727626112018
PW-F8-W
This washing machine conforms to current safety
requirements. Inappropriate use can, however, lead
to personal injury and damage to property.
To avoid the risk of accidents and damage to the
washing machine, please read this manual carefully
before using it for the first time. They contain
important information on its installation, safety, use
and maintenance.
Keep this manual in a safe place for future reference.
Contents
Safety notices
Parts and features
Installation
The functions of the control panel
How to use washer
Cleanness and maintenance
Troubleshooting guide
Technical parameters
Electric Diagram
PREFACE
16
To avoid the risk of personal injury or damage to the washing
machine, do not install it in place where it is damp and where
it suffers from rainfall.
Do not install the washing machine in place where it suffers
from the sun directly, in which plastic or components will be
damaged. It will be shortened the life of your washing machine.
Do not install the washing machine in place where temperatures
below freezing may occur. Frozen hoses may burst or split. The
reliability of the electronic control unit may be impaired at
temperatures below freezing point.
Do not shoot the washing machine with water when you clean it.
Keep the washing machine away from fire or heat sources.
Before using the washing machine for the first time, check that the transit bolts
at the rear of the machine have been removed. During spinning, transit bolts which is still in place
may result in damage to both the machine and adjacent furniture or appliances.
Turn off the tap if the machine is to be left for any length of time (e.g. holiday), especially if there is
no floor drain (gully) in the immediate vicinity.
Take care to ensure that foreign objects (e.g. nails, pins, coins, paper clips) do not find their way
into the machine with the laundry. These may damage components of the machine (e.g. drum),
which in turn can result in damage to the laundry.
Do not wash water-repellent things(e.g. raincoats) with washing machine.
Only remove laundry from the washing machine once the drum has stopped turning. Reaching
into a moving drum is extremely dangerous and could result in injury.
Correct use
Safety with children
Keep children away from the washing machine at all times. To avoid
the risk of injury do not allow children to play on or near it or to
play with its controls. Supervise children whilst you are using it.
Older children may only use the washing machine if its operation has
been clearly explained to them and they are able to use it safely,
recognising the dangers of misuse.
For machines with a 'porthole' door, remember that the porthole glass
will be hot when washing at very high temperatures. Do not let children
touch it.
THIS WASHING MACHINE MUST BE EARTHED.
Before setting the washing machine, check it for any externally visible damage.
Do not install or use a damaged washing machine .
Before connceting the washing machine, ensure that the connection data on the
plate(voltage and current)match the electricity supply. if in any doubt,
consult a qualifiled electrician.
The electrical safety of this washing machine can only be
guaranteed when continuity is complete between it and an effective
earthing system which complies with current local and national
safety regulations. It is most important that this basic safety
requirement is present and regularly tested, and where there is any
doubt the household wiring system should be inspected by a
qualified electrician. The manufacturer cannot be held liable for the
consequences of an inadequate earthing system.
Unauthorized repairs could result in unforeseen dangers for the user, for which manufacturer can not
accept liability. Repairs should only be undertaken by an approved service technician.
Ensure current is not supplied to the machine until after maintenance of repair work has been carried
out.
If the connection cable is damaged or broken, it must only be replaced by an approved service
technician to protect the user from danger.
Faulty components must only be replaced by genuine manufacturer original spare parts. Only
when these parts are fitted the saftey standards of the machine can be guaranteed.
Do not connect the washing machine to the mains electricity supply
by an extension lead. Extension leads do not guarantee the required safety of the appliance.
Safety Notices
Read and understand thoroughly these safety instructions before
use. The items indicated here are very important safety
precautions, which must be followed. We cannot be held liable
for damage caused by non-compliance with the warning and
safety instructions or resulting from incorrect use or operation.
Cleaning and user maintenance shall not be made by children without
supervision. Children of less than 3 years should be kept away unless
continuously supervised.
T he new hose-sets supplied with the appliance
the old hose-sets should not be reused.
are to be used and
WARNING
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
This appliance is intended to be used in household and similar applications
such as:
-staff kitchen areas in shops, offices and other working environments;
-farm houses;
-by clients in hotels, motels and other residential type environments;
-bed and breakfasts type environments;
-areas for communal use in blocks of flats or in launderettes.
For washing machines having ventilation openings on the base, the washing
machines cannot be washing on the carpet.
Knob
Drawer(for detergent
or fabric softener)
Door glass
Top cover
Control panel
Case body
Door seal
Drain hose
Adjustable feet
Drain pump filter
Lower cover
Door
Unscrew the drain pump filter to let water run out when the
machine is not used for a long time.
Connection Cable
Cold water inlet valve
Transit bolts
Back cover
The drawing of machine in the manual is only used for instruction.
It may be vary from the mode you buy.
Parts and Features
Installation
Before Use
Before Use
Backout packing
Remove all the packing(including the foam base)
or the vibration and noise may occur.
Dispose all the wrappage safety and keep them out
of the reach of children. Danger of suffocation!
It is normal that water drops appear on the packing
plastic bag and the door glass, which are resulted
from the water left in the tub for checking out.
Accessories
Make sure that you have received all of the items shown below.
Accessories Name
Qty.
Accessories Name
Qty.
Inlet hose
transit bolts
caps
1
4
“U” piece
1
Manual
1
Removing transit bolts
Remove all the transit bolts at the rear of the machine with tools.
Plug the holes with the transit bolts caps supplied.
Strong vibration, noise or failures may occur if
the transit bolts are not removed.
Transit bolts
Keep the transit bolts for future transportation. Whenever the machine is
transported, the transit bolts must be refitted.
Installation
Use process
Installation
Installation place requirement
A concrete floor is the most suitable installation surface
for a washing machine, being far less prone to vibration
during the spin cycle than wooden floorboards or carpeted
surface.
The machine must be level and securely positioned. The
distance between the machine and wall must be more than
10 cm .
To avoid vibrations during spinning. the machine should not
be installed on soft floor coverings.
Level adjustment
The machine must stand perfectly level on all
four feet to ensure safe and proper operation.
Incorrect installation may increase electricity
and water consumption and may cause the
machine to move about.
To do these when the machine is not level:
Using the spanner turn locknut in a anticlockwise
direction. Then turn locknuts together with adjust
feet to unscrew.
Use a spirit level to check the machine is standing level.
Hold adjust feet securely with a pipe wrench. Turn locknut again
using the spanner until it sits firmly up against the housing.
Locknuts
Adjustable feet
Vibration and noise may occur if the locknuts do
not sit firmly up against the houses.
Drain hose connection
1.Direct into a sink
If the outlet spigot has not been used before, remove any blanking plug
that may be in place.
If required,the drain hose can be extended to a length of 4 m.
Push the drain hose onto the spigot and secure with a clip if required,
ensure a loop is formed in the drain hose to prevent waste from the sink
entering the washing machine.
2. Connected securely to a standpipe
Firstly form a hook in the end of the drain hose using the “U” piece
supplied.
Place the drain hose into your standpipe, which should have an internal diameter of approximately
30mm thus ensuring there is an air break between the drain hose and standpipe.
When discharging into a standpipe ensure that the top fo the standpipe is no more than 90cm and
no less than 60cm above floor level.
Water inlet connection
Connect the inlet hose supplied with the machine to a tap with a 3/4" thread.
Do not use previously employed hoses.
Installation should comply with local water authority and building regulations ‘ requirements.
When there is a inlet valve at the back of the machine, it must be connected to a cold water
supply. If there are two inlet valve, one is connected to a cold water supply and the other
is connected to a hot water supply. Follow the indication of the picture below to complete the
connection.
inlet valve for cold water
inlet hose for cold water with a white nut
Use process
8
8
6.5
4.5
4.5
0
8
8
8
6
2.5
4.5
3
3
80
197
49
131
100
99
11
16
74
18
81
63
48
50
51
00/20/40/60/95
00/20/40/60/95
20
95
00/20/40
00/20/40/60
60/95
_ _
_ _
00/20/40/60
00
00/20/40/60
00/20/40
00/20/40
00/20/40/60
2/3/4/5
2/3/4/5
2/3/4/5
2/3/4/5
4/5
3/4/5
2
0
1/2/3/4
5
2/3/4
3/4/5
2/3/4/5
2/3/4
2/3/4
0/400/600/800/1000/1200
0/400/600/800/1000/1200
0/400/600/800/1000
0/400/600/800
800
0/400/600/800/1000/1200
0/400/600/800/1000/1200
0/400/600/800/1000/1200
0/400/600/800
0/400/600/800
0/400/600/800/1000/1200
0/400/600/800/1000/1200
0/400/600
0/400/600
0/400/600/800
The operation panel
For your safety, please not turn the knob to the position “ ” and get clothes while the
machine is running. Because the temperature of water may be high and it may scald
you. The door lock will open automatically at the end of a wash cycle while the tem-
perature of the drum is cool down.
Turn this knob clockwise or anticlockwise to select the required wash program. Once the
“Start/Pause” button is pressed and the machine is running, the program can not be changed.
The details of programs are in Form on page 8.
(Note: At the end of a wash cycle, the knob must be turned to the position“ ”)
Press this button to start or pause a wash cycle. The door can not be opened when the machine starts.
Press this button repeatedly to set the delay time of the starting of a wash cycle from 1 hour to 24 hours.
Press this button repeatedly to change the spin speed. The detail is in Form on page 8.
1.Start/pause
5.Delay
3.Speed
6.Knob
2.Temp
Press this button repeatedly to change the wash temperature. The detail is in the form on page 8
4.Rinse+
Press this button repeatedly to change the rinse times. The detail is in Form on page 8.
Child lock (“Rinse+ ” + “Speed”)
The function of “Child lock” is to lock the control panel to prevent the misuse by children .
1.Press the “Rinse+” and “Speed” buttons at the same time for 3 seconds.
When the icon “ ” is lighted up on the screen, the function works. This function can be selected
during a washing cycle.
2.When this function works, all keys and knob are not available, except for the knob turn to the position “ ”.
Mute ( )“ ”Temp
The function of “Mute” is to close all the prompt tone and alert sounds.
How to start this function: Press the “Temp” button for 3 seconds.
How to cancel this function: Press the “Temp” button for 3 seconds again.
The functions of the control panel
The functions of the control panel
Options and functions for programs
Program
Weight
(kg)
Time
(min)
Temp(℃)
Rinse times
Spin speed(rpm)
Standard
4
Use process
Use process
Once you select the “Night Wash” program, the machine will not execute the last
drain unless the “Start/Pause” button is pressed, and the screen show “Iron”.
(Note: the max running time of this function is 12 hours . If it exceeds 12 hours, the
machine will drain and spin automatically).
Digital display: This icon shows the time, speed, rinse times, Error code.
Remaining time: this icon will shinning once the display show the remaining time.
Delay time: this icon will shinning once the display show the delay time.
The functions of the control panel
Display icon explanation
Child lock: this icon will shinning once child lock function is selected, otherwisw will gone.
Rinse+: this icon will shinning when the rinse+ function is selected.
Main wash: The logo will be bright in standby condition when selected the program with main wash
function, the logo will be flicked when machine during operation, and the logo will stay
bright when machine in pause condition, the logo will be turn off when machine finishes
operation.
Rinse: The logo will be bright in standby condition when selected the program with rinse function,
the logo will be flicked when machine during operation, and the logo will stay bright when
machine in pause condition, the logo will be turn off when machine finishes operation.
Final spin: The logo will be bright in standby condition, the logo will be flicked when machine during
operation, and the logo will stay bright when machine in pause condition, the logo will be
turn off when machine finishes operation.
Use process
9 10
How to use washer
Use process
1. Sort the laundry by colour and by care label. Most garments have a
textile care label in the collar or side seam.
2. Make sure all the pockets are empty, Foreign objects (e.g. nails, coins,
paper clips, etc.) can cause damage to garments and components in
the machine.
3. Close any zips, fasten hooks and eyes etc before washing.
4. Dark textiles often contain excess dye and should be washed separately
several times before being included in a mixed load. Always wash whites
and coloureds separately.
5. Badly soiled areas, stains etc. should be pre-treated with liquid detergent,
stain removers etc.
6. Turn over the clothes which pill easily and is with woolen surface before
putting them into the machine.
Unfold the laundry and load loosely in the drum. Mixing both large and small items gives better
wash results and also helps distribute the load evenly during spinning. The most efficient use of
energy and water is achieved when a full load is washed. However, do not overload as this causes
creases and reduces cleaning efficiency.
Make sure that no garments are caught between the
door and the seal.
It can remove the water which is left in the tub because of manufacturer’s checking out.
Before washing clothes for the first time, you must run a complete cycle without clothes.
To do these:
1.Connect the power and turn on the tap.
2.Turn the knob to position “Standard”.
3.Press “Start/Pause”.
Washing preparation
1.Connect the inlet hoses well and turn on the tap.
2.After making sure the power socket is grounded reliably, insert the power plug into the power socket.
3.Place the drain hose well.
Preparation of clothes
Diagram 1
Diagram 2
Diagram 3
Put clothes into the washer
1. Open the drawer and add adequate detergent into main wash compartment marked “ ” or “ ”.
2. Add the fabric softener into compartment marked “ ” or “ ” .
Do not exceed the maximum level mark.
3. Add the detergent into the pre-wash compartment marked “ ” or “ ”
according to the programme you select.
4. Close the drawer.
How to use washer
Use process
Using the detergent drawer
The right amount to dispenser will depend on the following:
The quantity of laundry
The soiling level of the laundry
- Lightly soiled
No visible dirt or stains. Possibly slight body odour.
- Normally soiled
Visibly dirty and/or just a few slight stains.
- Heavily soiled
Visible dirt and stains and/or dried on soiling.
The water hardness level.
Main wash compartment
Fabric softener compartment
Pre-wash compartment
It is recommended to use low foaming powder for all washing temperature programs.
Washing steps
1.Turn on the water tap, and connect the power.
2.Open the door, and put the cloth into the drum one by one.
3.Close the door, and put suitable amount of detergent and fabric softener into the
dispenser, then close the drawer.
4.Choose a programme you need by turning the knob .
5.Press the “Temp” button and select a washing temperature.
6.Press “ Start/Pause” button to start the washing machine.
7.When the cycle is finished, there is a warning tone sounds.
When washing cycle is finished, the machine will change into standby mode.
And the machine will be sleeping after 10 minutes without any control on the
control panel.
11
When the machine is started , the door lock is locked though you press the “Start/Pause”button.
Turn the knob to positiion “ ” the door lock is unlocked in two minutes.
When the temperature inside the durm is above 60℃, the door lock is locked.
When the water is above a certain level, the door lock is locked.
When the washing cycle is finished, the door lock is unlocked after two minutes.
How to use washer
Use process
Washing programme chart
Washing symbol
Fabric
Programme
Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.
Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.
Machine-washable or hand-washable wool or wool blend fabrics.
If the care label does not specify a temperature, wash using the
cold setting. Also suitable for hand-washable silks.
Reduce the spin speed.
Small loads of items which require freshening up and which can
be washed in a Cotton programme.
Standard
Quick
Separate spin for cotton and linen items
Rinse+Spin
Spin
Cotton
Synthetic
Wool
Synthetic or mixed fabrics, underwear, coloured garments,
non-shrink shirts
This programme can be used for rinsing items which can be
washed in a Cotton programme. Do not add any detergent.
The machine is fitted with a balance control device, which ensures the machine is stable
during the spin. To protect the machine, it will cut in if the laundry is not evenly distributed
in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen
several times before the unbalance disappears and normal spinning can resume. If, after
15 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin.
In this case, redistributed the load manually and reselect the spin programme.
Door lock
Important:
Do not try to open the door when the washing cycle is not finished or power supply is cut off
during the washing cycle, because the temperature may be high and you may be scalded.
12
Use process
Cleanness and Maintenance
Disconnect the machine from the mains electricity supply and withdraw the plug from
the socket before cleaning the machine.
The washing machine must not be hosed down.
Cleaning the exterior
Clean the exterior with a mild non-abrasive cleaning agent or soap and water using a well wrung-out
cloth. Wipe dry with a soft cloth.
Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaning agents.
