Babyhug Hercules Stroller
130 mm
180 mm
Style code – BGST016
Strong & Sturdy Frame
4 Reclining Positions
5 Point Safety Harness
Single Hand Fold
Please read the manual thoroughly before using. Keep the manual for any future reference.
Imported & Marketed by
Brainbees Solutions Pvt. Ltd.
Corporate & Registered Office Address:
Rajashree Business Park, Plot No: 114,
Survey No. 338, Tadiwala Road,
Near Sohrab Hall, Pune 411 001
Installation
Canopy
Handle bar
Food tray
Front tube
Adjust leg rest
Brake for rear wheels
Rear wheels
foot rest
Fixed key of front wheel
Front wheel
Basket
Side handrail
Spring
Fixture
Fold Hook
1. Opening the Stroller:
Take off the close coupler, grip the handle bar and pull it up and then back,
open the baby stroller, when the click sound is heard, it is in place.
2. Installing and Removing of Handle Bar:
As shown in the figure, adjust the handle bar to be vertical with the ground,
then insert the end of the handle bar into fixture on both sides. When you
hear a click sound it is installed properly.
To remove the handle bar, first adjust the handle bar to be vertical with the
ground, then press the spring and pull out as shown in the figure.
Velcro
Button
3. Installing the Basket
As shown, let 3 buttons of rear part of basket through the basket tube
and fasten them, then fix the rest button fixed on the small support
beside the front tube, finally fix the Velcro on the basket tube. Doing vice
versa way could take off the basket.
cap (black)
buckle (white )
wheel cap (grey )
Key for disassemble front wheel
Fixed direction key for front wheel
Spring leaf
C
D
Brake
4. Installing Front Wheel
As shown, insert the axle in to the front wheels group, once you hear the
click sound, installation is done. When disassembling, press the key and
pull the wheels down.
Swivel and fixed: push the fixed key up and insert into tube cover, swivel
is locked. Opposite way will make the wheels swivel again.
5. Installing Rear Wheel
As shown in picture “A” press the button on the outside of the wheel and
insert the axle on the wheel and release the button. Spin the wheel, you
will hear click sound, which means it is fixed.
As shown in picture “B” install the buckle, cap and wheel cap. Click sound
is the indicator that it is fixed. For removing press the spring lever on
both sides and pull the wheels down.
As shown in picture “D”, press down the lever to lock and the opposite
releases the lock.
Spring leaf
Spring leaf
6. Food Tray
As shown in the picture insert the food tray in to the relevant hole. Click
sound is the indicator that it is fixed. To remove, press the button on both
sides and pull the tray out.
7. Canopy
As shown, insert both sides of the canopy in to the relevant space. Press
the spring lever and push the rod in place till the spring lever resets.
To remove, press the spring lever and pull the canopy out.
adjust key for backrest
8. Backrest Adjustment
Hold the adjusting lever and move the backrest to the desired angle.
9. Legrest Adjustment
Press the hooks on both sides and adjust legrest as shown in the picture.
10. Canopy Adjustment
As shown in the picture, pull down or push
up the canopy as per requirement.
Safety
belt hole
Strapet
hole
Crotch
belt hole
11. Cotton Cushion
Insert the safety belts through the holes provided in the cushion and
secure to fix the cushion.
12. Reversible Handle
Push the lever up on both sides as shown in the picture and move the
handle to the other side until you hear the click sound.
Handle rotated buckle
13. Folding the Stroller
Before folding, lock the wheel brakes, move the handle to the side of the
canopy, keep the backrest in the erect position and fold the canopy. Push
the red button on the handle towards left and press down,
simultaneously push the handle forward to fold the stoller. Once folded
hook the close coupler.
Fold
hook
14. 5 Point Safety Harness
1. Buckle the four belts as shown in the picture, then insert them in the
middle button. When you hear the clicking sound the harness is fixed.
2. Adjust the shoulder belts and waist belts for perfect fit.
3. Press the button in the middle to release the harness.
Note: Fasten the harness every time the child is seated in the stroller.
09
10
Warning
• Always keep the stroller away from fire.
• Please read the instruction carefully before using the stroller. Keep
the manual safe for future reference. Not following the instruction
properly can harm the child.
• Never leave the child unattended in the stroller.
• Ensure all locks are securely fastened before using the stroller.
• Always keep the children away, when folding or unfolding the stroller,
to avoid injuries.
• Do not let the children play with the stroller.
• The suitable age for the using the stroller is 0 to 36 months.
• Check that the stroller body and seat unit attachment devises are
correctly engaged before use.
• This product is not suitable for running or skating.
• The maximum capacity of the stroller is 15kg, load capacity of the
storage basket is 2kg and pocket is 0.2kg. Please do not over load.
• The backrest should be reclined to the lowest position (flat) while
using the stroller for babies under 6 months.
• Do not add mattress thicker than 25mm.
• The wheels should be locked while placing or removing the child.
• The stroller should be used for only one child at a time.
• Any load attached the handles, back rest or sides of the stroller will
affect the stability of the stroller.
• Please avoid using the stroller in uneven roads.
• Avoid using or storing the stroller in wet, cold or high temperature
and keep away from fire or strong heat source.
• To avoid serious injuries from falling down or sliding out, secure the
safety harness when ever you seat the baby in the stroller.
Maintenance:
• For cleaning the fabric, remove the screws and take out the fabric out
of the stroller.
• Wipe the fabric lightly with natural soap and cold water and let it air
dry.
Babyhug multi purpose cleanser is best recomended
• Do not bleach, press or dry clean the fabric of the stroller.
• Wipe the metal and plastic parts of the stroller with a wet cloth. Do not
use harsh chemicals or bleach for cleaning.
• Keep checking for loose screws, damaged parts and broken threads.
• While assembling and dismantling the stroller, follow the instructions
on the user manual carefully.
-
1
-
2
-
3
-
4
-
5
-
6
