Manual # 650817
GRFX-2017
Dakota Digital Universal GRFX Instrument Installation
Your new GRFX-2017 kit includes:
Installation
GRFX Instrument Cluster
Control Box
Main Harness
Universal Sender
Pack
Installation Manuals
1. Use the provided template to mark out the opening needed to fit the GRFX display. Ensure
there is adequate clearance behind the desired mounting location. The display unit needs
approximately two inches of depth behind the dash.
(4x) L-Brackets
and Thumb Nuts
Manual # 650817
2. With the appropriate opening cut, place the GRFX display into the dash and attach the four (4)
L-brackets to the back of the display using the provided thumb nuts.
3. Connect the provided harness from the Display Cable port on the mounted control box location
to the back of the GRFX system.
(4x) L-Brackets
and Thumb Nuts
3a. If you plan to install a backup camera to your system, connect the camera to
the yellow video plug on the back of the GRFX instrument cluster. Reference
the backup camera installation manual to complete the camera installation.
Manual # 650817
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
4. Re-install the cluster into the vehicle and refer to the main manual for wiring instructions
to complete the GRFX installation.
Note: Configuration of themes, colors and gauges are covered in the main manual.
/