Razer Audio Mixer Operating instructions

https://youtu.be/tam-AgWxRG4

This video is a step-by-step process on how to set up the Razer Audio Mixer with OBS or XSplit.

Before we proceed, ensure you have already installed OBS or XSplit on your system.

Let’s get started.

For OBS setup:

Run OBS.

Click on the plus “+” icon under “Sources”.

Select “Audio Input Capture”. You can either create a new or use an existing audio input capture.

Double click on the “Audio Input Capture” that you created.

Depending on what you plugged in or the mapping on the mixer, select either of the following:

Line (Razer Audio Mixer)

SPDIF Interface (Razer Audio Mixer)

Microphone (Razer Audio Mixer)

Click “OK”.

Now we add “Audio Output Capture”.

Click on the plus “+” icon under “Sources”.

Select “Audio Output Capture”. You can either create a new or use an existing audio output capture.

Double click on the “Audio Output Capture” that you created.

Select either “Headphones (Razer Audio Mixer)” or “Line (Razer Audio Mixer)”.

Click “OK” to complete the setup.

For XSplit setup:

Run XSplit.

Click on “Tools” then select “Settings”.

Go to the “Audio” tab.

Click on “System Sound”.

Select either “Headphones (Razer Mixer)” or “Line (Razer Mixer)”.

As for the microphone, select either of the following:

Line (Razer Mixer)

SPDIF Interface (Razer Audio Mixer)

Microphone (Razer Mixer)

Depending on what you plugged in or the mapping on the mixer.

Click “OK” to complete the setup.

There you have it. You have successfully set up your Razer Audio Mixer with OBS or XSplit.

Download PDF