Polycom HDX 8000 series Quick Reference Manual

Quick Reference Guide for Polycom HDX8000

Turn On the System

 Power on Polycom.

 Power on Television, select the input signal source. The Polycom

startup screen should appear in 3-4 minutes. Once the “Dial Up”

screen shows, the system is ready for receiving call or placing a

call.

To Receive A Call From Polycom Conference Equipment

 Wait for the “Dial In” tone and the “Dialer” IP address appears.

 Check the “Dialer” IP address and accept the call.

To Place A Call To a Conference Equipment

 Display the onscreen keyboard to enter the text.

 Enter the receiver’s IP address on the screen using the remote

control with “dot” in the format: XXX.XXX.XXX.XXX

 Place a call with the “Place or answer a call” button.

To Adjust the Volume

 Press “+” or “-“

To Mute the Microphone

 Press mute button.

To Zoom in/out

 Press “+” or “-“

To End a Call

 Press “End a call” button.

 Confirm after prompted.

Please turn Off the Polycom and Television after use