Quick Start Guide
TRANSFER IMAGES
a. Install the software
1 Insert the OLYMPUS Master
CD-ROM.
2 Windows: Click the
“OLYMPUS
Master“ button.
Macintosh: Double-click the
“Installer“ icon.
3 Simply follow the on-screen instructions.
Remember to register your camera when you install OLYMPUS
Master or visit:
www.olympusamerica.com/prodreg
b. Connect the camera to the computer
c. Transfer images to the computer
1 Connect the camera and computer using the USB cable (included).
The monitor will turn on automatically.
2 Select [PC] on the monitor, and press o.
Your PC will now recognize your camera as a
removable storage drive.
USB cable
1
2
OK
[IN]
SET
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT
1 With the camera now connected,
open OLYMPUS Master.
The [Transfer Images] window is
displayed.
2 Select the images you want to
transfer, and click the [Transfer
Images] button.
[Transfer Images] window
[Transfer Images] button
b. Click the “From Camera” icon.
a. Click the “Transfer Images” icon
on the OLYMPUS Master main
menu.
If the [Transfer Images] window is not
displayed automatically:
REVIEW OR ERASE A PICTURE
a.Select the playback mode b. Take a closer look
Zoom Button
1 Press the q button.
The last picture taken will be displayed.
Press T or W to zoom in
or out.
Press o to return to
the original size.
Press the K/h/s button to
return to the shooting mode.
Press 12 or 43 to
scroll around.
q Button
Prev. Picture
Next Picture
c. To erase a picture
OK
SET
MENU
BACK
YES
NO
E
RA
S
E
[
IN
]
[]
[]
1 Display the picture you
want to erase.
Select the single-frame
playback. A single
image cannot be erased
while the close-up
playback/index
playback is operated.
2 Press the 2Y/S
button.
3 Select [YES], and press
o.
The picture is
permanently erased.
2Y/S Button
GET STARTED
a. Attach the strap
Pull the strap tight so that it does
not come loose.
1
Strap
b. Insert the battery
1 Slide
2 Lift
3 Insert
Battery
lock knob
c. Set the date and time
1 Press o button to turn the camera on.
2 Press 1 or 2 to set [Y] and then press 3 to
go to the next step.
3 Repeat the operations above to set [M], [D],
[TIME] and the date formats.
4 Press o.
o Button
123 Button
o Button
MENU
CANCEL
X
Y/M/D
Y / M / D
Y
Y
M D
D
TIME
T I M E
----.--.-- --:--
----.--.-- --:--
Date formats (Y-M-D, M-D-Y, D-M-Y)
BEFORE YOU BEGIN
Gather these items (box contents)
Digital Camera Strap LI-42B Lithium Ion Battery
USB Cable AV Cable
OLYMPUS Master
Software CD-ROM
Items not shown: Advanced Manual (CD-ROM), Basic Manual, warranty card.
Contents may vary depending on purchase location.
LI-40C Battery Charger
Charge the battery (recommended*)
2
1
AC Wall Outlet
Power Cable
*Battery comes partially charged.
Red light on: Charging
Light off: Charging complete
(Charging time: Approx. 300 minutes)
Charging Indicator
LI-42B Lithium Ion
Battery
LI-40C Battery
Charger
3
Start Here
CAMERA DIAGRAM
Self-Timer Lamp
Shutter Button o Button
Flash
Lens
Zoom Button
Speaker
Arrow Pad (1243)
o Button (OK/FUNC)
Strap Eyelet
Battery Compartment/Card CoverTripod Socket
Connector Cover
Multi-Connector
m Button (MENU)
Monitor
Microphone
/< Button
q Button
K/h/s Button
For more information, please refer to the Basic & Advanced
Manuals or visit: www.olympusamerica.com/support
VH782601
Printed in China © 2006
TAKE A PICTURE
a. Zoom
Zoom Out: Zoom In:
44
HQ
HQ
3072
3072
×
2304
2304
44
3072
3072
×
2304
2304
HQ
HQ
c. Take the pictureb. Focus
1 Press the shutter
button completely to
take the picture.
(Pressed Completely)
Shutter Button
1 Using the monitor, place the AF target
mark over your subject.
2 Press and hold the shutter button halfway
to lock the focus.
The green lamp indicates the focus is locked.
44
HQ
HQ
3072
3072
×
2304
2304
Green Lamp
AF Target Mark
(Pressed Halfway)
Shutter Button
Pictures are recorded in
the internal memory.
Pictures can also be
recorded to an optional
xD-Picture Card (It is
called just “card” in the
attached instruction
manual.)
d4338_qsg_e_7.fm Page 1 Wednesday, August 23, 2006 2:44 PM
/
