Polti Vaporetto Lecoaspira Program Owner's manual

Brand: Polti

Model: Vaporetto Lecoaspira Program

Category: Steam cleaners

Type: Owner's manual

This manual is also suitable for

Lecoaspira Program

Polti S.p.A. - 22070 Bulgarograsso (CO) - Italy - Via Ferloni, 83

www.polti.com

PROGRAM

Fig. 7

Fig. 1

MAX

Fig. 5

Fig.11c

Fig. D

Fig. E

Fig. 4

Fig. 8

Fig.10

Fig. 9

Fig.11b

Fig.11a

Fig. 12

Fig.A1

Fig.A2

Fig.A3

Fig. b

Fig. F

Fig. G

Fig. 2 Fig. 3

Fig. 6 Fig.6a

Fig. C

COP - LECOASPIRA PROGRAM - M0S10133 - 1T10:V_tto_1300cop.qxd 23/10/2013 9.40 Pagina 2

Polti S.p.A. - 22070 Bulgarograsso (CO) - Italy - Via Ferloni, 83

www.polti.com

PROGRAM

Fig. 7

Fig. 1

MAX

Fig. 5

Fig.11c

Fig. D

Fig. E

Fig. 4

Fig. 8

Fig.10

Fig. 9

Fig.11b

Fig.11a

Fig. 12

Fig.A1

Fig.A2

Fig.A3

Fig. b

Fig. F

Fig. G

Fig. 2 Fig. 3

Fig. 6 Fig.6a

Fig. C

COP - LECOASPIRA PROGRAM - M0S10133 - 1T10:V_tto_1300cop.qxd 23/10/2013 9.40 Pagina 2

Vaporetto Lecoaspira Program - M0S10133 Ed. 1T10

MAX

OPTIONAL

COP - LECOASPIRA PROGRAM - M0S10133 - 1T10:V_tto_1300cop.qxd 23/10/2013 9.40 Pagina 1

Vaporetto Lecoaspira Program - M0S10133 Ed. 1T10

MAX

OPTIONAL

COP - LECOASPIRA PROGRAM - M0S10133 - 1T10:V_tto_1300cop.qxd 23/10/2013 9.40 Pagina 1

LECOASPIRA PROGRAM

ENGLISH

KEEP THESE INSTRUCTIONS

• Read these instructions carefully before using the appliance.

• Any use which does not comply with these instructions will invalidate the warranty.

• If this instruction manual is lost, it is possible to review it and/or download it from

the web site www.polti.com

• Unpack the product and make sure it is intact as well as all the accessories li-

sted in the key. If in doubt, do not use the product and contact an Authorized

Service Centre.

• This appliance has been designed only for domestic use.

• This appliance can be used by children aged from 8 years and above and per-

sons with reduced physical, sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the hazards involved. Chil-

dren shall not play with the appliance. Cleaning and user maintenance shall not

be made by children without supervision. Keep the iron and its cord out of reach

of children less than 8 years of age when it is energized or cooling down.

• Children should be supervised to ensure that they do not play with the ap-

pliance.

• In case the appliance is accidentally dropped, it is necessary to have it checked

by an authorized Service Centre as the internal safety features may have been

affected.

• High-pressure jets can be dangerous if used improperly. Do not direct the steam

jet at people, live electrical equipment or the appliance itself.

• Keep all the parts of the packaging out of the reach of children, they are not a

toy. Keep the plastic bag out of the reach of children: danger of suffocation.

ATTENTION: High temperature. Risk of scalding!

If indicated do not touch the parts on the product

ATTENTION:

Risk of scalding!

PRECAUTIONS

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 34

LECOASPIRA PROGRAM

ENGLISH

- The wiring system to which the appliance is connected must always comply with

the laws in force.

- Before connecting the appliance, make sure that the mains voltage is the same

as the voltage indicated on the data label of the appliance and that the power

outlet is connected to earth.

- Always turn off the appliance at the on/off switch before unplugging it.

- If the appliance is left unused, disconnect it from the mains. Never leave the ap-

pliance unattended with the cable plugged into the mains.

- Always make sure the appliance is unplugged before performing maintenance

work of any kind.

- Do not pull the power cable out of the socket, but grasp the plug itself to avoid

damage to the socket.

- Do not allow the power cable to be twisted, crushed, stretched, or come into

contact with sharp or hot surfaces.

- Do not use the appliance if the power cable or other important parts of the ap-

pliance are damaged. Instead, contact an authorised service centre.

- If the supply cord is damaged, it must be replaced by the manufacturer, its ser-

vice agent or similarly qualified persons in order to avoid a hazard.

- Do not use electric extension leads that are not authorized by the manufacturer,

as they may cause damage or fire.

- Never touch the appliance with wet hands or feet with the cable plugged into the

mains.

- Do not use the appliance when barefoot.

- Do not use the appliance near washbasins, bathtubs, showers or containers full

of water.

- Never immerse the appliance, the cable or the plugs in water or another liquid.

- Do not direct the steam jet at live electrical and/or electronic equipment or at the

appliance itself.

SAFETY WARNINGS

Risk of electric shock and/or sort circuit

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 35

LECOASPIRA PROGRAM

ENGLISH

- Use of the appliance in places where there is a danger of explosions is prohibi-

ted.

- Do not use the product with toxic substances.

- In case of breakdown or malfunction switch off the appliance and never attempt

to disassemble it, but refer to an authorized Polti Service Centre.

- This appliance is equipped with safety devices which are to be replaced only by

a suitably qualified technician.

Before cleaning or storing the appliance, always first ensure that the appliance has

cooled down completely.

- Do not direct the steam jet at people, animals or debris.

- Never place your hands inside the jet of steam.

- Do not use if the appliance has been dropped, has visible signs of damage or

leaks.

- Do not use the appliance to suck up acids or solvents, as these might cause se-

rious damage to the appliance and above all do not suck up explosive dust or li-

quids, as these could cause explosions on coming into contact with the inside com-

ponents of the appliance.

- Do not suck up toxic substances.

- Do not suck up burning or incandescent objects such as embers, ash or other mate-

rial in which combustion is taking place.

- Never direct the suction towards persons or animals.

- If ironing whilst sitting down, take care to ensure that the jet of steam is not angled

towards your legs. Steam can scald.

- Before connecting the appliance to the current, ensure that the continuous steam jet

button is not pressed.

- Never leave the iron unattended when it is plugged in.

- Never leave the appliance unattended during use and when it is connected to

the mains.

- Before refilling the appliance when it is hot, allow it to cool for a few minutes.

- Keep your face away if you fill the boiler when it is still hot, the water can evapo-

rate on contact with the hot boiler, causing a jet of steam.

When filling a hot boiler, we recommend adding small amounts of water to avoid

SAFETY WARNINGS

Risk of injuries and/or burns when using the appliance

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 36

LECOASPIRA PROGRAM

ENGLISH

the water evaporating instantly with the risk of burning.

- Do not empty the appliance when the water inside the boiler is still hot.

- Do not try to unscrew the cap when the appliance is in operation.

- Regularly check the status of the safety cap and seal, replace with original parts

as necessary.

- Make sure the safety cap is screwed on properly, otherwise it may cause steam

leaks.

- Do not force open the cap when there is a minimum pressure of steam in the

boiler.

Never leave the filling bottle or the funnel resting on the mouth of the boiler, with

the product connected to the power supply, since this could cause burns.

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 37

LECOASPIRA PROGRAM

ENGLISH

- This appliance has been designed to work with normal tap water.

Absolutely do not use distilled water, dryer condensate water, perfumed water,

rain water, battery water, water from air conditioning systems and the like. Do

not use chemical substances or detergents.

- Do not use limescale products other than Kalstop FP2003.

- Never leave the appliance exposed to the weather.

- Do not place the appliance near a live element, an electric stove or any other

source of heat.

- Do not expose the appliance to temperatures unde 32°F (0 °C) e superiori ai

104°F (40 °C).

- Press the buttons only with a finger, without excessive force and avoid using a

pointed object such as a pen.

- Do not wind the power cable around the appliance, especially when the ap-

pliance is still hot.

- To avoid prejudicing the safety of the appliance when repairing or replacing ac-

cessories, use only original spare parts.

- Let the appliance cool down before cleaning it.

- Before storing the appliance make sure that it has completely cooled down.

- The water container can be filled with tap water.

- Do not suck up materials such as cement, chalk etc. which solidify once they

come in contact with water thus damaging the appliance.

- It is necessary to keep the unit in horizontal position during operation.

- Always rest the appliance on a stable surface.

- Iron only on supports that are heat resistant and which allow the steam to per-

meate.

- If the iron rest mat needs to be replaced, only use original spare parts.

- The iron must be used and rested on a stable surface.

- When placing the iron on its stand, make sure that the surface on which the

stand is placed, is stable.

- Do not place the hot appliance on heat-sensitive surfaces.

- Keep the device out of the reach of children, when it is on and during cooling.

SAFETY WARNINGS

Using the appliance

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 38

LECOASPIRA PROGRAM

ENGLISH

Read these instructions carefully before using the appliance.

CONGRATULATIONS

Dear Customer,

Thank you for purchasing our product.

By choosing Vaporetto Lecoaspira, you will have a complete appliance for cleaning your home,

capable of vacuuming solids and liquids, sanitising with steam, drying and eliminating dust mites

and allergens. You can decide, depending on your needs, whether to use the steam and

suction together for complete cleaning, just the suction to effectively collect dust or just the

steam for specific cleaning tasks.

Lecoaspira Program is equipped with advanced features of the most modern electronics. In

fact, it is capable of operating fully 4 cleaning programmes, automatically setting the optimal

suction power and pressure of the steam depending on the surface to be cleaned

The suction feature:

The heart of the filtration system is represented by the exclusive “Eco-Active” water filter,

patented by Polti. The “Eco-Active” water filter uses the natural purifying force of water to trap

dirt, preventing dispersion of dust into the environment. In addition, the HEPA filter collects

impurities including pollen as well as dust mites.

The steam feature:

The Lecoaspira steam is dry and powerful. Thanks to the heat, it removes and dissolves dirt

eliminating grease, germs and dust mites. The sanitising force of steam is completely natural

and has a cleaning power that even the most modern chemical detergents cannot equal.

You can find useful suggestions on our website www.polti.com to take full advantage of all the

features of your Lecoaspira. Please consult the “Guide for a Healthy and Clean Home” found

on the home page of the website.

We hope you enjoy your Polti product.

This unit conforms with EC-directives 2004/108/CE (EMC) and 2006/95/CE

(low voltage).

Polti S.p.A. reserves the right to change equipment or accessory specification wi-

thout prior notice.

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 39

LECOASPIRA PROGRAM

ENGLISH

- KEY ..........................................................................................................................page 41

- TECHNICAL DATA............................................................................................... ....page 42

- IDENTIFICATION ....................................................................................................page 42

- ATTENTION:

INFORMATION FOR USERS ............................................................... page 43

- CORRECT USE OF THE PRODUCT .....................................................................page 43

- SYMBOLS DISPLAYED ON THE APPLIANCE AND/OR ACCESSORIES...............page 44

- UNPACKAGING ......................................................................................................page 44

- PREPARING FOR USE ..........................................................................................page 45

- PREPARATION FOR SUCTION USE ........................................................................page 45

- PREPARATION FOR STEAM USE ............................................................................page 45

- SWITCHING ON .................................................................................................... page 46

- HOW TO USE: SUCTION ...................................................................................................page 46

- HOW TO USE: STEAM .......................................................................................................page 47

- HOW TO USE: STEAM + SUCTION....................................................................................page 47

- METHOD OF USE: PROGRAMMED...................................................................................page 48

- SHORTAGE OF WATER IN THE BOILER ..............................................................page 50

- SAFETY CAP ...........................................................................................................page 50

- RECOMMENDATIONS FOR CLEANING DELICATE SURFACE ............................page 51

- AFTER USE .............................................................................................................page 52

- OPERATIONS TO BE CARRIED OUT AFTER USE ...........................................................page 52

- EMPTYING AND CLEANING THE DIRT CONTAINER ......................................................page 52

- CONNECTING THE ACCESSORIES ...................................................................page 53

- SUGGESTIONS FOR THE USE OF ACCESSORIES ............................................page 55

- OPTIONAL ACCESSORIES ...................................................................................page 59

- GENERAL MAINTENANCE ............................................................................ .......page 62

- CABLE STORAGE .............................................................................................................page 62