These might damage plastic surfaces and other components because of the chemicals
they contain.
The washing drum
Clean the drum every 3 months by using the “Drum clean” programme.
Cleaning the drawer
Remove detergent residues regularly. Clear the drawer following these:
Pull out the drawer until a resistance is felt. Press down the release catch and at the same time
pull the drawer right out of the machine.
Remove the siphon from compartment and clean it.
Clean the dispenser using a brush and warm water.
Cleanness and Maintenance
Use pointed nose pliers to withdraw the plastic filter.
Clean, put back and secure. These filter should be
checked every 6 months or so, or more often if there
are frequent interruptions to the water supply.
The filter should be cleaned every 2 months or when there is
fault that the “E03” is on the screen.
Cleaning the drawer housing
Use a bottle brush to remove detergent residues
inside the drawer housing.
The filter must be put back in place after cleaning.
Important:
If the machine is exposed to temperatures below 0°C, certain precautions
should be taken.
1. Turn off the water tap.
2. Unscrew the inlet hose.
3. Unhook the drain hose from the rear support and position the end of this
hose and that of the inlet hose in a bowl. Run the spin programme.
4. Disconnect the appliance.
5. Screw the inlet hose and reposition the drain hose.
6. When you intend to start the machine up again, make sure that the room
temperature is above 0°C.
1. Disconnect the machine from
the mains electricity supply and
open the lower cover with a
screwdriver.
2. Place a container under the pump.
Unscrew and remove the filter.
3. Clean the filter carefully.
Cleaning the water inlet filter
Cleaning the drain pump filter
After use
13 14
Troubleshooting guide
1.
it is secure.
Check the connection and ensure
2. Change the temperature sensor.
1. The connection between the
temperature sensor and wire is
not secure.
2. The temperature sensor is damaged.
1. Check the connection and ensure
it is secure.
2. Change the heating tube.
1. The connection between the
heating tube and wire is not
secure.
2. The heating tube is damaged.
1. Check the connection and ensure
it is secure.
2. Check if the machine is overloaded.
Switch off the machine, and retry
when the motor becomes cool.
3. Change the motor.
1. The connection between the
motor and wire is not secure.
2. The motor is protected because
of over-heat.
3. The motor is damaged.
1. Change the water inlet.
2. Check the connection and ensure
it is secure.
3. Change the water sensor.
1. The water inlet valve is damaged.
2. The connection between the
water sensor and wire is not
secure.
3. The water sensor is damaged.
Possible Cause
The machine
fills overtime.
There is a Door
lock alarm.
1. Water tap is not open.
2. Drain hose is put down.
3. Water inlet valve is damaged.
1. Open the water tap.
2. Hook up the hose.
3. Change the water inlet valve.
“E01” is on the
screen.
Problem
Error Code
The machine
drains overtime.
Water overflows
the machine.
/ Water sensor
works abnormal.
The motor does
not work.
There is a
heating tube
fault.
There is a
temperature
sensor fault.
1. Check the drain hose.
2. Clean the filter.
3. Check the drainage system
and clean it.
1. The drain hose is squashed
or kinked.
2. The drain pump filter is block.
3. The drainage system pipes are
blocked.
1. Lock the door well.
2. Put the garment into the drum.
3. Change the door lock.
1. The door is not locked well.
2. Garments is caught between the
door and seal.
3. Door lock is damaged.
“E02” is on the
screen.
“E04” is on the
screen.
“E03” is on the
screen.
“E05” is on the
screen.
“E06” is on the
screen.
“E07” is on the
screen.
Difficult explanation
15
16
220V-240V~,50HZ
2100W
0.02-0.8MPa
595X545X845mm
Technical Parameters
Model
Parameter
Power
Washing / spin capacity
Rated power
Water pressure
Net weight / gross weight
Outer dimension
(W x D x H)mm
Note:
Data can vary from the nominal values given depending on water pressure,
water hardness, water inlet temperate, room temperature, type and volume
of load, fluctuations in the electricity supply and any extra options seleceted.
Appendix
PW-F8-W
8kg
65kg/69kg
4. The motor is damaged.
4. Change the motor.
Electric Diagram
Appendix
17
/