HERO SPLENDOR+ Owner's manual

PREFACE

Let us make this world a safer, healthier and more environment friendly place.

Thank you for selecting a Hero MotoCorp SPLENDOR+ PROGRAMMED FI. We wish

you many miles of continued riding pleasure in the years ahead.

Your vehicle is conforming to latest (Bharat stage-VI norms) regulation for emission, safety &

noise levels. We are also using non asbestos brake shoes/pads and engine gaskets which are

environment friendly in nature.

This vehicle is fitted with a lighting feature known as “Automatic Headlamp ON”. The feature

is mandated for all 2 Wheelers by Ministry of Road Transport & Highways (Government of

India) vide notification GSR 188 (E) dated 22nd February 2016. This feature helps in

conspicuity for improving rider safety. The headlamp of this vehicle will always be lit ON when

the engine gets ON.

This booklet is your guide to the basic operation and maintenance of your new Hero

MotoCorp SPLENDOR+ PROGRAMMED FI. Please take time to read it carefully. As with

any fine machine, proper care and maintenance are essential for trouble-free operation and

optimum performance.

We, at Hero MotoCorp, are committed to demonstrate excellence in our environment

performance on a continual basis, as an intrinsic element of our corporate philosophy. To

achieve this we commit ourselves to continue product innovations to improve environment

compatibility, comply with all applicable legislation including environment legislation and

strengthen the green supply chain.

Your Authorised Hero MotoCorp dealer will be glad to provide further information or

assistance and is equipped to handle your future service needs.

Hero MotoCorp Ltd RESERVES THE RIGHT TO MAKE CHANGES IN ITS

CONTENTS AT ANY TIME WITHOUT NOTICE AND/OR INCURRING ANY

OBLIGATION, WHATSOEVER. NO ONE IS ALLOWED TO REPRODUCE ANY

PART OF THIS PUBLICATION WITHOUT OBTAINING PRIOR WRITTEN

PERMISSION FROM Hero MotoCorp Ltd.

ALL INFORMATION, ILLUSTRATION, PHOTOGRAPH, DIRECTIONS,

SPECIFICATIONS AND OTHER CONTENTS COVERED IN THIS OWNER'S

MANUAL ARE BASED ON THE LATEST PRODUCT INFORMATION AVAILABLE

AT THE TIME OF ITS PRINTING APPROVAL, AND THE ACCURACY OR

CORRECTNESS OF THE SAME IS NOT UNDERTAKEN OR GUARANTEED.

NOTE

ACCESSORIES SHOWN MAY NOT BE THE PART OF STANDARD FITMENT. IT

IS OUR ENDEAVOUR TO CONSTANTLY IMPROVE OUR PRODUCTS. THIS

COULD LEAD TO CHANGE IN PRODUCT SPECIFICATIONS WITHOUT

NOTICE. Hero MotoCorp Ltd ‘SPLENDOR+ PROGRAMMED FI’ COMPLIES

WITH THE LATEST EMISSION NORMS.

Pg. No.Pg. No.

CONTENTS

Pg. No.

VEHICLE IDENTIFICATION 1

•Instruments & Indicators 13

USB CHARGER 20

VEHICLE SAFETY 8

PARKING/UTILITY BOX 25

CLEANING AND WASHING OF VEHICLE 26

i3s (IDLE STOP START SYSTEM) 16

RIDING/BRAKING 23

ANTI-THEFT TIPS 7

MAINTENANCE 26

SAFE RIDING TIPS 10

TIPS FOR HEALTHY ENVIRONMENT 11

PARTS FUNCTION 12

VEHICLE SPECIFICATION 5

SIDE STAND INDICATOR/SWITCH 18

ACCESSORIES & MODIFICATIONS 7

•Protective apparel 9

•Ignition switch 12

HANDLEBAR SWITCHES CONTROLS 14

VEHICLE VIEWS 2

•Important safety information 8

FEATURES 14

FUEL TANK 19

PRE-RIDE INSPECTION 21

STARTING THE ENGINE 22

TOOL KIT/FIRST AID KIT 25

SAFETY PRECAUTION 27

SPARK PLUG INSPECTION 31

OIL FILTER SCREEN & CENTRIFUGAL FILTER 33

AIR CLEANER 34

ENGINE OIL 32

VALVE CLEARANCE ADJUSTMENT 36

CLUTCH LEVER FREE PLAY 37

THROTTLE OPERATION 38

DRIVE CHAIN SLACKNESS 39

DRIVE CHAIN SLIDER INSPECTION 41

MAINTENANCE SCHEDULE 28

BRAKES 42

SUSPENSION 45

WHEEL 45

ZONAL/REGIONAL/AREA OFFICES

TUBELESS TYRES 48

HERO GENUINE PARTS

WARRANTY

CATALYTIC CONVERTER 54

POLISHING OF VEHICLE 55

ROAD SIGNS 59

NUTS, BOLTS & FASTENERS 51

HEADLAMP FOCUS ADJUSTMENT 54

STOP LAMP SWITCH 53

BATTERY 51

MAIN/SIDE STAND LUBRICATION 47

EVAPORATIVE EMISSION CONTROL SYSTEM 55

FUSE REPLACEMENT 52

BASIC TROUBLESHOOTING 56

1

2. For dealing with legal & insurance departments.

VIN and Engine No. may be required:

1. During registration of the vehicle.

HA11ED#

#######

MBLHAW12#########

VIN: MBLHAW12#########

MBL HAW12 # # # #####

Manufacturer

code Vehicle

Description Model Year Plant

Code Month of

Manufacturing Production

Serial Number

#

Check

Digit

Engine No.: HA11ED########

HA11ED # # # #####

Engine

Description Year of

Manufacturing Assembly Plant Month of

Manufacturing Serial Number

VIN Engine

Variants

Model: SPLENDOR+ PROGRAMMED FI

Electric Start/Drum/Cast Wheel/i3s HA11ED

HAW12

VEHICLE IDENTIFICATION

Engine No.

Location: Stamped on the lower side of the

left crankcase.

Vehicle Identification Number (VIN)

Location: Stamped on the right side of the

steering head tube.

Electric Start/Drum/Cast Wheel HA11EV

HAW11

Electric Start/Drum/Cast Wheel/i3s HA11EY

HAW12

(1) Turn signal indicator

(3) Horn switch

(4) Turn signal lamp switch

(7) Headlamp dimmer switch

(8) Odometer

(2) Side stand indicator

(5) Clutch lever

(6) Rear view mirror

(11) Neutral indicator

(10) i3s indicator

(9) Speedometer

(14) High beam indicator

(12) Programmed FI malfunction indicator

lamp (MIL)

(13) Fuel gauge

(16) Front brake lever

(20) Fuel tank lid

(21) Leg guard

(19) Ignition switch with steering lock

(18) Electric starter switch

(17) Throttle grip

(15) i3s switch

TOP VIEW

3

5

6

17

16

21

18

2

VEHICLE VIEWS

4

1

2

10 11 13

19

*Accessories and features shown may not be part of standard fitment.

8 9 14 15

12

20

7

LEFT SIDE VIEW

6

145

3

11

(11) Rear carrier

(10) Tail/stop lamp

(8) Rear reflex reflector

(7) Saree guard with

women pillion step

(9) Rear turn signal lamp

(2) Side stand switch

(1) Gearshift pedal

(4) Side stand

(3) Main stand

(5) Pillion footrest

(6) Left side cover

(15) Front turn signal lamp

(14) USB charger

( 2)1 ECU (inside)

(13) Throttle body

(16) Side reflex reflector

3

7

10

15

*Accessories and features shown may not be part of standard fitment.

13 12

8

16

14

2

9

(6) Rear brake pedal

(7) Oil level dipstick

(10) Headlamp

(9) Front suspension

(8) Utility box

(14) Rear shock absorber

(11) Front visor

(12) Fuel tank

(13) Seat

(15) Exhaust muffler

RIGHT SIDE VIEW

(1) Pillion footrest

(3) Kick starter pedal

(5) Starter motor

(2) Battery compartment (Inside)

(4) Rider footrest

10

11

23

*Accessories and features shown may not be part of standard fitment.

1

4

5

9

8

9

12

13

15

47

14

SPECIFICATIONSITEM

Dimensions

Overall length 2000 mm

Overall width 720 mm

Overall height 1052 mm

Wheelbase 1236 mm

Saddle height 785 mm

Ground clearance 165 mm

Engine oil 1 litres at disassembly and 0.85 litre at draining

Weight

Capacities

Maximum power 5.9 kW @ 8000 r/min

Maximum torque 0.82 kgf-m (8.05 N-m) @ 6000 r/min

Bore and stroke 50.0x49.5 mm

Displacement 97.2 cc

Engine

Spark plug gap 0.6-0.7 mm

Idle speed 1400 100 r/min± in hot condition

Front suspension Telescopic hydraulic shock absorbers

Valve clearance 0.10 mm

0.10 mm

Intake

Exhaust

Chassis and suspension

Rear suspension Swing arm with 5 step adjustable hydraulic shock

absorbers

5

Compression ratio 9.9:1

VEHICLE SPECIFICATION

Spark plug NGK-CR7HSA, BOSCH-UR4AC,

Federal Mogul-P-RZ9HC

Caster angle 26°

Fuel tank 9 .8 litres

Trail length 80 mm

Kerb weight 112 kg

Side stand indicator LED

Hi beam indicator 12V-1.7W

Alternator 125 W @ 5000 r/min

Neutral indicator 12V-1.7W

Headlamp (High/Low) 12V-35/35W (Halogen Bulb**MFR)

Tail/Stop lamp 12V-5/10W-**MFR

Meter illumination 12V-1.7Wx2

rd

31.238 (26/21)

th

40.958 (23/24)

1.706 (29/17)

nd

2

Electricals

SPECIFICATIONSITEM

Brakes

Internal expanding shoe type, 130 mm

(Integrated braking system)

Front

Rear

st

Gear ratio, 1 3.182 (35/11)

Final reduction 3.143 (44/14)

Primary reduction 3.722 (67/18)

Transmission

Tyre size Front

Rear

80/100-18M/C 47P (Tubeless tyre)

80/100-18M/C 54P (Tubeless tyre)

Turn signal lamp 12V-10Wx4 **MFR

Turn signal indicator 12V-3.0Wx2

6

* MF stands for Maintenance Free

** MFR stands for Multi-Focal Reflector

i3s indicator LED

VEHICLE SPECIFICATION

Programmed-Fi Malfunction indicator lamp (MIL) LED

Fuse 15A,10A (Circuit fuse) & 15A, 10A (Spare fuse)

Fuse box (A)

Fuse box (B) 10A (Circuit fuse) & 10A (Spare fuse)

Position lamp 12V-3W

Battery *MF Battery12V-3Ah/ETZ-4

ACCESSORIES & MODIFICATIONS

Modifying your vehicle or using non-Hero

MotoCorp accessories can make your vehicle

unsafe. Before you consider making any

modifications or adding an accessory, be sure

to read the following information.

operation. Such changes could seriously

impair your vehicle's handling, stability and

braking, making it unsafe to ride. Removing or

modifying your lamps, mufflers, emission

control system or other equipment can also

make your vehicle illegal.

•Be sure the registration information for your

vehicle is accurate and correct.

•Park your vehicle in a locked garage

whenever possible.

•Never park your vehicle in an isolated area.

Park as far as possible in a designated area.

•Enter your name, address and phone

number in this Owner's Manual and keep it

in your vehicle at all times. Many times

stolen vehicles are identified by information

in the Owner's Manuals that are still with

them.

•Always lock the steering and never leave the

key in the ignition switch. This sounds

simple but people do forget.

ANTI-THEFT TIPS

•Use an additional anti-theft device of good

quality.

ADDRESS: _______________________________________

NAME: _____________________________________________

PHONE NO : _____________________________________

_______________________________________________________

Accessories

•Make sure that the accessory does not

obscure any lamps, reduce ground

clearance, limit suspension travel or steering

travel, affect your riding position or interfere

with operating any controls.