- CLEANING THE WASHABLE HEPA FILTER ......................................................................page 62

- HOW TO REPLACE THE SEALS .......................................................................................page 63

- TROUBLESHOOTING .............................................................................................page 64

INDEX

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 40

LECOASPIRA PROGRAM

ENGLISH

1) Main switch

2) “OK” button

3) “SET” button

4) Steam/programme “UP” button

5) Steam/programme “DOWN” button

6) Carrying handle

7) Tank cap

8) Display

8A) Programme indicator

8B) Steam quantity indicator

8C) Suction speed indicator

8D) Steam indicator

8E) Suction indicator

8F) Boiler indicator

8G) Lamp indicating lack of water in tank

8H) Maintenance indicator

9) Flap of the built-in socket

10) Built-in socket

11) Air outlet grill

12) Pivoting wheels

13) Power supply cable

14) Supply cable canal

15) Supply cable storage

16) Accessories holder

17) HEPA filter

18) Unhooking lever for HEPA filter

19) HEPA filter holders

20) Dirt container

21) MAX level

22) Dirt container handle

23) “Eco-Active” water filter assembly

24) “Eco-Active” water filter assembly cover

25) Shaped filtering sponge

26) Filter body with microholed net

27) Elbow tube

A) Flexible steam+suction hose

A1) Fitting for connecting accessories

A2) Handle

A3) Safety button

A4) Suction button

A5) Steam button

A6) Monobloc plug

A7) Locking button of the monobloc plug

B) Steam+suction extension tube

B1) Steam+suction extension tube with

parking

B2) Accessory locknut

C) Universal brush

C1) Bristle insert for universal brush

C2) Rubber insert for universal brush

C3) Rigid insert for universal brush

C4) Slides for locking fittings into place

D) Steam+suction nozzle

D1) 225 mm window cleaning insert for

stem+suction nozzle

D2) 155 mm window cleaning insert for

steam+suction nozzle

D3) Bristle insert for steam+suction nozzle

E) 120° steam+suction accessory

E1) Steam lance

E3) Coloured brushes for 120°

steam+suction accessory

O1) Terry cloth

O2) Cloth

O3) Parquet cloth

P) Spare gaskets

Q) Filler bottle

R) Tank cleaning brush

U) 2 Phials of Kalstop FP2003

E2) Small suction nozzle

F) Suction lance

G) Upholstery suction nozzle

H) Suction brush with soft bristles

I) Telescopic suction tube

IA) Telescopic tube release button

L) Parquet brush

T) Biecologico

E4) Brass brushes

M) Turbo-brush

M1) Surface type selector

N) Mini turbo-brush

S) Professional iron

S1) Continuous steam button

S2) Steam request button

S3)“ Iron heating” indicator light

S4) Temperature adjustment knob

S5) Iron rest mat

OPTIONAL ACCESSORIES

SUCTION ACCESSORIES

SUCTION - STEAM ACCESSORIES

KEY

For easy identification, accessories are

marked by the reference specified in this table.

NOTE

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 41

LECOASPIRA PROGRAM

ENGLISH

The technical data label is applied to the bottom of the appliance. When requesting information

from the Authorised Service Centre or Customer Services, please always specify the name of the

model and the serial number printed on the Technical Data label.

IDENTIFICATION

BOILER ALP EXTRA ALUMINIUM

BOILER VOLUME l 1.1

MAX PRESSURE bar 5

COLLECTION TANK CAPACITY

Max clean-water capacity

l 1.2

COLLECTION TANK CAPACITY

Max dirty-water capacity

l 1.8

VOLTAGE V 220 - 240

FREQUENCY Hz 50/60

MOTOR POWER W 1100

BOILER POWER W 1100

MAX POWER W 2200

FLEXIBLE HOSE HANDLE VOLTAGE V

(Low safety voltage)

NOISE dB 75.6

PROTECTION GRADE IPX4 (Splash Proof)

NET WEIGHT (without accessories)

Approximate without water

Kg 8.5

STEAM FLOW RATE g/min 100

DIMENSIONS (LxWxH) cm 49 x 32 x 33

TECHNICAL DATA

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 42

LECOASPIRA PROGRAM

ENGLISH

INFORMATION FOR USERS

Directive 2002/96/EC (Waste Electrical and Electronic Equipment - WEEE): information for users

This product complies with EU Directive 2002/96/EC.

The crossed-out wastebasket symbol on the appliance means that at the end of its useful

lifespan, the product must be disposed of separately from ordinary household wastes.

The user is responsible for delivering the appliance to an appropriate collection facility at

the end of its useful lifespan.

Appropriate separate collection to permit recycling, treatment and environmentally compatible dis-

posal helps to prevent negative impact on the environment and human health and promotes the re-

cycling of the materials making up the product. For more information on available collection facili-

ties, contact your local waste collection service or the shop where you bought this appliance

This appliance is intended for home use as a generator of steam and as a vacuum of liquids, dust

and dirt in accordance with the instructions provided in this manual. Please read these instructions

carefully and keep them, as you may find them useful in future.

Polti S.p.A. declines all liability for any damage or accident deriving from any use of this

appliance which is not in conformity with the instructions contained in this booklet.

Vaporetto Lecoaspira Program is a multi-function appliance which, depending on the need and

type of cleaning you want to do, can be used:

- Just as a vacuum to remove dust from surfaces. In this case, remember to add water to the dirt

collection container.

- Just as a steam cleaner to sanitise surfaces. For this feature, the container must be filled with

water to supply the boiler.

- To use the suction and steam features at the same time to vacuum, wash and dry at the same

time. Naturally, in this case both the dirt collection container and the tank must be filled.

CORRECT USE OF THE PRODUCT

ATTENTION

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 43

LECOASPIRA PROGRAM

ENGLISH

Unpack the product and check that it is intact.

Check that all the accessories listed in the key are included.

UNPACKAGING

SUCTION SPEED INDICATOR

LAMP INDICATING LACK OF WATER IN TANK

MAINTENANCE INDICATOR

STEAM INDICATOR

SUCTION INDICATOR

STEAM QUANTITY INDICATOR

MAXIMUM LEVEL OF WATER TO PLACE IN THE DIRT COLLECTION

TANK

WARNING: STEAM CAUSES SERIOUS INJURIES IN CASE OF CON-

TACT WITH THE BODY

WARNING LABEL:

DO NOT PLACE BIOECOLOGICO IN THE BOILER TANK

SYMBOLS DISPAYED ON THE APPLIANCE

AND/OR ACCESSORIES

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 44

LECOASPIRA PROGRAM

ENGLISH

♦ Lift the handle (22) of the dirt collection container (20) (Fig. 3).

♦ Remove the container (20) from its housing , turn the handle (22) of the container backwards

(Fig. 4) in order to remove the “Eco-Active” filter assembly (23).

♦ Fill the container with about 1,2 L of plain tap water up to the MAX indicator (21).

You can also add Bioecologico, the natural, anti-foam liquid and deodorant to the contai-

ner which, in addition to filling the room with a pleasant perfume, prevents the formation of foam in

the water filter, guaranteeing the correct operation of the appliance. (For more detailed information

please refer to the specific paragraph).

♦ Replace the filter assembly (23) in the dirt container (20) returning it to its original position.

♦ Reposition the dirt container (20) in the specific space and turn the handle until it returns to its

starting position.

Incorrectly inserting the collection container can cause a reduction in

the suction capacity.

♦ Unscrew the safety cap (7) (Fig. 1).

♦ Fill the boiler with about 1,1 l of water using the appropriate filler bottle (Q).

♦ Screw the cap back on (7) carefully, making sure that the safety cap is screwed on properly, otherwise

steam make leak out. In this case turn off the appliance, unplug it from the mains and wait for it to

cool before screwing the cap back on.

TYPE OF WATER TO USE

This appliance has been designed to work with normal tap water.

However, since water contains limestone by nature, which may cause scaling in the long run, we

recommend using a 50/50 mixture of tap water and demineralised water or treated with softening

systems. To use tap water and avoid scale formation, we recommend the addition of the special

natural scale removal agent Kalstop FP2003.

When filling, make sure that the water does not overflow, to avoid wetting the surface on

which your Vaporetto is resting.

Absolutely do not use distilled water, dryer condensate water, perfumed

water, rain water, battery water, water from air conditioning systems and the like. Do not use

chemical substances or detergents.

Never leave the filling bottle or the funnel resting on the mouth of the boi-

ler, with the product connected to the power supply, since this could cause burns.

NOTE

ATTENTION

PREPARATION FOR STEAM USE

FILLING THE BOILER

ATTENTION

NOTE

PREPARATION FOR SUCTION USE

FILL THE DIRT COLLECTION CONTAINER/FILTER WITH WATER

PREPARING FOR USE

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 45

LECOASPIRA PROGRAM

ENGLISH

♦ Open the monoblock socket door (9), insert the monobloc plug (A6) of the flexible hose (A) pu-

shing it until you hear the click of the hooking mechanism (A7) (Fig. 6-6a).

♦ Connect the power plug to a suitable electric socket.

♦ If the appliance is switched off: Switch it on by pressing the main switch (1).

♦ When it is turned on, the appliance starts in manual mode MA.

ADJUSTMENT OF THE SUCTION LEVEL

By simply pressing the button (A4) you can select the suction power according to the type of sur-

face you are cleaning.

♦ By increasing the suction power, the sections of the indicator (8C) increase.

♦ when reducing the suction power, the segments decrease.

♦ To stop the suction press the key (A4).

When the appliance is switched on again, the suction level will be that set last time it was

used.

IN CASE OF AUTOMATIC STOP

When the dirt sucked into the water container (20) reaches the maximum allowed level, suction will

be automatically blocked by the special safety float. This can also occur when the water in the con-

tainer is very dirty. In these cases, there is an increase in the motor rpm and after 10 seconds the ap-

pliance automatically pauses; the suction speed lights (8C) and the suction light (8E) flash. When this

occurs, the water must be replaced in the container.

Turn off the appliance and only restart it when the level of the water in the container has been re-

stored as described in the chapter “Emptying and cleaning the dirt container.”

Any immediate restarting when the appliance has gone into pause mode can damage the air outlet

filter.

SWITCHING ON

NOTE

Level 1 curtains

Level 2 sofas and cushions

Level 3 carpets

Level 4 bare floors or to clean up liquids

HOW TO USE: SUCTION

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 46

LECOASPIRA PROGRAM

ENGLISH

♦ Turn on the boiler using the UP (4) key.

♦ The two indicators (8B) and (8F) start to flash.

♦ Select the steam pressure desired by pressing the UP (4) key again.

♦ In fact, every time the key is pressed, one of the steam pressure indicators goes on (8B) with a

resulting increase in the pressure of the steam being supplied.

♦ The DOWN (5) key performs the reverse function; in other words, every time the DOWN (5) key

is pressed there is a decrease in the steam pressure and the indicators go off (8B).

STEAM ADJUSTMENT

♦ After setting the level desired, wait until the indicators (8B) remain lit. This means that the pres-

sure of the steam corresponds to the one actually selected and the appliance is ready to be

used.

♦ Press the button (A5) on the handle to dispense steam over the surface to be cleaned.

♦ This turns the indicator light (8D) on.

♦ To stop the steam flow, simply release the button (A5).

The handle of the flexible hose (A2) is fitted with a safety button (A3) to prevent the acci-

dental activation of steam delivery by children or people who do not know how it works. Should the

appliance be left momentarily unguarded, move the safety button (A3) to the off position. To con-

tinue steam delivery, move the switch back to its original position.

When first operating it, there may be some drops of water mixed with the steam due to

imperfect thermal stabilization. We therefore recommend that the first jet of steam be directed onto

a rag.

You can use the steam and suction features at the same time, by activating them both as descri-

bed in the preceding paragraphs.

Strong steam 4 indicators lit to remove scale, stains, grease and sanitise

Normal steam

2 or 3

indicators lit

for carpets, rugs, glass, floors

Gentle steam 1 indicator on

to steam plants, clean delicate fabrics, wall coverings, sofas,

etc.

HOW TO USE: STEAM

HOW TO USE: STEAM + SUCTION

NOTE

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 47

LECOASPIRA PROGRAM

ENGLISH

♦ The programmed mode allows you to choose from 4 preset cleaning programmes.

♦ Every programme is developed to automatically dispense, in sequence, the amount of steam

and suction power necessary to clean a specific surface.

♦ In programmes that envisage the use of the two functions, steam and suction, the suction fun-

ction starts automatically after the steam function and lasts in proportion to that of the steam,

enabling the surface treated to dry.

♦ The times that steam and suction are supplied have been carefully calibrated for various types of

surfaces and have been developed on surfaces with standard dimensions.

♦ When cleaning very large areas, at the end of the cycle it is possible to immediately restart the

programme by simply pressing the A5 key in order to complete the cleaning of the entire surface.

♦ Otherwise it is possible to finish the job in manual mode (see paragraph SET THE SUCTION LE-

VEL IN MANUAL MODE for the suction function or paragraph SET THE STEAM LEVEL IN MA-

NUAL MODE for the steam function).

If using with a programme, remember that the suction speed and the quantity of steam are

reset and therefore it is not possible to adjust them manually.

PRE-SET PROGRAMMES

NOTE

MANUAL PROGRAMME

RUGS/CARPETS

PARQUET / TERRACOTTA

UPHOLSTERY/WALL COVERINGS/CAR INTERIORS

SUCTION

HOW TO USE: PROGRAMMED

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 48

LECOASPIRA PROGRAM

ENGLISH

♦ To select a pre-set programme, press the SET key (3).

♦ When the indicator (8A) starts to flash, it is possible to select the desired programme with the UP

(4) and DOWN (5) keys.

♦ Press the OK (2) key to confirm the selection.

The boiler turns on automatically in the 1 to 3 programmes. Wait until the indicator (8B)

stay lit. This means that the steam pressure corresponds to the one necessary to use the pre-set

programme. The appliance is now ready to be used.

It will only be necessary to press the steam button (A5), except for the P0 programme which is suc-

tion only and starts by pressing the suction button (A4).

Based on the programme selected, there will be an alternating sequence of steam and suction.

In order to guarantee the maximum safety of the user, European Regulation 60335-2-54

envisages that the supply of steam must occur in a voluntary manner. Because of this, when the

programmes described were developed, it was not possible to automate the steam supply function.

PROGRAMME P1 - Rugs, Carpets

This programme combines steam and suction to wash, vacuum and sanitise rugs and carpets.

♦ Set the P1 programme described in the paragraph “Pre-set programmes”.

♦ Holding the steam button (A5) down, steam is supplied

♦ When releasing the button (A5) or after a maximum of 150 seconds, the suction starts automati-

cally to dry the treated surface.

♦ Suction stops automatically after a period of time in proportion to the time the steam was sup-

plied.

♦ If you need to restart the programme to complete cleaning the entire surface, just press the but-

ton (A5) again.

PROGRAMME P2 - Parquet / Terracotta

This programme is specifically for cleaning parquet and delicate floors. The function involves the

combined action of a delicate intermittent flow of steam with adequate suction force. Delicate sur-

faces must always be cleaned using the special parquet cloth (O3) provided, fitted onto the univer-

sal brush (C) (Fig. D).

♦ Set the P2 programme described in the paragraph “Pre-set programmes”.

♦ Holding the steam button (A5) down intermittent steam is supplied and at the same time suction

starts.

♦ Release the button (A5) to stop the steam flow, while suction will continue for a few seconds more

to dry the surface treated.

♦ If you need to restart the programme to complete cleaning the entire surface, just press the but-

ton (A5) again.

Please pay careful attention when cleaning wooden surfaces and treated terracotta floo-

ring with steam as prolonged use of steam may damage the wax, polish or colour of the surfaces

to be cleaned. We therefore recommend dispensing steam on these surfaces only for short periods

of time and suggest always using a cloth, avoiding direct steam being dispensed onto the surface.

In the case of old or particularly delicate floors, clean with cloth steamed previously, without dispen-

sing steam directly on the surface.

Before steaming surfaces, we recommend vacuuming up any hair or dust, using the

vacuum only.

NOTE

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 49

Page is loading ...

Polti Vaporetto Lecoaspira Program Owner's manual

Brand: Polti

Model: Vaporetto Lecoaspira Program

Category: Steam cleaners

Type: Owner's manual

This manual is also suitable for

Lecoaspira Program

Download PDF

report

Polti Vaporetto Lecoaspira Program Owner's manual

This manual is also suitable for

Polti Vaporetto Lecoaspira Program Owner's manual

Related papers

Other documents