more than 2 seconds.

Auto Preset

Memory

Automatically save strong

stations in the preset

memory.

Select a band (step

q, w on the previous page)

Press and hold

[BAND] for more than

2 seconds.

¡The 6 strongest available stations will be automatically saved in the memory

under preset numbers 1

to 6.

¡Once set, the preset stations are sequentially scanned for 5 seconds each.

¡To stop the scanning, press [P·SET}]

or [P·SET{] / [}] or [{].

(Pressing [1] to [6] on the remote control also can stop the scanning.)

Preset Station

Calling

Select a band (step q, w on the previous page)

Press

[P·SET}] or [P·SET{] / [}] or [{] to select the preset number

for tuning in the preset station.

Press

[1] to [6] on the remote control.

Note: New stations are overwritten on existing saved stations after following this procedure.

Entering numbers directly from the remote control

Scanning

CQ-DFX751/DFX701/DFX601N

Radio Data System (RDS)

RDS Basics

Some FM stations are broadcasting added data compatible with RDS. This radio set offers convenient functions using such

data.

RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following ser-

vice is not available, either. This chapter explains the summary and operation regarding RDS.

The following functions are available when receiving RDS stations.

Program Service Name (PS)

Display

The name of station is displayed.

Alternative Frequency (AF)

When reception is poor, an RDS station broadcasting the

same program is tuned in automatically.

Best Station

Best Station Research is automatically activated to store

the station with the best reception for each preset button.

Traffic Program (TP)

Some RDS FM stations periodically provide traffic infor-

mation.

The program which broadcast the traffic information is

called Traffic Program (TP).

Traffic Announcement (TA)

Radio announcements on traffic conditions.

Clock Time (CT) Service

When receiving an RDS station, the CT (Clock Time) ser-

vice automatically adjusts the time.

"-- : --" is displayed in areas where CT service is not avail-

able. (a Page 22 for Clock Adjustment)

Program Type (PTY) Display

RDS FM stations provide a program type identification

signal.

Example: news, rock, classical music, etc.

VOL

SET/AUTO·P

REMOTE

PTY

DISP

S·HDB

OPEN

SOURCE

PWR

DIM

HDB

UTE

TUNE

TRACK

P-SET

DISC

CH·C

CD RECEIVER WITH FULL DOT MATRIX DISPLAY

CQ-DFX751N

DIM

P-SET

DISC

BAND

SOURCE

TUNE

TRACK

CQ-DFX751/DFX701/DFX601N

Alternative Frequency (AF)

Alternative Frequency (AF) mode

Press and hold [DIM] on the main unit

for more than 2 seconds to switch the AF

mode on or off.

Default : AF ON

Auto Preset Memory

When AF ON is selected, only

RDS stations will be memo-

rized automatically.

(a Page 9 for auto preset

memory)

* New stations are overwrit-

ten on existing saved sta-

tions after following this

procedure.

[}]

(Select)

[{]

(Select)

[SEL]

(Menu)

Preset buttons

[BAND]

(Set)

AF Level and REG Mode

AF Level

Press [BAND] to change the AF level.

Program Identification (PI) Seek

(Only for remote control)

If Best Station does not work properly and reception is poor when

tuning in a preset station, press the same preset number button

again. PI Seek will search an AF station with good reception.

q Press [MENU] / [SEL] to display the menu.

w Press [P·SET}] or [P·SET{] / [}] or [{] to select an item.

AF 1

Low level AF sensitivity

Region (REG) Mode

Changes the selection range of AF and PI Seek.

Press [BAND] to switch on or off in turn.

AF 2

High level AF sensitivity

[BAND] (Set)

[P·SET{] [P·SET}] (Select)

[MENU]

[DIM] (AF mode)

REG ON

REG OFF

The frequency is changed only for programs

within the region.

The frequency is changed also for programs

outside the region.

FM Menu Display

When AF is on

(Default)

Note: When REG mode is switched from ON to OFF or vice versa, AF mode turns on automatically.

VOL

BAND

SET/AUTO·P

REMOTE

PTY

DISP

S·HDB

OPEN

SOURCE

PWR

DIM

HDB

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

CD RECEIVER WITH FULL DOT MATRIX DISPLAY

CQ-DFX751N

VOL

BAND

TUNE

TRACK

CQ-DFX751/DFX701/DFX601N

Radio Data System (RDS) (continued)

Traffic Announcement (TA)

Traffic Announcement (TA) mode

[]]

(TP Seek tuning)

[[]

(TP Seek tuning)

[BAND]

(TP auto preset memory)

TP Seek Tuning

When TA ON is selected, only

traffic program will be searced.

Press and hold [TUNE]] or

[TUNE[] / []] or [[] for

more than 0.5 seconds, then

release. Seeking will start.

TP Auto Preset Memory

When TA ON is selected, only

traffic program will be memo-

rized automatically.

Press and hold [BAND] for

more than 2 seconds.

* New stations are overwritten on

existing saved stations after

following this procedure.

TA on

TA off

Press [TA] on the main unit to switch the TA

mode on or off.

Searches for and tunes into traffic information

broadcasts automatically when set to TA on.

TA Volume Set

While listening to an FM station

(including a traffic information

announcement), press and hold

[TA] for more than 2 seconds to

store the volume level as the TA

Volume level.

Muting in TA mode

To listen to only traffic information

announcements. While listening to

an FM station which is not current-

ly broadcasting traffic information,

press [VOL{] to set the volume

to 0. The traffic information

announcement will be output at the

TA volume level.

[TA]

(TA mode/Volume set)

[VOL}] [VOL{] (Volume)

[TUNE]] [TUNE[] (TP seek tuning)

[BAND] (TP auto preset memory)

When TA is on

When Traffic Information is received

TA Standby Mode

When set to TA ON with the unit in

another mode (CD, CD changer,

etc.) it will automatically switch to

radio mode and output the traffic

information.

When the traffic information has

finished, the unit will return to the

previous mode.

VOL

BAND

SET/AUTO·P

REMOTE

PTY

DISP

S·HDB

OPEN

SOURCE

PWR

DIM

HDB

UTE

TUNE

TRACK

P-SET

DISC

CH·C

CD RECEIVER WITH FULL DOT MATRIX DISPLAY

CQ-DFX751N

BAND

TUNE

TRACK

CQ-DFX751/DFX701/DFX601N

Program Type (PTY) Reception

Program Type (PTY) mode

PTY on

PTY off

Press and hold [MENU] / [SEL] for more than 2

seconds to switch the PTY display mode on or off.

PTY Selection

q Press [TUNE[] / [[] to change the program type as

shown on the right. ([TUNE]] / []] : opposite direc-

tion)

w Select the desired program and press [BAND]. Seek will

start to tune in to a station broadcasting the selected pro-

gram type.

SPEECH / MUSIC / NEWS / AFFAIRS /

INFO / SPORT / EDUCATE / DRAMA /

CULTURE / SCIENCE / VARIED / POP M /

ROCK M / EASY M / LIGHT M / CLASSICS /

OTHER M / WEATHER/ FINANCE / CHILDREN /

SOCIAL / RELIGION / PHONE IN / TRAVEL /

LEISURE / JAZZ / COUNTRY / NATION M /

OLDIES / FOLK M / DOCUMENT/ SPEECH

PTY Language Selection

q Press [MENU] / [SEL] to display the DISPLAY LANGUAGE

menu and press [BAND].

w Press [P·SET}] or [P·SET{] / [}] or [{] to select

the PTY display language, and press [BAND].

[SEL]

(PTY mode/menu)

[}]

(Select)

[{]

(Select)

[]]

(PTY select)

[[]

(PTY select)

[BAND]

(PTY search/Set)

[BAND]

(PTY search/Set)

[TUNE]] [TUNE[] (PTY select)

[MENU]

(PTY mode/menu)

[P·SET{] [P·SET}] (Select)

PTY Mode Display

Note

: When there is no corresponding program type, “NONE” is displayed for 2 seconds.

VOL

BAND

SET/AUTO·P

REMOTE

PTY

DISP

S·HDB

OPEN

SOURCE

PWR

DIM

HDB

UTE

TUNE

TRACK

P-SET

DISC

CH·C

CD RECEIVER WITH FULL DOT MATRIX DISPLAY

CQ-DFX751N

P-SET

DISC

BAND

TUNE

TRACK

CQ-DFX751/DFX701/DFX601N

Radio Data System (RDS) (continued)

Program Type (PTY) Reception

PTY Preset Call

Program types are stored in memory under preset memory number 1 to 6 as shown in the table on the next

page. To select the desired program type, press [P·SET}] or [P·SET{] / [}] or [{].

PTY Preset Change

q Select the desired program type by using PTY Selection or

PTY Preset Call.

w Press and hold [P·SET}] or [P·SET{]/ [}] or [{]

for more than 2 seconds to select the preset memory

mode.

e Press [P·SET}] or [P·SET{]/ [}] or [{] to select

the desired preset number.

r Press and hold [P·SET}] or [P·SET{] / [}] or [{]

for more than 2 seconds to memorize.

Preset PTY Search

q Select a program type by PTY preset call.

w Press [BAND] to tune in the desired program

type station.

Preset buttons

[BAND]

(Preset PTY search)

[P·SET{] [P·SET}] (PTY preset call/change)

[}]

(PTY preset call

/change)

[{]

(PTY preset call/change)

[BAND]

(Preset PTY search)

*On the remote control, press and hold the preset

buttons for more than 2 seconds.

Note: When there is no corresponding program

type, “NONE” is displayed for 2 seconds.

Preset Number Program Type

CQ-DFX751/DFX701/DFX601N

Program Type (PTY) Reception

Other RDS functions

PTY Preset (Default)

Preset No. Program Type When PTY search is activated, these program type is receivable.

1 NEWS NEWS

2 SPEECH AFFAIRS, INFO, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED,

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN,

TRAVEL, LEISURE, DOCUMENT

3 SPORT SPORT

4 POP M POP M

5 CLASSICS CLASSICS

6 MUSIC ROCK M, EASY M, LIGHT M, OTHER M, JAZZ, COUNTRY, NATION M,

OLDIES, FOLK M

Enhanced Other Network (EON)

When EON data is received, the EON indicator lights and

the TA and AF functions are expanded as follows.

TA : Traffic information from the current and other net-

work stations can be received.

AF : The frequency list of preset RDS stations is updat-

ed by EON data.

EON enables the radio to make fuller use of RDS informa-

tion. It constantly updates the AF list of preset stations,

including that currently tuned in to. For example, if you

preset a station far from home, you will later be able to

receive the same station at an alternative frequency, or

any other station serving the same program. EON also

keeps track of locally available TP stations for quick

reception.

Emergency Announcement

Reception

When an emergency announcement is broadcast, the unit

is automatically switched to receiving that broadcast.

(Even when in CD mode, CD changer mode, etc.). During

receiving the emergency announcement, "ALARM" blinks

on the display.

VOL

BAN

SET/AUTO·P

REMOTE

PTY

DISP

S·HDB

OPEN

SOURCE

PWR

DIM

HDB

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

CD RECEIVER WITH FULL DOT MATRIX DISPLAY

B C

CQ-DFX751N

P-SET

DISC

BAND

DISP

SOURCE

TUNE

TRACK

CQ-DFX751/DFX701/DFX601N

SET/AUTO·P

DISP

S·HDB

SOURCE

PWR

DIM

HDB

TUNE

TRACK

P-SET

DISC

·C

CD RECEIVER WITH FULL DOT MATRIX DISPLAY

AB C

CQ-DFX751N

CD Player Mode Display

Open the Front Panel

Press [OPEN] on the front panel.

Disc Insert

Playback starts. Close the front panel.

Notes :

¡Do not insert a disc when indicator lights.

¡Loading a CD when the power is off allows the

power to be turned on. (When ACC Selection is

set to ON a

page 24)

¡Ejecting the CD when the unit is in the CD mode

allows the mode returns to the previous one.

When CD is in the player

Press [SOURCE] to select the CD player mode

and playback starts.

Pause

Press [BAND] to pause the CD playback.

Press again to resume the playback.

Track Selection

[TRACK2] / [[] : Next track

[TRACK1] / []] : Beginning of the current

track

Previous track

(Press twice.)

Track Search

Press and hold.

[TRACK2] / [[] : Fast forward

[TRACK1] / []] : Fast reverse

To Stop and Eject the Disc

Press [u].

Cautions:

¡Only 12 cm CD can be played by this unit.

¡To avoid damaging the front panel, do not push it down or place objects on it while it is open.

¡Do not use irregularly shaped CDs.

Do not pinch your finger or hand in the front panel. Do not insert foreign matter into the disc slot.

[DISP] (Return)

[BAND]

(Pause/Set)

[SOURCE]

[TRACK 1] [TRACK2]

[MENU]

[P·SET}] [P·SET{]

(Select)

[4] (Random)

[6] (Repeat)

[SEL] (Menu)

[]] [[] (Track)

[DISP]

(Return)

[5] (Scan)

[SOURCE]

[}] [{]

(Select)

[BAND]

(Pause/Set)

CD Player

Label Side

Track Number

Play Time

When a CD is inside

(Blinks during CD play)

Scan, Random and

Repeat Indicator

CQ-DFX751/DFX701/DFX601N

CD Mode Setting

q Press [MENU] / [SEL] during CD playing.

w Press [P·SET}]

or [P·SET{] / [}] or [{] to select an item.

e Press [BAND] to switch on or off in turn.

Repeat Play

Play Settings

Notes:

¡If no keys have been pressed for more than 15 seconds, the display returns to the previous one after changing to the

menu display.

¡Press [DISP] to return to the regular mode.

Select

REP

: Repeat the current selection.

: Cancel

OFF

Random Play

Select

RAND

: All the available tracks are played in a random

sequence.

: Cancel

OFF

Scan Play

Select

SCAN

: The first 10 seconds of each track play in

sequence.

: Cancel

OFF

Direct play setting from remote control when the menu is not displayed

Press [4] (Random) / [5] (Scan) / [6] (Repeat) on the remote control. Press again to cancel.

CD Menu Display

CQ-DFX751/DFX701/DFX601N

VOL

BAND

SET/AUTO·P

REMOTE

PTY

DISP

S·HDB

OPEN

SOURCE

PWR

DIM

HDB

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

CD RECEIVER WITH FULL DOT MATRIX DISPLAY

CQ-DFX751N

P-SET

DISC

BAND

DISP

SOURCE

TUNE

TRACK

CD Changer Mode

Press [SOURCE] to select the CD changer

mode and play back starts

Note : Load a magazine with CDs when “NO

DISC” is displayed.

Disc Selection

[DISC}] / [}] : Next disc.

[DISC{] / [{] : Previous disc.

Track Selection

[TRACK2] / [[] : Next track.

[TRACK1] / []] : Beginning of the cur-

rent track.

Previous track (Press

twice)

Track Search

Press and hold.

[TRACK2] / [[] : Fast forward

[TRACK1] / []] : Fast reverse

CD changer functions are designed for optional Panasonic CD changer unit.

Connect the CD changer, and load a magazine.

When the unit is connected with a CD text recognizable CD changer (CX-DP9061EN, for example), CD text can appear on

the display.

Notes :

¡Loading a magazine when the power is off allows the power to be turned on. (When ACC Selection is set to ON a

page

24)

¡Ejecting the magazine when the unit is in the CD changer mode allows the mode returns to the previous one.

CD Changer Control

[BAND]

(Set/Changer select)

[SOURCE]

[TRACK 1] [TRACK2]

[MENU]

[P·SET/DISC}] [P·SET/DISC{]

(Select)

[4] (Random)

[6] (Repeat)

[SEL] (Menu)

[]] [[]

(Track)

[DISP]

(Return)

[5] (Scan)

[}] [{]

(Disc/Select)

[BAND]

(Set)

CD Changer Mode Display

[SOURCE]

[DISP] (Return)

Disc Number

Play Time

When a CD changer is

connected

(Blinks during CD

changer play)

Scan, Random and

Repeat Indicator

Track Number

CD Changer Selection

Preparation: Connect another CD changer by using an optional dual CD changer selector (CA-CD55EN).

Press [BAND] to select CD changer 1 or CD changer 2.

When CD changer 2 is selected.

Note: This selection is not possible when there is no magazine

in the CD changer.

CQ-DFX751/DFX701/DFX601N

CD Changer Mode Setting

q Press [MENU] / [SEL] during CD changer playing.

w Press [P·SET}]

or [P·SET{] / [}] or [{] to select an item.

e Press [BAND] to switch on or off in turn.

Play Settings

Notes:

¡If no keys have been pressed for more than 15 seconds, the display returns

to the previous one after changing to the menu display.

¡Press [DISP] to return to the regular mode.

Random Play

Select

RAND

: All the available tracks on all discs in the magazine

are played in a random sequence.

: Cancel

OFF

Select

D. RAND

: All the available tracks on current disc are played in a

random sequence.

: Cancel

OFF

Scan Play

Select

SCAN

: The first 10 seconds of each track on the discs plays

in sequence.

: Cancel

OFF

Select

D. SCAN

: 10 seconds from the first track of each disc in the

magazine is played.

: Cancel

OFF

Repeat Play

Select

REP

: Repeat the current selection.

: Cancel

OFF

Select

D. REP

: Repeat the current disc selection.

: Cancel

OFF

CD Changer Menu Display

Direct play setting from remote control when the menu is not displayed

Press [4] (Random) / [5] (Scan) / [6] (Repeat) on the remote control. Press again to cancel.

Press and hold

[4] (Disc Random) / [5] (Disc Scan) / [6] (Disc Repeat) for more than 2 seconds on the remote control.

Press and hold again for more than 2 seconds to cancel.

Title Display

Title Information

Select

TITLE

: Display

: No display

¡“NO TITLE” is displayed when there is no information.

¡When the title display is set to ON, the mode display appears.

OFF

Title Scroll

Select

TITLE SCROLL

: Continuous scroll

: Scroll stops after a circle scroll

Press and hold

[BAND] for more than 2 seconds to

have an another circle scroll.

OFF

When the unit is connected with a CD text recognizable CD changer (CX-DP9061EN, for example), CD text can appear on

the display.

CQ-DFX751/DFX701/DFX601N

VOL

BAN

SET/AUTO·P

REMOTE

PTY

DISP

S·HDB

OPEN

SOURCE

PWR

DIM

HDB

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

CD RECEIVER WITH FULL DOT MATRIX DISPLAY

CQ-DFX751N

P-SET

DISC

BAND

DISP

TUNE

TRACK

Bass and Treble

Turn the bass/treble level up or down

Default : level 0

Setting range : – 12 to +12 (in 3dB step)

Press [MENU] / [SEL] to

select AUDIO.

FUNCTION

PICTURE

AUDIO

Current Source

Press [P·SET}] or

[P·SET{] / [}] or

[{] to select.

Press

[BAND] to set.

BAS/TRE

Press [P·SET}] or

[P·SET{] / [}] or

[{] to select.

Press

[BAND] to set.

SUB WOOFER

Audio Setting – AUDIO Menu

[BAND] (Set)

[TUNE]] [TUNE[] (Select)

[MENU]

[P·SET}] [P·SET{]

(Select/Adjust)

[DISP]

(Return)

Balance and Fader

You can adjust the sound balance among the

front, rear, right and left speakers.

Default : L/R(Balance) : Center

FRONT/REAR(Fader) : Center

Setting range : 15 levels each

Sub-Woofer Volume

(Only for CQ-DFX751/DFX701N)

Default : 4

Setting range :0 to 8

Sub-Woofer Low Pass

Filter

(Only for CQ-DFX751/DFX701N)

Select the upper limit frequency of the sound

from Sub-woofer

Default : 120Hz

Frequency : 80Hz or 120Hz

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select.

Press

[BAND] to set.

BAL/FAD

Press [MENU] / [SEL].

Press [}] or [{].

AUDIO Menu Display

CQ-DFX751/DFX701/DFX601N

Notes:

¡If no keys have been pressed for more than 15 sec-

onds, the display returns to the previous one after

changing to the menu display.

¡Press [DISP] to return to the regular mode.

[]] [[]

(Select)

[}] [{]

(Select/Adjust)

[BAND] (Set)

[SEL] (Menu)

[DISP] (Return)

[P·SET}] / [}] : Front enhanced

[P·SET{] / [{] : Rear enhanced

FRONT/REAR (Fader)

[TUNE[] / [[] : Right enhanced

[TUNE]] / []] : Left enhanced

L/R (Balance)

Press [BAND] to set.

w [P·SET}] / [}] : Enhanced

[P·SET{] / [{] : Decrease

q [TUNE[] / [[]

or [TUNE]] / []]

: Select "BAS" (Bass) or "TRE"(Treble)

e Press [BAND] to set.

q [P·SET}] / [}]

or [P·SET{] / [{] : Select "LEVEL”

w [TUNE[] / [[] : Enhanced

[TUNE]] / []] : Decrease

e Press [BAND] to set.

q [P·SET}] / [}]

or [P·SET{] / [{] : Select "LPF"

w [TUNE]] / []] : No more than 80Hz

[TUNE[] / [[] : No more than 120Hz

e Press [BAND] to set.

Press [}] , [{] , []] or [[], and press [BAND].

CQ-DFX751/DFX701/DFX601N

VOL

BAND

SET/AUTO·P

REMOTE

PTY

DISP

S·HDB

OPEN

SOURCE

PWR

DIM

HDB

MUTE

TUNE

TRACK

P-SET

DISC

CH·C

CD RECEIVER WITH FULL DOT MATRIX DISPLAY

CQ-DFX751N

P-SET

DISC

BAND

ISP

TUNE

TRACK

Spectrum Analyzer

Display Pattern

Default : Pattern A

Variety : 6 types

Contrast

Allows you to adjust the display contrasts for

better viewing.

Default : Level 3

Setting range : Level 1 to Level 5

Clock Display

Default : ON (Not adjusted. “--:--” will appear.)

Clock Adjustment

When receiving an RDS station, the clock time

(CT) service automatically adjusts the time.

(

a page 10) If CT service is not available,

adjust the clock.

Default : Not adjusted. “0:00”

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select.

Press

[BAND] to set.

S·A PATTERN

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select.

Press

[BAND] to set.

CONTRAST

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select.

CLOCK

Press [P·SET}] or

[P·SET{] / [}] or [{]

to select.

Press

[BAND] to set.

CLOCK ADJ

Display Setting – PICTURE Menu

[BAND] (Set)

[TUNE]] [TUNE[] (Select/Adjust)

[MENU]

[P·SET}] [P·SET{]

(Select/Adjust)

[DISP]

(Return)

Press

[MENU] / [SEL] to

select PICTURE.

FUNCTION

PICTURE

AUDIO

Current Source

PICTURE Menu Display

Press [MENU] / [SEL].

Press [}] or [{].

CQ-DFX751/DFX701/DFX601N

Notes:

¡If no keys have been pressed for more than 15 sec-

onds, the display returns to the previous one after

changing to the menu display.

¡Press [DISP] to return to the regular mode.

[P·SET}] / [}]

: Put forward hour/minute.

[P·SET{] / [{] : Put back hour/minute.

Hour / Minute Switch

[TUNE]] / []] : The hour display

[TUNE[] / [[] : The minute display

Hour / Minute Adjustment

Press [BAND] to set.

[TUNE[] / [[] : Level up

[TUNE]] / []] : Level down

Press

[BAND] to set.

Press

[BAND] to switch on or off in turn.

: Clock display ON

: Clock display OFF

OFF

[TUNE[] or [TUNE]] / [[] or []] to change.

Press

[BAND] to set.

: Display showing a cube that continues to

change

: Display showing a globe that continues to

change

: Display showing a flower or doll pattern

: Display showing a bird flapping its wings

: Display showing the image of a circuit

: Standard spectrum analyzer display (9 band)

STD

Note: Switch the screen display to have the Spectrum Analyzer Display. (a page 7)

[]] [[]

(Select/Adjust)

[}] [{]

(Select/Adjust)

[BAND] (Set)

[SEL] (Menu)

Clock Display

[DISP] (Return)

Press [}] , [{] , []] or [[], and press [BAND].

Page is loading ...

Panasonic CQDFX751N Operating instructions

Brand: Panasonic

Model: CQDFX751N

Category: CD players

Type: Operating instructions

Download PDF

report

Panasonic CQDFX751N Operating instructions

Panasonic CQDFX751N Operating instructions

Related papers

Other documents