Victron energy BMV 501 Owner's manual

Category
Fire protection
Type
Owner's manual

This manual is also suitable for

Victron energy BMV 501 - battery monitor: The monitor allows you to keep track of important battery data, such as battery voltage, current flow, power consumption, and state of charge. It can be used to monitor a wide range of battery types, including lead-acid, AGM, gel, and lithium-ion batteries.

The BMV-501 is easy to install and use. It comes with a detailed installation guide and all the necessary hardware, including a 500A/50mV current shunt, two inline fuse holders, and crimp terminals. Once installed, the BMV-501 can be connected to a computer or smartphone via Bluetooth or a USB cable. This allows you to view real-time data on your device and to download historical data for analysis.

Victron energy BMV 501 - battery monitor: The monitor allows you to keep track of important battery data, such as battery voltage, current flow, power consumption, and state of charge. It can be used to monitor a wide range of battery types, including lead-acid, AGM, gel, and lithium-ion batteries.

The BMV-501 is easy to install and use. It comes with a detailed installation guide and all the necessary hardware, including a 500A/50mV current shunt, two inline fuse holders, and crimp terminals. Once installed, the BMV-501 can be connected to a computer or smartphone via Bluetooth or a USB cable. This allows you to view real-time data on your device and to download historical data for analysis.

INSTALLATION GUIDE
Figure 2
A1 A2 I+ I- Vs - +
battery
system
12V or 24V
Battery positive
(to load e.g.
charger/inverter)
battery negative
(system ground)
battery side
load side
Figure 1
A1 A2 I+ I- Vs - +
+-
ISM010029000-GB-REV02
GB
  • Page 1 1

Victron energy BMV 501 Owner's manual

Category
Fire protection
Type
Owner's manual
This manual is also suitable for

Victron energy BMV 501 - battery monitor: The monitor allows you to keep track of important battery data, such as battery voltage, current flow, power consumption, and state of charge. It can be used to monitor a wide range of battery types, including lead-acid, AGM, gel, and lithium-ion batteries.

The BMV-501 is easy to install and use. It comes with a detailed installation guide and all the necessary hardware, including a 500A/50mV current shunt, two inline fuse holders, and crimp terminals. Once installed, the BMV-501 can be connected to a computer or smartphone via Bluetooth or a USB cable. This allows you to view real-time data on your device and to download historical data for analysis.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI