Pairing IconJacket to Mobile Phone
To pair your mobile phone with the BTM module, rst make
sure the BTM module is switched off.
Than press and hold the play/pause key for six seconds
until a red and blue light appears (1).
When prompted, enter the pairing code 0000 on your
mobile phone. When paired successfully the red light will
stop ashing and only the blue light continues to ash (2).
To switch off the devide press and hold the play/pause
button for four seconds until a red light appears (3)
The BTM Module can be recharged by plugging the
included usb cable, one side in “USB chg” and the other
in a usb socket
12
3
Phone Control Menu
POWER ON/OFF - Press and hold it for 4 seconds
VOLUME UP - Press to increase the call or ringing volume
VOLUME DOWN - Press to decrease the call or ringing volume
REJECT CALL - Long press when phone rings
ANSWER CALL - Press when phone rings
PAIRING - Press and hold it for 6 seconds
END CALL - Press during call
TRANSFER CALL BACK TO PHONE - Long press during call
RE-DIAL LAST CALL - Double press
/