KYOCERA KM-4035 User manual

Category
Software
Type
User manual
Legal Notes
Unauthorized reproduction of all or part of this guide is prohibited.
The information in this guide is subject to change without notice.
We cannot be held liable for any problems arising from the use of this product, regardless of the information herein.
Regarding Trademarks
Microsoft Windows and Internet Explorer are registered trademarks of Microsoft Corporation in the U.S. and/or other
countries.
All other brand and product names herein are registered trademarks or trademarks of their respective companies.
Examples of the operations given in this guide support the Microsoft Windows Server 2008 R2 printing environment.
Essentially the same operations are used for Microsoft Windows XP, Vista, and Windows 7 environments.
© 2011 KYOCERA MITA Corporation
Table of Contents
Chapter 1 Login and Consoles
KMnet Admin Login ....................................................................................................................... 1-1
Starting and Logging In ........................................................................................................... 1-1
Log Off ..................................................................................................................................... 1-1
Consoles ....................................................................................................................................... 1-2
Choosing a Console ................................................................................................................ 1-2
Changing the Default Console ................................................................................................. 1-2
Chapter 2 Administration
Roles and Users ............................................................................................................................ 2-1
Adding a Role .......................................................................................................................... 2-1
Adding a User .......................................................................................................................... 2-1
User Properties ............................................................................................................................. 2-2
Changing the Password .......................................................................................................... 2-2
Subscriptions ................................................................................................................................ 2-2
Adding an Alert Subscription ................................................................................................... 2-3
Adding a Report Subscription .................................................................................................. 2-3
Copying or Moving a Subscription ........................................................................................... 2-4
Networks and Agents .................................................................................................................... 2-4
Adding Networks ..................................................................................................................... 2-4
Deleting a Network .................................................................................................................. 2-7
Network Properties .................................................................................................................. 2-7
Start/Stop Discovery ................................................................................................................ 2-8
USB Connections .......................................................................................................................... 2-8
Manage Installation Packages ...................................................................................................... 2-8
Uploading Installation Packages ............................................................................................. 2-8
Upgrading an Agent ................................................................................................................. 2-9
Mail Server .................................................................................................................................... 2-9
Selecting E-mail Settings ......................................................................................................... 2-9
Device Communication ............................................................................................................... 2-10
Database ..................................................................................................................................... 2-10
Backing Up a Database ......................................................................................................... 2-10
Restoring a Database ............................................................................................................ 2-11
Web Server ................................................................................................................................. 2-11
Log View ..................................................................................................................................... 2-11
Creating a Log File ................................................................................................................ 2-12
Selecting Log File Storage .................................................................................................... 2-12
Scheduled Jobs .......................................................................................................................... 2-12
Chapter 3 Device Manager
Manage Groups ............................................................................................................................ 3-1
Add Group ............................................................................................................................... 3-1
Dynamic Groups ...................................................................................................................... 3-1
Manual Groups ........................................................................................................................ 3-2
Preferences ................................................................................................................................... 3-3
KMnet Admin 3.0 i
Polling Defaults ....................................................................................................................... 3-3
Alert Configuration ................................................................................................................... 3-4
Custom Properties ................................................................................................................... 3-4
List View ........................................................................................................................................ 3-5
User Preferences .................................................................................................................... 3-5
Global Characteristics ............................................................................................................. 3-5
Saving Changes ...................................................................................................................... 3-6
Scrolling and Resizing the Window ......................................................................................... 3-6
Set Rows per Page .................................................................................................................. 3-6
Edit Default List Views ............................................................................................................. 3-6
Add Tab ................................................................................................................................... 3-7
Import Default Tab ................................................................................................................... 3-7
Edit Tab ................................................................................................................................... 3-8
Deleting a Tab ......................................................................................................................... 3-9
Map View ...................................................................................................................................... 3-9
Map View Toolbar .................................................................................................................... 3-9
Map Background ................................................................................................................... 3-10
Selecting Icon Properties ....................................................................................................... 3-11
Links ...................................................................................................................................... 3-12
Saving Map Settings .............................................................................................................. 3-13
View Subscriptions ...................................................................................................................... 3-13
Adding Devices ........................................................................................................................... 3-14
Refresh ....................................................................................................................................... 3-14
Select All ..................................................................................................................................... 3-14
Open Device Home Page ........................................................................................................... 3-14
Status Filter ................................................................................................................................. 3-14
Setting a Status Filter ............................................................................................................ 3-15
Show or Hide Unmanaged Devices ....................................................................................... 3-15
Multi-Set ...................................................................................................................................... 3-15
Multi-Set Installation .............................................................................................................. 3-15
Configuring Selected Devices ............................................................................................... 3-16
Multi-Set Log File ................................................................................................................... 3-16
Firmware Upgrade ...................................................................................................................... 3-17
Risks and Recovery Options ................................................................................................. 3-17
Upgrading the Firmware ....................................................................................................... 3-18
Send Data ................................................................................................................................... 3-20
Sending Data by TCP or IPPS ............................................................................................... 3-20
Device Properties ........................................................................................................................ 3-20
Displaying Device Properties ................................................................................................. 3-20
Manage Reports ......................................................................................................................... 3-22
Creating a Device Manager Report ....................................................................................... 3-22
Editing Device IDs and Device Properties ............................................................................. 3-23
Selecting a Report Template ................................................................................................. 3-23
Create Report Subscriptions ................................................................................................. 3-24
Search ......................................................................................................................................... 3-24
Searching for Printing Devices .............................................................................................. 3-25
Chapter 4 Multi-Set Template Editor
Creating New Settings .................................................................................................................. 4-1
Editing a Multi-Set Template ......................................................................................................... 4-1
Multi-Set Template Options ........................................................................................................... 4-2
ii User Guide
1 Login and Consoles
KMnet Admin is a Web-based application that is opened with Microsoft Internet
Explorer. You are required to log on to the application with a User name and
Password.
KMnet Admin Login
On the login page, you can use the following default login credentials:
Administrator
User name: admin
Password: admin
Read-only user
User name: guest
Password: guest
For greater security, we recommend changing the default passwords
immediately after the first login.
Note: To prevent the browser from freezing, do not use the keyboard shortcut
Ctrl+N to open a new window while the application is running.
Starting and Logging In
You can start KMnet Admin from Internet Explorer 7 or later.
1
In the browser, click the application’s address in Favorites or history, or type
the address in the format: http://<computer name>:7478/kmnetadmin/
2
On the login page, type the User name and Password.
3
Choose a console to open:
Open the default console
The default console is displayed. You can later change the console to set as
the default.
Choose a console to open
Click this option, then choose a console from the list.
4
Click Log in.
Log Off
To log off from the application, in the navigation area, click Switch Console,
then select Log off.
A user is automatically logged off if the software is not used for 30 minutes.
KMnet Admin 3.0 1-1
Login and Consoles
Consoles
You can choose a console when logging on to KMnet Admin, and you can
change to a different console at any time.
If you select Choose a console to open when logging on, the console you
select from the list is displayed.
The available consoles are:
Administration
A console for managing user accounts/roles, network/agent discovery, and
system settings.
Device Manager
A console for managing device data, polling, alerts, and preferences.
Choosing a Console
You can change to a different console at any time.
1
In any console, click Switch Console.
2
Select the desired console from the list.
Changing the Default Console
If you select Open the default console and log on, your preferred console is
displayed.
To change the default console:
1
Log on to KMnet Admin.
2
In the navigation area, click Switch Console, then select a console.
3
After the console has loaded, click Switch Console again and click Set As
Default Console.
1-2 User Guide
2 Administration
The Administration console lets you manage roles and users, set properties
and subscription views, and change network and discovery options. In this
console, e-mail settings, database backup schedules and the device
communication can be selected.
Your firewall must be properly configured to use these functions.
Roles and Users
The navigation area lists all roles and the users that belong to each role. There
are several default roles and users created when the application is first installed.
These default roles are Administrators, Assistant Administrators, Help
Desk, Subscribers, and Read-only. The properties for the Administrators
role are unavailable and cannot be edited. All default roles can be renamed
except for Administrators and Subscribers. Privileges define what activities
each role is permitted. Privileges for all roles can be edited, except for the
Administrators role. The default users are Administrator and Guest.
There are different sets of privileges for each default role. The Administrators
role is assigned all privileges by default. These privileges include options to edit
Administration and Device Manager consoles.
Adding a Role
You can add new roles to the existing default roles.
1
In the navigation area, select a role or user.
2
Click the Add role icon.
3
In the Add role dialog box, type a Role name for the new role. Do not use
invisible Unicode or extended ASCII characters. The name must be unique.
4
For Based on, you can select a default role to base this new role on, or select
None. If you select an existing role, the Privileges for that role are displayed
below. You can modify these privileges for the new role you are adding.
5
Select the privileges to assign to the new role. Click the arrows next to the
check boxes under Privileges to expand the list for more options.
6
Click OK to finish adding the role.
You can delete any role except Administrators and Subscribers by selecting
the role, then clicking the Delete role icon.
Adding a User
You can add a new user.
KMnet Admin 3.0 2-1
Administration
1
In the navigation area, select a role or user.
2
Click the Add user icon.
3
In the Add user dialog box, under Select user type, select Login user or
Subscribers (for receiving alerts and reports only).
Administrators can set privileges, a login name, and contact information.
The contact information is used for alert and report subscriptions by e-mail.
4
Under Required Properties, enter information as defined by user type and
required by alerts. Do not use invisible Unicode or extended ASCII characters.
5
Under Optional Properties, enter optional user information.
6
Click OK.
User Properties
User Properties displays and sets details about the user. You can view and
edit properties, change a password, and delete or disable an account. An
administrator or user must be selected in the navigation area.
Changing the Password
An administrator or user can change the password used to log on to the
application.
1
Select an administrator or user in the navigation area.
2
Select User properties.
3
Click Change password.
4
Type the new password, and type again to confirm.
5
Click OK.
Subscriptions
Subscriptions can be created for groups, and child groups inherit subscriptions
from parent groups. Inheritance is only available for dynamic groups, and not
for manual groups. A dynamic group is a device group established by user-
defined device filters.
In the Alert Sets area, inherited subscriptions are shown in gray, and the parent
group from which the subscription is inherited is shown in parenthesis.
Alert e-mails can be sent to any user. The application allows Subscribers, as
well as Administrators and Help Desk users. Subscribers do not have access
to the application, but can receive e-mail alerts.
Reports are created in the Device Manager console. Subscriptions to reports
can be created in the Administration or Device Manager consoles.
2-2 User Guide
Administration
Note: If pop-up blockers are enabled in your browser, Add Alert
Subscription, Add Report Subscription, Manage Reports, the About page,
and Help will not open.
Adding an Alert Subscription
You can manage alert subscriptions.
1
In the navigation area, select a user.
2
Select the User subscriptions icon in the toolbar.
3
Click the Add Alert Subscription icon.
4
In the Create Alert Subscription dialog box, under Groups, select a group of
devices.
5
Under Alert Sets, select the device status alerts.
6
Under Destinations, select at least one e-mail address. Alerts can be sent to
no more than two e-mail addresses.
7
Click OK.
To make changes to the subscription, select it and click the Edit Subscription
icon.
To delete a subscription, select it and click the Delete Subscription icon.
Adding a Report Subscription
You can add a report subscription.
1
In the navigation area, select a user.
2
Select the User subscriptions icon in the toolbar.
3
Click the Add Report Subscription icon.
4
In the Create Report Subscription dialog box, in the Groups area, select a
group of devices.
5
Under Reports, select from the reports list.
6
Select the file format for the report: PDF, HTML, XML, and CSV. File format
options are limited for some reports.
7
Under Destinations, select at least one e-mail address. Reports can be sent to
no more than two e-mail addresses.
KMnet Admin 3.0 2-3
Administration
8
Under Schedule, select an interval for receiving the subscription e-mail: Daily,
Weekly, Monthly, Quarterly, or Yearly.
9
Click OK.
To make changes to the subscription, select it and click the Edit Subscription
icon.
To delete a subscription, select it and click the Delete Subscription icon.
Copying or Moving a Subscription
Subscriptions can be copied or moved to another user's list of subscriptions.
1
In the navigation area, select a user.
2
Click the User subscriptions icon in the toolbar.
3
Under Alerts or Reports, select the subscription, and then click the Copy
subscription or Move subscription icon.
4
In the Copy subscription or Move subscription dialog box, select the
recipient of the subscription, then click OK.
Networks and Agents
Networks and Agents lets you create printing system networks on both IPv4
and IPv6. (IPv4 is the default selection.) Properties can be displayed for the
selected network, and discovery of printing devices can be started or stopped
for one or more networks. Once multiple networks have been added, the Select
All button lets you remove or change the discovery mode for all networks at
once.
For remote agents, install the agent remotely and save the agent details on the
server. Once installed and registered, the remote agent can be reused for other
networks and appears in the Add Network wizard. Network discovery is started
through the assigned agent.
To ensure secure communication, the time setting must be no more than 1
minute apart on server and agent computers. For computers in different time
zones, use a global time server or domain time server to ensure synchronized
time settings.
Adding Networks
The Add Network wizard provides a quick method for adding new networks.
1
In the navigation area, select Preferences > Networks and agents.
2
Click the Add Network icon.
3
In the Add Network wizard dialog box, type an alias for the network. If the Alias
text box is left blank, the network IP address is used as the alias. If the
application server is multihomed, you can choose and name a local network.
2-4 User Guide
Administration
4
Type the Domain. This text box is available only if the Device Communication
option in the Administration console is set to Device IP addresses are
volatile and may change. When the device is first discovered, the network
domain is applied to the domain of the device.
5
Type the address for the IPv4 or IPv6 network.
Adding an IPv4 Network
You can add an IPv4 network. Editing the network address or subnet mask may
create an orphan device.
1
Type the IPv4 network IP Address. You can edit this field for all networks
except the local network, or local networks if the server is multihomed.
2
Select the Subnet Mask from the list. Devices belong to a network based on the
network range, not on the subnet of the device. For example, if the network
address is 10.10.8.0, then 255.255.252.0 will contain any device with an IP
address from 10.10.8.1 through 10.10.11.254. If you add a network address of
10.10.9.0 and a subnet mask of 255.255.255.0, then devices from 10.10.9.1
through 10.10.9.254 will appear on both networks.
3
Click Next to proceed to the Select an Agent page.
Adding an IPv6 Network
You can add an IPv6 network. IPv6 options are not available if the IPv6 protocol
is disabled or not supported on the server. Specify as much of the specific
address and prefix as necessary to discover your device. The application uses a
one-by-one discovery method for IPv6 addresses.
For example, in prefix 64 networks, to discover a device with the network
address fd80:39f0:a2ae:82a:0:0:0:0150, it is sufficient to type the address as
fd80:39f0:a2ae:82a:0:0:0:0100, and select 120 as the prefix. The discovery
process will cover the range of the following addresses, and the device will be
added:
Start IP: fd80:39f0:a2ae:82a:0:0:0:0100
End IP: fd80:39f0:a2ae:82a:0:0:0:01FF
1
Type the IPv6 network IP Address, for example,
fd80:39f0:a2ae:82a:0:0:0:0100.
2
Select the Prefix for the network address. The prefix is an analog of the IPv4
subnet mask. Prefixes in the list range from 112 to 127. The default selection is
120.
For example, prefix 120 is selected. The first 120 bits then defines the subnet
mask of the network. (Prefix 120 is the same as the
ffff::fffff:fffff:fffff:fffff:fffff:ffff:ff00 IPv6 mask.)
3
Click Next to proceed to the Select an Agent page.
Installing an Agent
You can install an agent for the network.
KMnet Admin 3.0 2-5
Administration
1
On the Select an Agent page, select Local Agent, New Agent, or Remote
Agent. Remote Agent appears if it was previously created through New Agent.
Click Next.
2
On the Enter the Agent Details page, enter the required information for the
agent:
For a local agent or remote agent, accept the displayed agent details.
For a new agent, type the agent details.
3
Click Next to proceed to the Enter the Agent Details page.
Specifying SNMP Information
You can select the SNMP settings for the network.
1
In the Enter the SNMP Information page, accept the defaults or type the
number of Retries and the Timeout (seconds) period for communication
between agents and devices. Under SNMP Version, select SNMP v1/2c, or
SNMP v3, or both. Click Next.