We strongly advise you not to remove any

original equipment or modify your vehicle in

any way that would change its design or

•Be sure electrical equipment does not

exceed the 's electrical system vehicle

capacity (page 6). A blown fuse can cause a

loss of lights.

•Do not pull a trailer or sidecar with your

vehicle. This vehicle was not designed for

these attachments, and their use can

seriously impair your vehicle's handling.

Modifications

•Improper accessories or modifications can

cause a crash in which you can be seriously

hurt or killed.

•Follow all instructions in this owner's manual

regarding accessories and modifications.

WARNING

!!

7

There is much that you can do to protect

yourself when you ride. You will find many

helpful recommendations throughout this

manual. Following are a few that we consider

most important.

Take time to learn & practice your

vehicle

Even if you have ridden other vehicles,

practice riding in a safe area to become

familiar with how this vehicle works and

handles, and to become accustomed to the

vehicle's size and weight.

Your vehicle can provide many years of

service and pleasure if you take responsibility

for your own safety and understand the

challenges you can meet on the road.

VEHICLE SAFETY

Make sure that you are physically fit, mentally

focused and free of alcohol and drugs. Check

that you and your pillion are both wearing an

approved vehicle helmet and protective

apparel. Instruct your pillion on holding onto

the grab rail or your waist, leaning with you in

turns, and keeping their feet on the footrest,

even when the vehicle is stopped.

It is a proven fact, helmet significantly reduces

the number and severity of head injuries. So

always wear a helmet and make sure your

pillion rider does the same. We also

recommend that you wear eye protection,

sturdy boots, gloves and other protective gear.

IMPORTANT SAFETY INFORMATION

Always wear a helmet

Before riding your vehicle

Always pay due attention to other vehicles

around you, and do not assume that other

drivers see you. Be prepared to stop quickly or

perform an evasive maneuver.

Keep your vehicle in safe condition

Ride defensively

Ride within your limits

Do not drink and ride

For safe riding, it’s important to inspect your

vehicle before every ride and perform all

recommended maintenance. Never exceed

load limits, and use accessories that have been

recommended by Hero MotoCorp for this

vehicle.

Some drivers do not see vehicles because they

are not looking for them. To make yourself more

visible, wear bright reflective clothing, position

yourself so that others can see you, signal before

turning or changing lanes, and use horn which

will help others to notice you.

Make yourself easily visible

Pushing the limits is another major cause of

vehicle accidents. Never ride beyond your

personal abilities or faster than conditions

demand. Remember that fatigue and

negligence can significantly reduce your ability

to make good judgements and ride safely.

Riding under the influence of alcohol or drugs

is dangerous. Alcohol can reduce your ability

to respond to changing conditions and reduce

the reaction time. Do not drink and ride.

8

Your helmet is your most important piece of

riding gear because it offers the best

protection against head injuries. A helmet

should fit your head comfortably and securely.

A bright coloured helmet can make you more

noticeable in traffic, as can reflective strips.

In addition to a helmet and eye protection, we

also recommend:

Helmets and eye protection

An open-face helmet offers some protection,

but a full-face helmet offers more. Always

wear face shield or goggles to protect your

eyes and help your vision.

Additional riding gear

•Sturdy boots with non-slip soles to help

protect your feet and ankles.

•A two wheeler riding suit or jacket for

comfort as well as protection. Bright

coloured reflective clothing can help make

you more noticeable in traffic. Be sure to

avoid loose clothes that could get caught on

any part of your vehicle.

•Leather gloves to keep your hands warm

and help prevent blisters, cuts, burns, and

bruises.

PROTECTIVE APPAREL

Personal safety is your first priority. If you or

anyone else has been injured, take time to

assess the severity of the injuries and whether

it is safe to continue riding. Call for emergency

assistance if needed. Also follow applicable

laws and regulations if another person or

vehicle is involved in the crash.

If you decide to continue riding, first evaluate

the condition of your vehicle. If the engine is

still running, turn it off. Inspect for fluid leaks,

check the tightness of critical nuts and bolts,

and check the handlebar, brake levers, brakes,

and wheels. Ride slowly and cautiously. Your

vehicle may have suffered damage that is not

immediately apparent. Have your vehicle

thoroughly checked at a qualified service

facility as soon as possible.

If you are involved in a crash

For your safety, we strongly recommend that

you always wear an approved helmet (ISI

marked), eye protection, boots, gloves, long

pants and a long sleeve shirt or jacket

whenever you ride. Take care of loose/

hanging clothes while solo/pillion riding.

Although complete protection is not possible,

wearing proper gear can reduce the chance of

injury when you ride.

Following are suggestions to help you choose

proper riding gear.

•Not wearing a helmet increases the chance of

serious injury or death in a crash.

•Be sure you and your pillion always wear a

helmet, eye protection and other protective

apparel when you ride.

WARNING

!!

9

•During night time, dip headlamps of your

vehicle for oncoming traffic, or when

following another vehicle.

•To stop the vehicle (in IBS), press the rear

brake pedal for the application of front and

rear brakes simultaneously. However, for

more effective braking, use both brakes

simultaneously, keeping throttle in the

closed position.

•To make yourself more visible, wear bright

reflective clothing that fits well.

Do's:

•Respect road signs and obey traffic rules for

your own safety and that of others on the

road (page 59).

•While riding, sit in a comfortable position

with your legs close to fuel tank.

•Always wear a helmet (ISI marked) with

chin strap securely fastened and insist on a

helmet for your pillion rider.

•Ride defensively and at a steady speed

(between 40-50 km/hr).

•Always conduct simple pre-ride inspection

(page 21).

•Before riding make sure in which mode you

are riding whether with i3s switch “ON’ or

“OFF”.

•Get your vehicle serviced regularly by the

Authorised Hero MotoCorp workshop.

•Tightly wrap loose/hanging clothes & avoid

entangling with moving parts.

•Give way to others on the road and signal

before you make a turn.

Don't

•Concentrate on the road and avoid talking

to the pillion rider or others on the road.

•Do not cross the continuous white/yellow

line in the center of the road, while

overtaking.

•Avoid sudden acceleration, braking and

turning of your vehicle.

•Never touch any part of the hot exhaust

system like muffler.

•Never use cell phone while riding the

vehicle.

•Never take your hands off the steering

handle while riding.

•Do not move the side stand down while

riding, as engine will stop while vehicle is in

gear (page 18) (Wheel locking leading to

accident, part damage, etc.).

•Never shift gears without disengaging the

clutch and closing the throttle.

•Never ride under the influence of alcohol or

drugs.

•Do not litter on the road.

•Do not attach large or heavy items to the

handlebars, front forks, or fenders.

SAFE RIDING TIPS

10

11

TIPS FOR HEALTHY ENVIRONMENT

The following tips shall ensure a healthy vehicle, healthy environment, and a healthy you.

•Healthy engine: The engine is the lifeline of every vehicle. To keep it healthy, it should be

tuned regularly, which will also help reduce pollution and improve vehicle performance &

fuel efficiency.

•Regular servicing: Hero MotoCorp Get your vehicle serviced at an Authorised

workshop, as per the service schedule, for an optimum performance and keep the emission

level under check.

•Genuine engine oil: Hero 4T Plus SAE 10W 30 SL grade (JASO MA2) engine oil

recommended by and make sure you change it every 6000 km. (with Hero MotoCorp

top up every 3000 kilometres) to keep the engine fit and environment healthy.

•Noise pollution: Noise beyond a certain decibel is pollution. Whether it is from horns or

defective s, excessive noise will cause headaches and discomfort.muffler

•Emission pollution: Get emission of your vehicle checked by Authorised agencies atleast

once every 3 months or as notified by the government from time to time.

•Genuine spares: Hero MotoCorp Always insist on genuine parts as spurious or

incompatible spares and accessories can upset or deteriorate your vehicle’s running

condition.

•Fuel saving & Reduce pollution: Switch "OFF" the engine while waiting at traffic signal

points to save fuel and reduce pollution, if the waiting period is long.

•BS-VI grade fuel: Always use BS-VI grade fuel to adhere BS-VI norms.

1. Ignition switch

2. Ignition key

3. Steering lock position

3

2

1

12

Ignition switch

PARTS FUNCTION

“LOCK” position

“ON” ( )

position

“OFF”( )

position/

Lock open

The engine can be started, turn signal lamps,

horn, tail/stop lamp can be operated.

Fuel gauge will be functional. Programmed FI

malfunction indicator lamp (MIL) illuminates.

i3s indicator glows for 2 seconds.

Key cannot be removed

Engine cannot be started and no electrical

system will be functional. Key can be removed

Key can be removed

Key removal

Steering can be locked.

FunctionKey position

“LOCK”

“ON” ( )

“OFF”( )

The indicators are in the speedometer panel

above the headlamp. The functions are as

below.

Instruments and Indicators 12

678

13

Speedometer

Fuel gauge

High beam indicator

Side stand indicator

Neutral indicator

Turn signal indicators

Sl. No. Description

2

3

Function

Indicates driving speed.

Odometer Shows accumulated distance travelled.

Gear shifting Maximum operating speed in each gear.

1

7

6

4

8

5Indicates approximate fuel quantity (page 14).

“ ”Light glows when headlamp is in Hi beam.

Light glows when the vehicle is parked on the side stand.

position. Light glows when vehicle is in neutral

Flashes when turn signal switch is operated.

9

i3s indicator Indicator glows for 2 seconds and turns “OFF”

indicating that i3s system is functional.

10

lamp (MIL)

Programmed-FI

malfunction indicator

When the ignition switch is turned “ON” the programmed

FI malfunction indicator lamp (MIL) glows continuously

and then should go “OFF” once the engine is started. It

indicates that programmed FI system is OK. If it glows

continuously there is an abnormality in the programmed

FI system, it is recommended to reduce the speed and

drive to the Authorised Hero MotoCorp workshop for

check-up.

10

4

9

35

14

(a) Fuel gauge

When fuel gauge needle (1) enters the red

band (2), it indicates the fuel quantity is low

and the fuel tank should be refilled as soon as

possible.

(1) Fuel gauge needle (2) Red band

2

1

Please ensure the vehicle is not used with fuel

gauge needle at red band continuously. It will

not only result in the vehicle running out of

fuel, it may also cause serious damage to the

fuel pump. Please ensure fuel is filled up as

soon as the fuel gauge needle reaches red

band.

CAUTION

!!

Steering lock with ignition switch, turn the

ignition key (1) to "OFF" ( ) position & turn

the handle bar towards left or right & push the

key downwards & turn towards "LOCK”

position. After locking take out the key.

Steering lock

FEATURES

(1) Ignition key

HANDLEBAR SWITCHES CONTROL

1. Dimmer switch

Left handlebar controls

Select “ ” for high beam and “ ” for

low beam.

1

NOTE

To check the fuel level indication, the vehicle

should be on levelled surface and in stationary

condition.

2. Turn signal lamp switch ( )

Shift the turn signal lamp switch (2) sideways

for right/left indications and leave it to come

back to its normal position on its own.

IMPORTANT: To switch “OFF” the turn

signal after completing the turn, gently push

inside.

2

3

15

(1) Electric starter switch (2) i3s switch

1

3. Horn switch ( )

Press the horn switch (3) to operate the horn.

(1) Dimmer switch

(2) Turn signal lamp switch (3) Horn switch

Right handlebar controls

1. Electric starter switch ( )

Ensure starter switch (1) is operated when the

vehicle is in neutral gear. If the vehicle is

engaged in gear press the clutch lever before

operating the starter switch. Release starter

switch after the engine has started.

•If electric starter switch is pressed

continuously and engine does not start,

cranking of engine will stop after 5 secs.

After that rider again needs to press the

electric starter switch.

•If engine started, cranking of the engine will

stop after r/min reaches more than 1000.

CAUTION

!!

There is an i3s switch provided to enable (2)

the rider for turning i3s mode “ON” or “OFF”

based on the traffic conditions.

2. i3s switch

2

(4) Clutch switch

4

4. Clutch switch

There is a clutch switch (4) provided for the

safety of the rider. The vehicle cannot be

started by electric starter switch until the clutch

lever is operated when the vehicle is engaged

in gear.

1

16

(2) i3s switch

2

i3s (IDLE STOP START SYSTEM)

Starting & Warm up the engine:

The i3s indicator (1) will glow on the

speedometer console for 2 seconds and turns

“OFF”. For the activation of i3s system, start

the engine and let it idle till the engine gets

warmed up or temperature reaches more than

75°C.

Turn the ignition key to “ON” ( ) position.

(1) i3s indicator

1

In this condition, the engine can be restarted

either with clutch lever, kick or electric start.

Driving with i3s switch in “ON” position:

While driving, if the engine is kept idling (while

waiting in a traf c signal), the engine will cut fi

off in 5 sec . (The vehicle should be inonds

stand still condition, with gear position neutral

at th n clutch less a 2000 r/min with

lever/throttle is in released position and

engine is warmed up The i3s indicator will ).

be continuously blinking in the speedometer

indicating that vehicle stopped in i3s

condition. By pressing the clutch lever, the

engine will start again and gear can be

engaged to move the vehicle.

After the first stop start, every subsequent stop

will be in 5 seconds.

Initial activation of the i3s system:

Keep the i3s switch (2) to “ON” position.

Turn the ignition key to “ON” position. The

i3s indicator on the speedometer console will

glow for 2 seconds and turn “OFF”. Start the

vehicle (in neutral and clutch lever released

condition) with less than 2000 r/min and let

it idle till engine temperature reaches more

than 75°C. The engine will cut-off in 30

seconds.

17

Driving with i3s switch in “OFF” position:

will be in normal operating conditions as other

vehicles and no special functions will be

performed.

While driving in a traffic jam/or very dense

traffic where the vehicle has to encounter a

stop and go situation, the i3s switch can be

changed to “OFF” position. Once this is done,

the i3s system will not work and the vehicle

NOTE

•If all the required i3s conditions are met,

i3s indicator will glow for 5 secs before the

engine cuts-off.

•If engine is stopped by any means other than

i3s function, i3s indicator will not glow/blink

in the speedometer. In this condition, vehicle

will not start by pressing the clutch lever.

Vehicle can be started by using kick or electric

start.

•If vehicle stops in i3s condition and kept idle

for more than 500 secs (ignition switch in

“ON” position) i3s function will be

deactivated and cannot be started by

pressing the clutch lever, rider can only

start the vehicle with electric or kick start.

•The i3s system will not function if rider puts

the i3s switch to ”OFF” position.

•If the low battery voltage is detected while

the ignition key is in “ON” position or engine

is in running condition, the i3s function will

be deactivated or may not function properly

until the rider turns the ignition switch to

"OFF" ( ) position and then back to "ON"

( ) position.

•If the battery is in healthy condition and the

i3s system does not work properly, it is

recommended to visit your Authorised Hero

MotoCorp workshop.

•i3s system will not function properly if the

vehicle battery is low/dead or driven without

battery.

• i3s function If the vehicle has fallen down,

may not work properly. B efore restarting the

engine you must turn the ignition switch to

"OFF" position and then back to "ON" ( )

( ) position.

•If the battery voltage is low and engine r/min

is less than 2000, there will be 3 continuos

blinks after every 6 secs.

•If the vehicle is driven without battery or with

the dead battery and the engine r/min is less

than 2000 . The i3s indicator on the

speedometer will continuouslyblink at every

1.5 secs.

•If vehicle identifies any problem in electronic

control unit (ECU), then i3s system will not

work.

NOTE

Page is loading ...

HERO SPLENDOR+ Owner's manual

HERO SPLENDOR+ Owner's manual

Related papers

Other documents