Page 1
Model Code: 3386
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3386
Contents
1 Front Cover
-
2 Safety
Instructions
-
3 Assembly
Instructions
-
4 Back Cover
End
Wallpaper Stripper
Page 2
Model Code: 3386
Oypla.com LLP / www.oypla.com
Contents
1 Front Cover
-
2 Safety
Instructions
-
3 Operating
Instructions
-
4 Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
• This product is not a toy, and is only to
be used for its designated purpose.
• Never carry out any alterations or
modifications to this product.
• Ensure the power supply to the socket
into which the appliance is plugged, is in
accordance with the rating label on the
appliance and that the socket is earthed.
• This product is not intended for use by
persons (including children) with
reduced physical, sensory, and mental
capacities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the product by persons responsible for
their safety.
• Never leave the product unattended
whilst it is switched on. If you have to
leave the product, unattended, even for
a short while, always switch it off.
• Only use the handles provided to move
the product when in use as product may
be hot.
• When in use keep hands, face and body
away from the hot steam.
• The product is only intended for
domestic use and only in the manner
described in this instruction manual.
• This product is intended for indoor use
only.
• Do not place the mains lead on or near
any hot surface.
• Do not touch the product if your hands
are moist or wet.
• Do not attempt to unplug the product by
pulling on the power cord.
• Clean only with a damp cloth. Do not use
strong industrial cleaning substances or
abrasive materials as these will damage
the product. Make sure the product is
off, unplugged from the socket and been
left for five minutes to remove the risk of
electrical shock.
• Do not aim hot steam in the direction of
a person or a flammable material/liquid.
• If the product is damaged or has any
defects, please contact
⚠ WHEN IN USE PRODUCT IS VERY HOT.
DO NOT TOUCH. ONLY USE HADNLES
PROVIDED. THIS COULD LEAD TO PERSONAL
INJURY.
⚠ TURN OFF PRODUCT AND UNPLUG AT
THE WALL TO ALLOW PRODUCT TO COOL
BEFORE PACKAGING AWAY/MOVING.
Warnings
⚠ WHEN IN USE PRODUCT IS VERY HOT.
DO NOT AIM HOT STEAM IN THE DIRECTION
OF PEOPLE OR A FLAMABLE
MATERIAL/LIQUID
Page 3
Model Code: 3386
Oypla.com LLP / www.oypla.com
Parts List:
- If you are missing any of the below parts, please contact
- Please be aware that you will be referring to this parts list throughout the
assembly process.
Contents
1 Front Cover
-
2 Safety
Instructions
-
3 Operating
Instructions
-
4 Back Cover
End
Operating Instructions
PARTS LIST:
• 1 x 4.5L Water Tank
• 1 x Steam Pad
• 1 x 3m Hose
• 1 x BS Certified Plug & Power Cord
*Note: When unpacking the wallpaper stripper, you will notice a small black
part attached to where the tank and hose connect. This can simply be
removed, as its purpose is to prevent anything entering the tank during
manufacturing and transit.
How to Use:
1. Attach the steam pad to the 3m hose, ensuring that they are secured together
correctly.
2. Attach the 3m hose to the lid of the 4.5L water tank.
3. Remove the lid from the water tank and fill the water tank to its limit (4.5L).
Once done, ensure that the lid is secured correctly onto the water tank.
4. Place the power cord into the back of the water tank lid, ensuring it is inserted
correctly. After this, plug it into an earthed wall socket.
5. Turning the knob dictates how much steam is allow through, use this to
moderate usage. The stripper has an automatically controlled temperature
system so steam production is kept constant, but avoids overheating.
Page 4
Model Code: 3386
Oypla.com LLP / www.oypla.com
Contents
1 Front Cover
-
2 Safety
Instructions
-
3 Operating
Instructions
-
4 Back Cover
End
-
1
-
2
-
3
-
4