2
Depending on the SNMP version chosen in the previous page, select
Communication settings:
Communication settings SNMP v1/2c
Type the Read Community and the Write Community name of the device.
Write Community sets its Write Community value in the application
database when the device is first discovered. Click Next.
Communication settings SNMP v3
Select the desired Security level, Username, and Password. Depending
on the Security level, select from available Hash and Encryption options.
Click Next.
Note: When using an IB-23 network card, support is limited to the DES
privacy option. The password in Network Properties must match the device ’s
SNMP v3 password.
Scheduling Discovery
After adding networks, you can schedule a device discovery.
1
To schedule device discovery, select Schedule automatic device discovery
on this network on the Activate Device Discovery page. Click Next.
2
Select a daily or monthly schedule. For a discovery interval of Days, you can set
up to three scheduled times. The list includes hours only. Click Next.
3
Confirm your selections and click Finish.
The server installs the agent on the remote computer, adds the new network,
assigns the selected agent to the network, and starts discovery through the
assigned agent.
2-6 User Guide
Administration
Deleting a Network
You can delete a network. This does not delete devices.
1
In the navigation area, select Preferences > Networks and agents.
2
Select a network.
3
Click Delete Network.
4
Select Uninstall assigned agent from remote computer, if you wish to
suspend all polling of these devices by all consoles and delete the agent from
the remote computer.
Devices that do not belong to any registered network appear under All Devices
> Networks > Orphan Devices in the Device Manager console.
5
Click OK in the confirmation message.
Network Properties
You can view properties for the selected network by selecting a network from
the Networks and Agents list and clicking the Network Properties icon.
General
On the General tab, you can modify all properties for the selected managed
network except the network address and the subnet mask. If you clear the
Managed check box, click OK to confirm.
When a network is unmanaged:
Discovery is disabled.
You cannot modify any network property except for the alias.
You may create orphan devices.
Note: Devices that do not belong to any registered network will appear in the
All Devices\Networks\Orphan Devices folder.
Agent
The agent status is displayed as Connected or Not Connected.
For Local Agent, you can only change the Agent Timeout.
For Remote Agent, you can change any property except Status.
You can create a new agent by selecting New Agent and entering all
properties.
When there is no direct connection to a remote device, select Use Proxy
function to open Device Home Pages.
SNMP v1/v2c v3
Select the SNMP v1/v2c v3 tab to view and modify the SNMP options for the
selected network.
Discovery
Select the Discovery tab to view and modify the device discovery schedules for
the selected network.
KMnet Admin 3.0 2-7
Administration
Start/Stop Discovery
The Start Discovery icon is available on all tabs when you select a single
network or multiple managed networks. Discovery is a process for scanning a
network for IP addresses of network printers to identify what devices are
currently on the network. This function is independent from the discovery
selection in Network Properties, whether you select to enable or disable
discovery.
Start Discovery
Available when discovery is not in progress on any of the selected networks.
Stop Discovery
Available when discovery is in progress on any of the selected networks.
USB Connections
The Local Device Agent (LDA) discovers and manages USB-supported
Kyocera devices that are locally connected. USB connections require KMnet
Admin installed and operating on the server. TCP port numbers 9000 and 9072
should be free and not blocked by a firewall. Windows XP SP3 or later with
.NET Framework 3.5 must be installed.
USB devices are displayed in the device list along with network-connected
devices.
Manage Installation Packages
You can view installation packages and upload available packages. Current
installation packages are displayed at the top of the Upgrade view.
Current versions
Displays the application and Local Agent versions.
Currently installed packages
Displays the Agent installation package, Agent version, Model update
package, and Model support version that are currently installed.
Under Available installation packages, you can upload, remove, and upgrade
installation packages.
Uploading Installation Packages
You can upload installation and update packages from the server and add them
to the Available installation packages list.
1
In the navigation area, select Preferences > Upgrade.
2
Click Upload package.
3
Browse to a valid file name with an extension of .ZIP or .KMNALU.
4
Click OK to upload the file.
You can remove an installation package by selecting it from the list and clicking
Remove package.
2-8 User Guide
Administration
Upgrading an Agent
You can upgrade an agent in the Available installation packages list.
1
In the navigation area, select Preferences > Upgrade.
2
Click Upload package.
3
Browse for a valid upgrade file with an extension of .ZIP or .KMNALU.
4
Click OK to upload the file.
5
Select an agent from the Available installation packages list and click
Upgrade.
Current agent information is displayed. Click Next.
If the latest version is installed, a message appears. Click Close.
6
On the Authorization page, select an option for User login and Password.
Click Next.
7
If Use user login, password and domain from the KMnet Admin server was
selected, click Next.
If Manually enter user login, password and domain for each agent was
selected, type User Login, Password, and Domain for each agent.
If Manually enter the same user login, password and domain for all agents
was selected, type User Login, Password, and Domain for all agents.
Click Next.
8
On the Confirmation page, click Upgrade.
Mail Server
KMnet Admin communicates with a mail server to send e-mail alerts and
information to system administrators and subscribers.
SMTP Server
Defines an SMTP server for sending notifications. This information must be
complete and correct for e-mail notifications to work. If alert e-mail fails to
arrive, check your antivirus software. Adding port 25 or java.exe to the
exception list in your antivirus software may resolve the issue.
Authentication
Specifies the User name and Password, if SMTP authentication is required.
E-mail setup
When alerts and status e-mails are sent out, the address entered in Sender
address will appear in the e-mail address line.
Selecting E-mail Settings
You can select settings for e-mail alerts and information to system
administrators and subscribers.
KMnet Admin 3.0 2-9
Administration
1
In the navigation area, select Preferences > Mail server.
2
Under SMTP Server, enter the server name and port number.
3
Under Authentication, enter the User name and Password, when a SMTP
server connection is required.
4
Under E-mail setup, enter the sender's e-mail address.
5
Click Test Email to make sure the e-mail feature works. In the Test Email
dialog box, enter the recipient's e-mail address, and click OK. A test e-mail will
be sent to the designated recipient.
6
Click Apply to save the e-mail settings, or click Reset to clear the settings.
Device Communication
Device Communication uses Host Name and Domain name, if entered.
Choose from a static or volatile IP address.
For DHCP, select Device IP addresses are volatile and may change. If this
option is chosen, communication with the devices is established by using the
host name rather than the IP address.
Note: After the Device Communication Mode is changed, KMnet Admin
will not work until after the next discovery. We strongly recommend changing
Device Communication Mode only at a time when the network is not in use.
Database
KMnet Admin database backup compresses files into a zip file and saves it to a
folder called C:\KMnetAdminBackup. The system administrator can schedule a
single backup, immediate or recurring backups.
Backing Up a Database
You can run a database backup from the Administration console.
1
In the navigation area, select Preferences > Database backup.
2
Select the time and interval for the backup:
Immediate
The backup starts immediately.
Single Backup in
Select the interval in minutes or hours.
Recurring
Select Monthly, Weekly, or Daily, and select the Day and Time.
3
Click Apply.
2-10 User Guide
Administration
Restoring a Database
You can restore KMnet information from a database backup. This restore uses
a backup file (.ZIP) in the default backup location C:\KMnetAdminBackup, or in
another user-specified backup location.
1
In the Administration console, click Preferences > Database restore.
2
Select a backup file from the list, click the Start Restore Process icon, then
click OK.
3
To restore a database from a previous KMnet Admin version or from a file
located outside the default backup location, click the Upload Backup File icon.
4
Browse for a valid backup file (.ZIP), select it and click Open then click OK.
To change the name of a backup file, select it from the list, click the Rename
Backup File icon, and type the new name.
To remove a backup file from the list, select it, click Delete Backup File, and
click OK to confirm.
To save a copy of a backup file, click Download Backup File, click Save, select
a location, and click Save.
To change the location of the backup folder, click Backup Folder Path, type a
new path, and click OK.
Web Server
You can choose the server protocol setting. The setting is applied the next time
the application is started.
HTTP
Faster than HTTPS, it is a client/server Internet protocol used by browsers to
transfer hypertext requests, which control the formatting and transmission of
messages.
