Seiki SC-600AU8FL User manual

Brand: Seiki

Model: SC-600AU8FL

Type: User manual

This manual is also suitable for

SC-600AU8FLG

Seiki SC-600AU8FLG is a 6KG Front Load Washing Machine designed to make your laundry day easier. With its user-friendly control panel and energy-efficient features, this washing machine offers a convenient and eco-conscious solution for your laundry needs. The SC-600AU8FLG comes equipped with a variety of programs tailored to different fabric types and wash requirements, ensuring optimal cleaning for your clothes. Its spacious 6kg capacity allows you to wash larger loads, saving you time and effort.

INSTRUCTION

MANUAL

Please read this manual carefully before using, and keep it for future reference.

6KG

FRONT LOAD

WASHING MACHINE

SC-600AU8FLG

General Safety 4

Product Overview 8

Getting Started 10

Levelling the appliance 11

Connecting the water inlet hose 12

Connecting the Drain Hose 13

Instructions 14

Operations 18

Cleaning and Maintenance 20

FAQs 24

Speciﬁcations 26

Customer Helpline 28

CONTENTS

Read this manual thoroughly before you start using the Front Load Washing Machine.

The safety precautions instructions reduces the risk of ﬁre, electric shock and injury when

correctly complied to.

Please follow all instructions and take notice of all warnings.

Pay close attention to messages that follow this safety alert symbol or the words

DANGER, WARNING or CAUTION. These words will be used to alert you of potential

hazards that and injure you and others. Following these instruction will tell you how to

reduce the chance of injury and the possible dangers if

instructions aren’t followed.

This symbol indicates when there is a serious risk of

injury if you do not pay attention to the warnings.

WARNING

CAUTION This symbol indicates when to be careful to

avoid a serious risk of injury to oneself or

damage to property.

IMPORTANT INFORMATION

GENERAL SAFETY

ELECTRICAL SAFETY

• Voltage: Plug the appliance to a 220-240V, 50Hz, properly earthed power

outlet, it must be in good working order.

• Power connection: Do not use an adaptor or an extension cord.

Plug the power plug directly into a separate power point that cannot be

accidentally turned o, and that is easily accessible so you can switch it o

if needed.

• Power cord: Do not kink or damage the power supply cord. Make sure it is

behind the appliance so no one can step on or place anything on the power

supply cord or against it. A damaged power plug may overheat and cause a ﬁre.

• Damaged cord: Do not use a cord that shows cracks or damage. Any damage

to the cord may cause a short circuit, ﬁre and/or electric shock.

Contact our support centre on 1300 296 699 for advice

• Disconnection: Never pull the power cord to unplug appliance. Grip the plug and

pull straight out from the power point.

• Electrical work: If the installation of this appliance requires any electrical work,

make sure it is carried out by an electrician.

To reduce risk of ﬁre, electric shock or injury, always follow these basic precautions and

accident prevention measures when using this appliance, including the below:

NOTE: This appliance should be installed by an authorised technician else warranty

will be void.

INSTALLATION

• The product is heavy, be careful when moving it. To avoid back or other

injury, have 2 people lift or mechanical aid when installing.

• When unboxing, thoroughly inspect the appliance carefully for any

damage. If there is any damage, do not install the appliance. Contact our

support centre on 1300 296 699 for advice.

• While installing the appliance make sure that the power cord is not bent

or ﬂattened.

• Make sure to remove all packaging materials such as foams and tapes

before installing the appliance.

• Make sure if the machine is to be placed on carpet that the ventilation openings

in the base are not obstructed

• Install the washing machine on a ﬂat level and stable ground.

GENERAL SAFETY INSTRUCTIONS (Cont.)

USAGE CONDITIONS AND RESTRICTIONS

• Supervision over children is to ensure that they do not play with the

appliance. Never allow them to use, play with or crawl inside the appliance.

Cleaning and maintenance must not be done by children.

• This appliance is not to be used by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they are being supervised or been given instructions on how to use of the

appliance in a safe way and understand the hazards with using this

appliance incorrectly.

• Only for indoor domestic use only. It is not to be used for industrial or

commercial use.

• Do not use this product for anything other than its intended purpose, and only

use it as described in this manual. Do not attempt to alter or modify

this appliance.

• In the process of a hot wash, the door window can become hot. Make sure not to

touch it or that no children or pets come into contact with the door window.

• Ensure that emptying all pockets of every item to make sure that there is no

hard, sharp objects such as coins, safety pins, bra wires, nails or screws can cause

damage to the appliance and has a chance to block the pump.

• Damage or malfunction caused from foreign objects is not covered by your

warranty to the appliance.

• Do not operate this appliance outdoors.

• Incorrect use can result in property damage, injury or death. We assume no

liability for misuse of the appliance or noncompliance with these instructions.

• Maximum load of dry clothes is 6kg

GENERAL SAFETY INSTRUCTIONS (Cont.)

CLEANING AND MAINTENANCE

• Before cleaning or maintenance, always unplug the appliance from the power

socket. Make sure you pull by the plug, not the cord as this can damage the

power cord and cause a hazard.

• Only the ﬁlter requires regular cleaning, everything else is non user-serviceable

parts. Do not try to repair, disassemble or modify the appliance.

• Check and clean the lint ﬁlter on a regular basis

• Service: Never try to repair, modify or replace any part of the appliance, unless

this manual says you can do so. All other servicing is to be done by a qualiﬁed

technician, or contact our support centre on 1300 296 699 for advice.

PRODUCT OVERVIEW

PRODUCT OVERVIEW (Cont.)

CONTROL PANEL

1. PROGRAMS

2. LED SCREEN DISPLAY

3. ON/OFF BUTTON

4. DELAY BUTTON

5. SPEED BUTTON

6. TEMPERATURE BUTTON

7. START/PAUSE BUTTON

Before installing your appliance, read all safety instructions in this manual,

especially the sections on electrical safety and installation.

GETTING STARTED

UNPACKING

• When unpacking the appliance, be sure to keep all the packaging materials until

you have made sure your new appliance is undamaged and in good working

order. Plastic can be a suffocation hazard for babies and young children,

make sure the materials are out of their reach.

TRANSPORTATION

• CAUTION: VERY HEAVY! Be sure to team lift the appliance with someone or

mechanical aid is required when moving the appliance. Keep the appliance

upright as possible when moving the appliance.

REMOVE TRANSPORT BOLTS

• IMPORTANT! Make sure before you install the appliance, you must remove the transit

bolts from the back of the appliance and cover the holes with the hole

covers provided. A spanner is required to remove the bolts.

NOTE: Keep the transit bolts for future needs if you are going to move the

appliance again to another location. The bolts hold the drum in place during

transportation but MUST be removed before use so the drum can move during a wash.

Leaving the bolts in can result in strong shock, noise and malfunction.

GETTING STARTED (Cont.)

LEVELLING THE APPLIANCE

IMPORTANT! Make sure to level the appliance carefully with a spirit level to ensure the

most accurate levelling of the appliance. This is a must if your floor in

unbalanced to level the washing machine.

• Make sure to position the appliance on a level and stable ground. If the

floor is uneven you can adjust the feet by twisting foot then with a spanner

you twist the lock nut to the top to lock it in place.

• By placing a spirit level ontop of the appliance you can check correctly to

aid you in adjusting the feet levelling nuts to adjust the appliance to be

completely level.

INSTALLATION AREA

IMPORTANT! When installing the appliance the spacing on the side and behind the

appliance must not be less the 20mm to allow proper ventillation.

Note: Make sure to avoid direct sunlight onto the appliance.

GETTING STARTED (Cont.)

CONNECTING THE WATER INLET HOSE

IMPORTANT! To prevent leakage or water damage please follow the below

instructions. Do not kink, crush, modify or sever the water inlet hose.

Minimum Inlet Water Pressure: 0.05MPa/Maximum Inlet Water Pressure: 1MPa

Be sure to only use new hose sets when connecting the washing machine. Do not re-use

old hoses.

• Connect the inlet pipe as indicated, there are two ways of connecting

the inlet pipe.

1. Connection between the Tap and inlet hose.

2. Connection between the screw tap and inlet hose.

Connect the other end of the inlet pipe to the inlet valve on the back of the

appliance and fasten the pipe tightly clockwise.

GETTING STARTED (Cont.)

CONNECTING THE DRAIN HOSE

Do not kink or protract the drain hose. Position the drain hose correctly otherwise dam-

age will result in water leakage.

There are two ways to place the end of drain hose:

1. Put it through the water trough. 2. Connect it to the branch drain pipe.

When installing the drain hose into the laundry sink, make sure it is properly

fitted with rope to hold it in place. If the hose is too long, do not try to push the end

were it comes from the appliance in to shorten length, this can damage it.

WARNING

• Make sure that the hose is not higher then 120cm above the ground, otherwise

appliance will not drain the water well.

• Never lay down the drain hose otherwise water will pour out.

• Make sure the hose has no kinks so it can drain properly.

BEFORE FIRST USE

• Before any first wash make sure everything is installed correctly. Make sure to

do one wash with no items inside to clean out the tube before your first

loaded wash.

After the above steps have been completed, In a few simple steps shown below you can

select the type of wash you want and get started.

INSTRUCTIONS

INSTRUCTIONS (Cont.)

• Make sure that the appliance is in a correct working temperature (0-40˚C).

If the appliance is used under 0˚C the inlet valve and draining system may

be damaged.

• Make sure that all labels are checked on items if they can be washed.

• Use non-foaming or less-foaming detergents which are more suitable for

washing machines to wash correctly.

WARNING

• Never use the washing machine to wash a single item at any given time, if you

need to urgently wash an item, we suggest placing a few clothing items in there.

• Make sure that all labels are checked on items if they can be washed.

• Use non-foaming or less-foaming detergents which are more suitable for

washing machines to wash correctly.

WASH CARE SYMBOLS

When choosing a wash program, check for any labels on your clothes and follow the

instructions. below are some commonly used symbols.

INSTRUCTIONS (Cont.)

DETERGENT DISPENSER

Only use low-subsiding detergents and clothing care preparations that are for use in a

front load washing machine.

INSTRUCTIONS (Cont.)

• Energy test program: Cotton 60˚C, Speed: the highest speed; Other as the default. Half

load for 6.0/5.0lg Machine: 3.0/3.75kg.

• “Cotton ECO 60˚C” is the standard washing programs to which the information in the

label relates, and they are suitable to clean normal soiled cotton laundry and they are the

most efficient programs in terms of energy and water consumption for washing that type

of cotton laundry, the actual water temperature may differ from the declared cycle

temperature.

WASHING PROGRAMS TABLE

INSTRUCTIONS (Cont.)

CLEANING AND MAINTENANCE

WARNING:

• Before starting maintenance, ensure that the appliance is unplugged and

close the tap.

CLEANING THE CABINET

Proper maintenance on the washing machine can

extend its working life.

The surface can be cleaned with diluted

non-abrasive neutral detergents when necessary. If

there is any water overflow, use a wet cloth to wipe

it off immediately. Make sure no sharp items are used

to clean the appliance.

CLEANING THE DOOR SEAL AND GLASS

Wipe the glass and seal after each wash to

remove lint and stains. If lint builds up it can

eventually cause leaks. Remove any coins,

buttons or other objects from the seal (if

any) after each wash.

CLEANING AND MAINTENANCE (Cont.)

CLEANING THE INLET FILTER

Washing the filter in the tap

1 Close the tap

2 Remove the water supply hose from the tap

3 Clean the filter

4 Reconnect the water supply hose

Washing the filter in the washing machine

1 Screw off the inlet pipe from the back of appliance

2 Pull out the filter with long nose pliers and reinstall after being washed

3 Use the brush to clean the filter

4 Reconnect the inlet pipe and turn on the tap

Page is loading ...

Seiki SC-600AU8FL User manual

Brand: Seiki

Model: SC-600AU8FL

Type: User manual

This manual is also suitable for

SC-600AU8FLG

Download PDF

report

Seiki SC-600AU8FL User manual

This manual is also suitable for

Seiki SC-600AU8FL User manual

Related papers

Other documents