POPPIN’
PORTABLE BLUETOOTH® SPEAKER
QUICK START GUIDE
Accessories
MICRO USB
CABLE
Button functions
PLAY/PAUSE
VOLUME UP
VOLUME DOWN
TRACK FORWARD
TRACK BACKWARD ANSWER/HANG UP
CALL
AUX IN:
INPUT FOR NON-BLUETOOTH
DEVICE CONNECTION
ON/OFF: POWER
DC 5V: CHARGING INPUT
Bluetooth Pairing
1. Turn switch ON
2. Red and blue blinking lights indicate JLab Poppin'
is in pairing mode.
3. Look for JLab Pop in your Bluetooth settings on
your device and connect.
4. Slow blue blinking light indicates speaker is
connected with your device.
5. The speaker will automatically connect to the last
device it was paired to when turned on. To
connect another device, disconnect the device in
your settings and follow steps 1-4 with new device.
Charging
1. Plug in Micro USB and connect USB to a computer or AC power source.
2. Solid red light indicates charging mode.
3. Red light will turn off when fully charged.
JLABAUDIO.COM
/