The HTTP port number is 7478.
HTTPS
More secure than HTTP, it is encrypted and uses a different port. It creates a
secure channel over an unsecured network.
The HTTPS port number is 7443.
Note: When using HTTPS, the server name must not be longer than 15
characters.
Log View
Log View lets you track and view the activities of various KMnet Admin
operations. Log files can be created for maintenance tasks such as replacing
toner. Once created, the log files can be saved for a maximum of three months.
The log file default location is C:\Program Files\Kyocera\KMnet Admin\log.
Log files can be created for the following operations:
Database backup
KMnet Admin 3.0 2-11
Administration
Database restore
Multi-Set
Send Data
Firmware Upgrade
Agents Upgrade
Model Support Update
The privilege to view and edit log files is determined by role. For example, the
Administrator role can view and edit all log files, the Help Desk role can view
and edit their own log files, and the Read-only role cannot view or edit log files.
Creating a Log File
You can create log files for various KMnet Admin operations.
1
In the navigation area, select Preferences > Log view.
2
Click the Create Log File icon.
3
Type the Operation Name, or click Select from list and select from the list.
4
Type the Device Serial Number.
5
Type information about the task in Log file content.
6
Click OK.
The default location for log files is C:\Program Files\Kyocera\KMnet Admin\log.
To edit a log file, select it from the Log view list and click the Edit Log File icon.
To delete a log file manually, select it from the Log view list, click the Delete
Log File icon, and then click OK.
Selecting Log File Storage
You can choose how long log files are stored on your system after they are
created. Available options are 1 week, 1 month, and 3 months.
1
In the navigation area, select Preferences > Log view.
2
Click the Log File Storage Settings icon.
3
Select the desired time period in the Storage period list.
4
Click OK.
Scheduled Jobs
Some KMnet Admin tasks can be scheduled to run at selected intervals and
appear in the Scheduled Jobs view. The supported tasks include:
Network Discovery
2-12 User Guide
Administration
Set in the Add Network wizard in the Administration console.
Database Backup
Set in the Administration console.
Multi-Set
Set in the Multi-Set wizard in the Device Manager console.
Firmware Upgrade
Set in the Firmware Upgrade wizard in the Device Manager console.
To view scheduled jobs, in the navigation area, select Preferences >
Scheduled jobs.
To change the name and schedule details of a scheduled job, select it and click
Edit Scheduled Job.
To delete a scheduled job, select it and click Delete Scheduled Job.
KMnet Admin 3.0 2-13
3 Device Manager
Device Manager lets you access local device settings and monitor the status of
multiple devices connected locally or through a network. It lets you create
groups of devices, install firmware on a device or group of devices, display
devices and properties in a list or on an office map, and send configuration
parameters to multiple devices. You can also create reports for all device-
related activities, and export a list of devices and their properties to a file.
Manage Groups
You can create groups of devices so that you can view and modify them
together. Once a group is created, you can revise group settings, delete a
group, or convert a dynamic group to a manual group. Groups is located in the
navigation area toolbar. Two additional features are available:
Upgrade firmware
A guided method for installing the most current printer or engine firmware on
devices.
Send data
Lets you send files, text or device commands directly to one or more
selected devices.
Add Group
Use Add group to add a manual or dynamic device group to the Device
Manager console. You must add devices to a manual group whereas a dynamic
group adds devices automatically. Add group is located in the navigation area
under Groups.
A dynamic group cannot have a manual group as a child. If any subnode of
Networks is selected, Add group is unavailable.
Dynamic Groups
A dynamic group is a device group established by user-defined device filters
which select and add relevant devices to the dynamic group. Subscriptions can
be inherited and can be created for groups. Child groups inherit subscriptions
from parent groups. Inheritance is only available for dynamic groups, and not for
manual groups.
Device Filters
Device filters determine the characteristics of a dynamic group. Setting device
filters in the Add Dynamic Group dialog box lets you include only those
devices that match a particular set of criteria. You can collapse or expand a
device filter group at any time by clicking the icon to the right of the group
heading.
Adding a Dynamic Group
You can create a dynamic group.
3-1 User Guide
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47

KYOCERA KM-4035 User manual

Category
Software
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI