Pepperl+Fuchs UMB800-18H40-I-2M Operating instructions

Pepperl+Fuchs
Brand
Pepperl+Fuchs
Model
UMB800-18H40-I-2M
Type
Operating instructions

This manual is also suitable for

Pepperl+Fuchs UMB800-18H40-I-2M is a sophisticated ultrasonic sensor that will provide you with accurate and reliable distance measurement data. It features one analog output with two programmable limits, making it ideal for applications that require precise distance control or monitoring.

The sensor is easy to set up and use. Simply mount it in the desired location, connect the power and output cables, and teach it the desired measurement range. The sensor can be configured to output a voltage or current signal that is proportional to the distance to the target object.

The UMB800-18H40-I-2M is a versatile sensor that can be used in a wide variety of applications, including:

Pepperl+Fuchs UMB800-18H40-I-2M is a sophisticated ultrasonic sensor that will provide you with accurate and reliable distance measurement data. It features one analog output with two programmable limits, making it ideal for applications that require precise distance control or monitoring.

The sensor is easy to set up and use. Simply mount it in the desired location, connect the power and output cables, and teach it the desired measurement range. The sensor can be configured to output a voltage or current signal that is proportional to the distance to the target object.

The UMB800-18H40-I-2M is a versatile sensor that can be used in a wide variety of applications, including:

www.pepperl-fuchs.com
Subject to modication •  Pepperl+Fuchs
EDM 45-5635 • Release 2020-12
Inbetriebnahmeanleitung für Ultraschallsensor-Serie UMB*-18H* mit 1 Analogausgang
Commissioning instruction for ultrasonic sensor series UMB*-18H* with 1 analog output
Beschreibung der Sensorfunktion
Produktinformationen
Weitere Informationen zum Produkt wie Technische Daten, Ansprechkurven, Maßzeichnungen etc. nden Sie auf der zugehörigen Produktseite
des Sensors auf www.pepperl-fuchs.de.
Montagehinweise
Halten Sie den minimal zulässigen Biegeradius von 70 mm ein, wenn Sie das Anschlusskabel verlegen!
Für einen zuverlässigen Betrieb müssen Sie die dem Sensor beiliegende Montagehalterung verwenden!
Einstellmöglichkeiten
Der Sensor ist mit 1 Analogausgang mit 2 programmierbaren Grenzen ausgestattet. Die Programmierung der Grenzen und des Ausgangsmodus
erfolgt über den Lerneingang des Sensors.
BU
BN
WH
BK
L+
Lerneingang
Analogausgang
L-
Description of sensor function
Product information
Further information of the product such as technical data, response curves, dimensional drawings etc. you will nd on the respective product
page for the sensor at www.pepperl-fuchs.com.
Mounting instructions
Comply with the minimum permissible bending radius of 70 mm, if you install the connecting cable!
The mounting accessories included with the sensor must be used in order to ensure reliable operation!
Adjustment possibilities
The sensor is equipped with 1 analog output with 2 programmable limits. The programming of the limits and of the output mode is done using the
teach-in input.
ÈŽȷÃÿĽʾ»»Ì·ÂË·Ê¿ÅÄ¿ÿÊÉ
¿É¿Ä½È·ÃÆ
ʸ̐ʹƓ
·Â¿ĽÈ·ÃÆ
ʹ̐ʸƓ
ŸÀ»¹ÊȷĽ»
ʸ ʹ
ʹ ʸ
Note
The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply voltage L- or L+ to
the teach-in input. The supply voltage must be applied to the teach-in input for at least 1 s. The evaluation limit A1 is taught with L-, A2 with L+.
Two dierent output modes can be set:
• Analog value increases with rising distance to object (rising ramp)
• Analog value falls with rising distance to object (falling ramp)
Teach-in rising ramp (A2 > A1)
1. Position the target object at the near evaluation limit.
2. Connect the teach-in input for > 1s with L- for the near limit A1.
3. Disconnect the teach-in input.
4. Position the target object at the far evaluation limit.
5. Connect the teach-in input for > 1s with L+ for the far limit A2.
6. Disconnect the teach-in input.
Teach-in falling ramp (A1 > A2)
1. Position the target object at the near evaluation limit.
2. Connect the teach-in input for > 1s with L+ for the near limit A2.
3. Disconnect the teach-in input.
4. Position the target object at the far evaluation limit.
5. Connect the teach-in input for > 1s with L- for the far limit A1.
6. Disconnect the teach-in input.
Hinweis
Der Ultraschallsensor verfügt über einen Analogausgang mit zwei einlernbaren Auswertegrenzen. Diese werden durch Anlegen der Versor-
gungsspannung L- bzw. L+ an den Lerneingang eingestellt. Die Versorgungsspannung muss mindestens 1 s am Lerneingang anliegen. Mit L-
wird die Auswertegrenze A1 und mit L+ die Auswertegrenze A2 eingelernt.
Zwei verschiedene Ausgangsmodi sind einstellbar:
• Analogwert steigt mit zunehmendem Objektabstand (steigende Rampe)
• Analogwert sinkt mit zunehmendem Objektabstand (fallende Rampe)
Einlernen der steigenden Rampe (A2 > A1)
1. Positionieren Sie das Zielobjekt an der nahen Auswertegrenze .
2. Verbinden Sie den Lerneingang für > 1 s mit L- für die nahe Grenze A1.
3. Trennen Sie den Lerneingang ab.
4. Positionieren Sie das Zielobjekt an der ferne Auswertegrenze .
5. Verbinden Sie den Lerneingang für > 1 s mit L+ für die ferne Grenze A2.
6. Trennen Sie den Lerneingang ab.
Einlernen der fallenden Rampe (A1 > A2)
1. Positionieren Sie das Zielobjekt an der nahen Auswertegrenze .
2. Verbinden Sie den Lerneingang für > 1 s mit L+ für die nahe Grenze A2.
3. Trennen Sie den Lerneingang ab.
4. Positionieren Sie das Zielobjekt an der fernen Auswertegrenze .
5. Verbinden Sie den Lerneingang für > 1 s mit L- für die ferne Grenze A1.
6. Trennen Sie den Lerneingang ab.
ÈŽȷÃÿ»ÈËĽº»ÈËÉÍ»ÈÊ»½È»ÄлÄ
Ê»¿½»Äº»·ÃÆ»
ʸ̐ʹƓ
·Â»ĺ»·ÃÆ»
ʹ̐ʸƓ
¸À»ÁÊ·¸Éʷĺ
ʸ ʹ
ʹ ʸ
BU
BN
WH
BK
L+
Te ach input
Analogue output
L-
  • Page 1 1

Pepperl+Fuchs UMB800-18H40-I-2M Operating instructions

Pepperl+Fuchs
Brand
Pepperl+Fuchs
Model
UMB800-18H40-I-2M
Type
Operating instructions
This manual is also suitable for

Pepperl+Fuchs UMB800-18H40-I-2M is a sophisticated ultrasonic sensor that will provide you with accurate and reliable distance measurement data. It features one analog output with two programmable limits, making it ideal for applications that require precise distance control or monitoring.

The sensor is easy to set up and use. Simply mount it in the desired location, connect the power and output cables, and teach it the desired measurement range. The sensor can be configured to output a voltage or current signal that is proportional to the distance to the target object.

The UMB800-18H40-I-2M is a versatile sensor that can be used in a wide variety of applications, including:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents