ABWMK-SI
Installation Instructions
Anton/Bauer, Inc.
Shelton, CT U.S.A.
(203) 929-1100
Fax: (203) 929-9935
www.antonbauer.com 7595-0067 Rev D
The following are registered trademarks of Anton/Bauer, Inc.:
ACS,ADM, All Chem, Anton/Bauer, Anton/Bauer Logo and parallelogram design, Automatique,DataTap, Dionic, Gold Mount, HyTRON, Impac, InterActive and design, LifeSaver, Logic Series Logo,
Maxx man logo design, MicroCode, Nexus, PowerStrap, Probe, ProFormer, ProPac, RealTime, SSP, Satellight, Snap-On, Stasis, Titan, TrimPac, Ultrakit, Ultralight, “The power behind the best
cameras capturing the best images in the world.”, “The quality standard of the video industry”, “The worldwide standard”, and
“There should always be choices. It makes it easier to recognize the best.”
The power behind the best cameras capturing the best images in the world.
sm
* Do not use the B-3 or B-4 x 6 metric screws supplied with the Sony Tuner Attachment Kit.
Note: Also included with this kit is a strip of DUAL-LOK. This can be used to attach a
wireless receiver to the plate.
Thumbscrews attach to sheet metal
backplate on the camera Gold
Mount
®
Bracket
*3mm Screws
Qty: 2
Hardware
supplied with the
Sony Wireless
Receiver Kit.
*4mm Screws
Qty: 2
®
The worldwide standard
®
APPROVED COPY
/
