Compaq Compaq Evo Notebook n620c Quick start guide

Category
Notebook accessories
Type
Quick start guide

This manual is also suitable for

b
Getting Started
Compaq Evo Notebook N620c Series
Document Part Number: 316625-001
January 2003
This guide explains how to set up your hardware and software,
identify the exterior components of the notebook, find and install
the latest versions of Compaq software, and find additional
information and support.
316625-001.book Page i Thursday, December 12, 2002 9:01 AM
© 2003 Compaq Information Technologies Group, L.P.
Compaq, the Compaq logo, Evo, ROMPaq, and SoftPaq are trademarks of
Compaq Information Technologies Group, L.P. in the U.S. and/or other
countries. Microsoft and Windows are trademarks of Microsoft
Corporation in the U.S. and/or other countries. All other product names
mentioned herein may be trademarks of their respective companies.
Compaq shall not be liable for technical or editorial errors or omissions
contained herein or for the incidental or consequential damages in connection
with the furnishing, performance, or use of this material. The information in this
document is provided “as is” without warranty of any kind, and is subject to
change without notice. The warranties for Compaq products are set forth in the
express limited warranty statements accompanying such products. Nothing
herein should be construed as constituting an additional warranty.
Getting Started
First Edition January 2003
Reference Number: N620c
Document Part Number: 316625-001
316625-001.book Page ii Thursday, December 12, 2002 9:01 AM
Getting Started iii
Contents
1 Hardware and Software Setup
Setting Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Setting Up the Software . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4
Setting Up the Wireless MultiPort. . . . . . . . . . . . . . . 1–5
Installing Optional Applications . . . . . . . . . . . . . . . . 1–6
Notebook Support and Safety Tips . . . . . . . . . . . . . . 1–7
Confirming Hibernation Settings. . . . . . . . . . . . . . . . 1–8
2 A Look at the Notebook
Display Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Pointing Device Components. . . . . . . . . . . . . . . . . . . . . . 2–2
Pointing Stick Model. . . . . . . . . . . . . . . . . . . . . . . . . 2–2
TouchPad Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
Dual Pointing Device Model . . . . . . . . . . . . . . . . . . . 2–4
Top Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5
Speakers and Memory Compartment . . . . . . . . . . . . 2–5
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6
Buttons, Keys and Switches . . . . . . . . . . . . . . . . . . . 2–8
Left Side Components . . . . . . . . . . . . . . . . . . . . . . . . . . 2–10
Right Side Components . . . . . . . . . . . . . . . . . . . . . . . . . 2–11
Front Panel Components . . . . . . . . . . . . . . . . . . . . . . . . 2–12
Rear Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . 2–13
Bottom Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–15
Additional Standard Components . . . . . . . . . . . . . . . . . 2–17
316625-001.book Page iii Thursday, December 12, 2002 9:01 AM
iv Getting Started
Contents
3 How to Get Information, Help and Updates
Using the Documentation Library CD . . . . . . . . . . . . . . . 3–1
Viewing Guides on the CD . . . . . . . . . . . . . . . . . . . . 3–2
Contacting Technical Support . . . . . . . . . . . . . . . . . . . . . 3–3
Updating Compaq Software. . . . . . . . . . . . . . . . . . . . . . . 3–4
Obtaining the Compaq Support Software CD . . . . . . 3–5
Preparing to Update Software . . . . . . . . . . . . . . . . . . 3–5
Downloading Software from the Internet . . . . . . . . . . . . 3–6
Downloading System ROM. . . . . . . . . . . . . . . . . . . . 3–7
Downloading Other SoftPaqs . . . . . . . . . . . . . . . . . . 3–8
Restoring Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–9
Installing a Retail Version of an Operating System. . . . 3–10
Index
316625-001.book Page iv Thursday, December 12, 2002 9:01 AM
Getting Started 1–1
1
Hardware and Software Setup
Setting Up the Hardware
Ä
CAUTION: Setup must begin by connecting the notebook to AC power.
To ensure that the correct drivers load and to prevent file corruption or
damage to the components during initial setup:
Do not set up the notebook while it is docked in an optional
Port Replicator.
Do not remove the battery pack until the notebook has been
connected to external AC power.
Do not run the notebook on battery power. Use external AC
power throughout initial setup.
316625-001.book Page 1 Thursday, December 12, 2002 9:01 AM
1–2 Getting Started
Hardware and Software Setup
1. Place the notebook on a flat surface near an electrical outlet,
then connect the notebook to external AC power.
Plug the AC adapter cable into the DC power connector 1.
Plug the power cord into the AC adapter 2 and into an
electrical outlet 3. (Power cords and outlets vary by country.)
Connecting the notebook to external power
2. Open the notebook by sliding the display release latch to the
right 1 and raising the display 2.
Opening the notebook
316625-001.book Page 2 Thursday, December 12, 2002 9:01 AM
Hardware and Software Setup
Getting Started 1–3
3. Turn on the notebook by sliding and releasing the power
switch 1.
Turning on the notebook
When the notebook is turned on:
The power/standby light 2 turns on.
The battery pack in the battery bay begins to charge and the
battery light 3 turns on. The battery light remains on while
the battery pack is charging and turns off when the battery
pack is fully charged.
316625-001.book Page 3 Thursday, December 12, 2002 9:01 AM
1–4 Getting Started
Hardware and Software Setup
Setting Up the Software
The initial setup prompt is displayed on the screen as soon as the
notebook is connected to external power.
Before responding to the initial setup prompt and proceeding
through the online instructions, read the following setup
information.
Ä
CAUTION: To ensure that the correct drivers load and to prevent file
corruption or damage to the components during initial setup:
Do not unplug the notebook from the electrical outlet.
Do not shut down the notebook.
Do not remove or insert a drive.
After you begin the initial software setup, you must complete
the entire process. Setup time varies depending on notebook
configuration.
If you are prompted to select a language, choose carefully
and keep in mind that the languages you do not choose will
be deleted from the system and cannot be restored during
initial setup.
During the setup process, you must accept the
End User License Agreement to continue.
316625-001.book Page 4 Thursday, December 12, 2002 9:01 AM
Hardware and Software Setup
Getting Started 1–5
Setting Up the Wireless MultiPort
If you ordered your notebook with a wireless MultiPort, your
notebook was shipped with the wireless MultiPort module
preinstalled.
Preinstalled wireless MultiPort Module
The wireless MultiPort is disabled by default. To set up the
wireless MultiPort:
1. Press
Fn+F2 to enable the wireless MultiPort and install
preloaded wireless MultiPort drivers.
Do not attempt to install wireless MultiPort drivers before the
initial software setup is complete.
2. Install preloaded wireless MultiPort software according to the
instructions in “Installing Optional Applications” later in this
chapter.
To configure the wireless MultiPort, contact your network
administrator.
316625-001.book Page 5 Thursday, December 12, 2002 9:01 AM
1–6 Getting Started
Hardware and Software Setup
For instructions on using the wireless MultiPort, refer to the
wireless user documentation included on the Documentation
Library CD shipped with your notebook:
For a Bluetooth wireless device, refer to:
Software Reference Guide (Bluetooth for Windows) or
Software Reference Guide (Bluetooth for XP).
For an 802.11b wireless device, refer to User’s Guide
(Compaq Wireless LAN MultiPort W200).
Installing Optional Applications
You can install third-party applications or preloaded utilities at
any time after initial setup is complete.
To install a third-party application, refer to the documentation
included with the application.
To install a preloaded application, select Start > Software
Setup. A setup wizard loads, and a list of applications is
displayed. Select the application you want to install, and
follow the instructions on the screen.
To view the descriptions and space requirements of preloaded
Compaq utilities without installing them, select Start > Software
Setup, and, after viewing the utility information, select Cancel.
To install preloaded wireless MultiPort software, select
Start > Software Setup. A setup wizard loads, and a list of
applications is displayed. Select the application for the
wireless option you ordered with your notebook:
For Bluetooth wireless, select Bluetooth MultiPort
Module by Compaq.
For 802.11b wireless, select Compaq Wireless LAN
W200 Client Manager.
316625-001.book Page 6 Thursday, December 12, 2002 9:01 AM
Hardware and Software Setup
Getting Started 1–7
Do not attempt to install the preloaded wireless MultiPort
software before the wireless MultiPort has been enabled and the
drivers have been installed.
Notebook Support and Safety Tips
After setting up the software, locate the support and safety
information included with your notebook.
Refer to the Worldwide Telephone Numbers booklet included
with your notebook to contact an authorized dealer, reseller,
or service provider or visit
www.compaq.com to:
Download the latest software and drivers for your
notebook.
Open an online service event with a Compaq support
specialist.
Get information about your notebook, including
reference guides, specifications, white papers, part
numbers, and customer advisories.
316625-001.book Page 7 Thursday, December 12, 2002 9:01 AM
1–8 Getting Started
Hardware and Software Setup
Read suggestions for creating a safe and comfortable work
environment. Ergonomic and safety information about the
notebook is provided on this CD in the Safety & Comfort
Guide.
Å
WARNING: This is a Class B digital device, pursuant to Part 15 of the
FCC Rules. For more Class B information, refer on this CD to
Regulatory
and Safety Notices
. To reduce the risk of personal injury, electric shock,
fire, or damage to the equipment:
Do not disable the power cord grounding plug. It is an important
safety feature.
Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
Do not place anything on power cords or cables. Arrange them
so that no one can accidentally step on or trip over them.
Disconnect power from the equipment by unplugging the power
cord from the electrical outlet.
Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug.
Confirming Hibernation Settings
Hibernation is enabled at the factory, and Compaq recommends
that you do not disable Hibernation. To verify that Hibernation is
enabled:
In Windows 2000 Professional, select Start > Settings >
Control Panel > Power Options icon > Hibernate tab. Make
sure that the Enable Hibernate Support check box is selected.
In Windows XP, select Start > Control Panel > Performance
and Maintenance icon> Power Options icon > Hibernate tab.
Make sure that the Enable Hibernation check box is selected.
316625-001.book Page 8 Thursday, December 12, 2002 9:01 AM
Getting Started 2–1
2
A Look at the Notebook
Display Components
Identifying display components
Display Component Descriptions
1
Display release latch Opens the notebook.
2
MultiPort Supports an optional USB-enabled
wireless device such as a Bluetooth
or 802.11b wireless LAN.
316625-001.book Page 1 Thursday, December 12, 2002 9:01 AM
2–2 Getting Started
A Look at the Notebook
Pointing Device Components
Pointing Stick Model
Identifying pointing stick components
Pointing Stick Component Descriptions
1
EasyPoint IV 3D Pointing
Stick
Moves the pointer and selects or
activates items on the screen.
2
Left and right pointing stick
buttons
Function like the left and right buttons
on an external mouse.
3
Scroll pointing stick button Functions like the scroll button on an
external mouse.
316625-001.book Page 2 Thursday, December 12, 2002 9:01 AM
A Look at the Notebook
Getting Started 2–3
TouchPad Model
Identifying TouchPad components
TouchPad Component Descriptions
1
TouchPad Moves the pointer and selects or
activates items on the screen. Can be
set to perform other mouse functions,
such as scrolling, selecting, and
double-clicking.
2
Left and right TouchPad
buttons
Function like the left and right buttons
on an external mouse.
316625-001.book Page 3 Thursday, December 12, 2002 9:01 AM
2–4 Getting Started
A Look at the Notebook
Dual Pointing Device Model
Identifying dual pointing device components
Dual Pointing Device Component Descriptions
1
Pointing stick Moves the pointer and selects or
activates items on the screen.
2
Left and right pointing stick
buttons
Function like the left and right mouse
buttons on an external mouse.
3
TouchPad Moves the pointer and selects or
activates items on the screen. Can be
set to perform other mouse functions,
such as scrolling, selecting, and
double-clicking.
4
Left and right TouchPad
buttons
Function like the left and right buttons
on an external mouse.
316625-001.book Page 4 Thursday, December 12, 2002 9:01 AM
A Look at the Notebook
Getting Started 2–5
Top Components
Speakers and Memory Compartment
Identifying the speakers and memory compartment
Speakers and Memory Compartment Descriptions
1
Stereo speakers (2) Produce stereo sound.
2
Memory expansion
compartment
Contains 2 memory expansion slots
for optional memory expansion
boards.
316625-001.book Page 5 Thursday, December 12, 2002 9:01 AM
2–6 Getting Started
A Look at the Notebook
Lights
Identifying lights on the edges of the keyboard panel
316625-001.book Page 6 Thursday, December 12, 2002 9:01 AM
A Look at the Notebook
Getting Started 2–7
Lights on the Edges of the Keyboard Panel
1
Caps lock light On: Caps lock is on.
2
Scroll lock light On: Scroll lock is on.
3
Num lock light On: Num lock is on or the embedded
numeric keypad is enabled.
4
Power/Standby light On: Power is turned on.
Blinking: Notebook is in Standby.
The power/standby light also
blinks when a battery pack
that is the only available
power source reaches a
critical low-battery condition
while Hibernation is
disabled.
5
Battery light On: A battery pack is charging.
Blinking: A battery pack that is the
only available power source has
reached a low-battery condition.
6
IDE (Integrated Drive
Electronics) drive light
On: One of the following drives is
being accessed:
Hard drive in the hard drive bay.
Optional hard drive, optical drive,
Zip drive, or SuperDisk drive in
the MultiBay.
7
Diskette drive light On: A standard diskette drive in the
MultiBay or optional external diskette
drive bay is being accessed.
316625-001.book Page 7 Thursday, December 12, 2002 9:01 AM
2–8 Getting Started
A Look at the Notebook
Buttons, Keys and Switches
Identifying buttons, keys, and switches on the keyboard
panel
316625-001.book Page 8 Thursday, December 12, 2002 9:01 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47

Compaq Compaq Evo Notebook n620c Quick start guide

Category
Notebook accessories
Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI