LAMOTTE COMPANY | 802 Washington Avenue | Chestertown, Maryland | 21620 USA
800.344.3100 | +1 410.778.3100 (Outside USA) | Fax 410.778.6394 | lamotte.com
©2023 LaMotte Company, All Rights Reserved 62081-02 09.25.2023
SALT WATER pH KIT
Code 2081-02 | Octa-Slide 2, pH 3.0-10.5
QUANTITY CONTENTS CODE
30 mL *Wide Range pH Indicator *2218-G
*Reagent is a potential health
hazard. READ SDS: lamotte.com
Emergency information:
Chem-Tel USA 1-800-255-3924
Int’l, call collect, 813-248-0585
30 mL Cresol Red Indicator 2212-G
4Test Tubes, 2.5-5-10 mL, plastic, w/caps 0106
1Wide Range pH Octa-Slide 2 Bar, 3.0-6.5 2193-01
1Wide Range pH Octa-Slide 2 Bar,
7.0-10.5
2196-01
1Cresol Red Salt Water Octa-Slide 2 Bar,
7.7-8.2
2165-02
1Octa-Slide 2 Viewer 1101
To order individual reagents or test kit components, use the
specified code number.
Warning! This set contains chemicals that may be harmful if misused. Read cautions on individual containers carefully.
Not to be used by children except under adult supervision.
HOW TO USE THE
OCTA-SLIDE 2 VIEWER
PROCEDURE
1.
Insert Wide Range
pH Octa-Slide 2
Bar (2193-01) or
(2196-01) or Cresol
Red Salt Water
Octa-Slide 2 Bar
(2165-02) into the
Octa-Slide 2 Viewer
(1101).
2.
Fill a test tube
(0106) to the
10 mL line with
sample water.
3.
Add 10 drops
of *Wide Range
pH Indicator
(2218) or 8 drops
of Cresol Red
Indicator (2212).
4.
Cap and mix.
5.
Insert test
tube into
Octa-Slide
2 Viewer
(1101).
6.
Hold the Viewer
so that non-
direct light
enters through
the back.
Match sample
color to a color
standard.
Record as pH.
/