Kodak i100 Series User manual

i100 Series
Kodak
Brand
Kodak
Model
i100 Series
Type
User manual

This manual is also suitable for

Kodak i100 Series: A versatile scanner for various document management needs. With its ability to handle different document types and sizes, the Kodak i100 Series offers a range of capabilities:

  • Efficient Scanning: Equipped with advanced scanning technology, the i100 Series enables rapid and efficient document scanning, helping you save time and increase productivity.

  • Image Quality: Experience crisp and clear scanned images with the i100 Series, ensuring accurate reproduction of your documents.

  • Document Handling: The scanner provides flexible document handling options, allowing you to scan various document types, including receipts, invoices, contracts, and more.

Kodak i100 Series: A versatile scanner for various document management needs. With its ability to handle different document types and sizes, the Kodak i100 Series offers a range of capabilities:

  • Efficient Scanning: Equipped with advanced scanning technology, the i100 Series enables rapid and efficient document scanning, helping you save time and increase productivity.

  • Image Quality: Experience crisp and clear scanned images with the i100 Series, ensuring accurate reproduction of your documents.

  • Document Handling: The scanner provides flexible document handling options, allowing you to scan various document types, including receipts, invoices, contracts, and more.

for Kodak Scanners
Cleaning and Consumable Replacement Instructions
I
M
anualnstruction
Versitec is a division of Cranel, Inc.
i100/i200/i260
INSTRUCTION MANUAL FOR
KODAK
i100/i200/i260 Scanner
Versitec 1- 888 - 722 - 6548 www. versitec.com
Step One: Cleaning the scanner......................................2
Step Two: Cleaning the separator module....................3 - 4
Step Three: Cleaning the feed module........................4 - 5
Step Four: Cleaning drive rollers & transport area.......6 - 7
Step Five: Cleaning the imaging guides...........................7
Step Six: Cleaning the paper path...................................8
TABLE OF CONTENTS
I. i200 Scanner Maintenance
II. i200 Replacing Parts
Step One: Replacing the feed Module & feed....................9
For inquiries during any of these procedures,
contact the Versitec Customer Support Center
at 1-800-224-3475.
Versitec 1- 888 - 722 - 6548 www. versitec.com 1
Step Two: Cleaning the paper path................................10
Step Three: Replacing parts..................................10 - 11
Cleaning the scanner
2 Versitec 1- 888 - 722 - 6548 www. versitec.com
The scanner will collect dust and other debris during routine scanning.
For optimal scanner performance, follow the detailed cleaning instructions
in this section and clean the feed module rollers, separator module rollers,
imaging guides, transport area, and paper path at least once per week.
Clean the scanner and paper path daily if you are scanning carbonless
paper or newsprint, or if you are using the imprinter.
Use only these cleaning materials:
IMPORTANT
Staticide Wipes contain isopropanol which can cause eye
irritation and dry skin. Wash your hands with soap and
water after performing maintenance procedures. Refer to
the Material Data Safety Sheet (MSDS) for more information.
The MSDS is available on the Kodak web site at
www.kodak.com/go/MSDS.
Allow all rollers to dry completely before using the scanner.
NOTE:
The use of any other cleaning materials could damage your scanner.
Use fresh cleaning material unless otherwise indicated.In addition
to the recommended cleaning supplies, you may use a vacuum
cleaner to remove debris from the scanner. Some debris from the
rubber tires on the feed module and separator module is normal.
Tire debris does not always mean that the tires are worn or damaged.
After cleaning, inspect the tires for wear and replace the separator
module or feed module if necessary.To order cleaning supplies, refer
to Appendix B, Supplies and Accessories.
I.
i i
i i
i
260260
260260
260
Maintenance Maintenance
Maintenance Maintenance
Maintenance
Item CAT No.
Kodak Digital Science Roller Cleaning Pads (24) 853-5981
Staticide Wipes for KODAK Scanners (144) 896-5519
Kodak Digital Science Transport Cleaning Sheets (50) 169-0783
Cleaning the separator module
5 Remove the separator module by pulling it down and lifting it off.
Separator
module
1 Power down the scanner.
2 Remove any documents from the feeder area.
3 Lift up the scanner door release to unlatch the scanner door.
4 Pull up to open the scanner door.
Versitec 1- 888 - 722 - 6548 www. versitec.com 3
Front Roller
Cover
Cleaning the Feed Module
1 Push against the raised edge on the left side of the front roller cover to
the side and pull the cover up and out to remove it.
4 Versitec 1- 888 - 722 - 6548 www. versitec.com
6 Manually rotate and wipe the separator module rollers with a roller
cleaning pad.
7 Inspect the rollers. If the separator roller tires show signs of
wear or damage, replace the tires or the separator module.
8 Insert the separator module and align the shaft ends.
9 Press until the separator module clicks into place.
10 Go to the next section to clean the feed module.
4 Inspect the feed module. If the feed module tires show signs of
wear or damage, replace the tires or the feed module.
5 Remove any dust or debris from the tray area under the feed
module and the front roller cover.
6 Insert the feed module by aligning the pins and pushing it toward
the right to fit it into position.
7 Re-install the front roller cover.
8 Go to the next section to clean the drive rollers and transport area.
Versitec 1- 888 - 722 - 6548 www. versitec.com 5
Feed module
3 Manually rotate and wipe the feed module rollers with a roller
cleaning pad.
2 Remove the feed module by pushing it to the right and lifting it out.
Cleaning the Drive Rollers and
Transportation Area
6 Versitec 1- 888 - 722 - 6548 www. versitec.com
1 Manually rotate and wipe the drive rollers with a roller cleaning pad.
2 Clean any dust or debris in the slots around the drive rollers.
3 Wipe the upper and lower transport areas with a roller cleaning pad.
4 Dry the transport area with a dry Staticide Wipe.
5 Push against the raised edge on the left side of the rear roller cover
and pull the cover up and out to remove it.
Rear roller
cover
6 Remove any dust or debris under the rear roller cover.
7 Re-install the rear roller cover.
8 Go to the next section to clean the imaging guides.
Cleaning the Imaging Guides
Clean the exposed (top side) surfaces of the imaging guides.
You do not need to remove the imaging guides for cleaning.
1 Wipe the upper and lower imaging guides with a Staticide Wipe.
2 Dry the imaging guides with a dry Staticide Wipe.
3 Lower the scanner door and press it down firmly until it latches
into place.
4 Go to the next section to clean the paper path.
Versitec 1- 888 - 722 - 6548 www. versitec.com 7
Cleaning the Paper Path
1 Remove the wrapping from the Transport Cleaning Sheet.
2 Adjust the paper feeder guides to fit the cleaning sheet.
3 Feed the cleaning sheet (adhesive side up) through the scanner in portrait
orientation until all residue is removed from the drive rollers.
4 Adjust the feeder guides to fit, then feed the cleaning sheet (adhesive side
up) through the scanner in landscape orientation until all residue is
removed from the drive rollers.
5 Using the same cleaning sheet, repeat Steps 3 and 4, but feed the
cleaning sheet through the scanner with the adhesive side down until all
residue is removed from the drive rollers.
When a cleaning sheet gets very dirty, discard it and use a new one.
Customer-replacement parts (feed module, separator module,
pre-separationpad, roller tires, and installation instructions) are
available in the following kits:
Replacing Parts
II .
i i
i i
i
260260
260260
260
Replacing PartsReplacing Parts
Replacing PartsReplacing Parts
Replacing Parts
NOTE:
8 Versitec 1- 888 - 722 - 6548 www. versitec.com
KODAK Extra-Large Feeder Consumables Kit for
i200 Series Scanners (5 complete feed modules, 5 complete
separator modules, 10 pre-separation pads, 90 roller tires)
KODAK Feeder Consumables Kit for i260 Series Scanners
(1 complete feed module, 1 complete separator module,
2 pre-separation pads, 18 roller tires)
• KODAK Separator Module for i260 Series Scanners:
200,000 document pages
• KODAK Feed Module for i260 Series Scanners:
500,000 document pages
Use only these replacement parts in your scanner.
The expected life of customer-replaceable parts is shown below.
Item
CAT No.
124-1066
821-5808
The composition of the roller materials was engineered to provide the
ultimate in feeding reliability across the broadest range of document
types, sizes, and thicknesses. Expected life figures are offered as
guidelines for operations that follow the recommended scanner cleaning
procedures in this section and that scan document types within the
recommended paper types (refer to “Preparing Documents for Scanning”
in the Introduction section).Your experience may vary. Certain paper
types (such as carbonless paper or newsprint), failure to clean regularly,
and/or use of nonrecommended cleaning solvents can shorten roller life.
To order replacement parts, refer to Appendix B, Supplies and Accessories.
NOTE:
Versitec 1- 888 - 722 - 6548 www. versitec.com 9
For inquiries on consumables, call Versitec at: 888.722.6548
Corporate Headquarters
8999 Gemini Parkway
Columbus, OH 43240
Fax: 614.431.8388
Repair Center
908 Boston Turnpike Road
Shrewsbury, MA 01545
Fax: 508.460.1890
Western Region Office
8001 Irvine Center Drive, 4th Floor
Suites 411, 412, 413
Irvine, CA 92618
www.versitec.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Kodak i100 Series User manual

i100 Series
Kodak
Brand
Kodak
Model
i100 Series
Type
User manual
This manual is also suitable for

Kodak i100 Series: A versatile scanner for various document management needs. With its ability to handle different document types and sizes, the Kodak i100 Series offers a range of capabilities:

  • Efficient Scanning: Equipped with advanced scanning technology, the i100 Series enables rapid and efficient document scanning, helping you save time and increase productivity.

  • Image Quality: Experience crisp and clear scanned images with the i100 Series, ensuring accurate reproduction of your documents.

  • Document Handling: The scanner provides flexible document handling options, allowing you to scan various document types, including receipts, invoices, contracts, and more.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents