Bionaire BAP1300 Owner's manual

Bionaire
Brand
Bionaire
Model
BAP1300
Category
Small kitchen appliances
Type
Owner's manual

This manual is also suitable for

QUIETech
TM
HEPA Air Cleaners
MODEL BAP1175/BAP1300
Read instructions before operating. Retain for future reference.
Instruction Leaflet
INFO-LINE
If after having read this leaflet, you have any
questions or comments on your air cleaner,
call 1-800-788-5350 in North America
☎
428-0171
AIR CLEANER SAFETY
PLEASE READ AND SAVE
THESE IMPORTANT SAFETY
INSTRUCTIONS.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
1. Read all instructions before using the appliance.
2. To avoid fire or shock hazard, plug the appliance directly
into a 120V AC electrical outlet.
3. Remove plastic bag over filter before use.
4. Keep the cord out of heavy traffic areas. To avoid fire haz-
ard, NEVER put the cord under rugs, near heat registers,
radiator, stoves, or heaters.
5. To protect against electrical hazards, DO NOT immerse
in water or other liquids. Do not use near water.
6. Close supervision is necessary when any appliance
is used by or near children, or by disabled people.
7. Always unplug the air cleaner before moving it, opening
the grill, changing filters, cleaning, or whenever the air cleaner
is not in use. Be sure to pull by the plug and not the cord.
8. NEVER drop, pour or insert any object or liquids into
any openings.
9. DO NOT operate any appliance with a damaged cord or
plug, if motor fan fails to rotate, after the appliance malfunc-
tions, or if it has been dropped or damaged in any manner.
Return appliance to manufacturer for examination, electrical
or mechanical adjustment, or repair.
10.Use appliance only for intended household use as described
in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to
persons. The use of attachments not recommended or
sold by Bionaire
®
may cause hazards.
11.DO NOT use outdoors.
12.NEVER block the air openings or place on a soft surface
such as a bed or sofa, as this could cause the unit to tip
over, blocking the air intake opening.
3
13. Keep unit away from heated surfaces and open flames.
14. DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit, doing so will void your
warranty. The inside of the unit contains no user serviceable
parts. All servicing should be performed by qualified
personnel only.
15. Do not use the air cleaner where combustible gases
or vapors are present.
16. A loose fit between the plug and the AC outlet (receptacle)
may cause overheating and a distortion of the plug. Contact
a qualified electrician to replace loose or worn outlets.
17. Do not sit, stand, or place heavy objects on the air cleaner.
18. WARNING: To reduce risk of fire or electrical shock,
DO NOT use this air cleaner with any solid-state speed
control device.
19. Do not let the power cord hang over the edge of table,
counter, or near hot surfaces.
PLEASE SAVE
THESE INSTRUCTIONS.
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
CONSUMER SAFETY INFORMATION
The length of the cord used on this product was selected
to reduce the hazards of becoming tangled in, or tripping
over a longer cord. If a longer cord is necessary an approved
extension cord may be used.
THIS PRODUCT IS EQUIPPED WITH A POLARIZED
AC (Alternating Current)PLUG (a plug
having one blade wider than the other). This plug
will fit into the power outlet only one way. If the
plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact qualified
personnel to install the proper outlet.
DO NOT DEFEAT THE SAFETY PURPOSE OF THIS
POLARIZED PLUG IN ANY WAY.
2
AIR CLEANER SAFETY
PLEASE READ AND SAVE
THESE IMPORTANT SAFETY
INSTRUCTIONS.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
1. Read all instructions before using the appliance.
2. To avoid fire or shock hazard, plug the appliance directly
into a 120V AC electrical outlet.
3. Remove plastic bag over filter before use.
4. Keep the cord out of heavy traffic areas. To avoid fire haz-
ard, NEVER put the cord under rugs, near heat registers,
radiator, stoves, or heaters.
5. To protect against electrical hazards, DO NOT immerse
in water or other liquids. Do not use near water.
6. Close supervision is necessary when any appliance
is used by or near children, or by disabled people.
7. Always unplug the air cleaner before moving it, opening
the grill, changing filters, cleaning, or whenever the air cleaner
is not in use. Be sure to pull by the plug and not the cord.
8. NEVER drop, pour or insert any object or liquids into
any openings.
9. DO NOT operate any appliance with a damaged cord or
plug, if motor fan fails to rotate, after the appliance malfunc-
tions, or if it has been dropped or damaged in any manner.
Return appliance to manufacturer for examination, electrical
or mechanical adjustment, or repair.
10.Use appliance only for intended household use as described
in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to
persons. The use of attachments not recommended or
sold by Bionaire
®
may cause hazards.
11.DO NOT use outdoors.
12.NEVER block the air openings or place on a soft surface
such as a bed or sofa, as this could cause the unit to tip
over, blocking the air intake opening.
3
13. Keep unit away from heated surfaces and open flames.
14. DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit, doing so will void your
warranty. The inside of the unit contains no user serviceable
parts. All servicing should be performed by qualified
personnel only.
15. Do not use the air cleaner where combustible gases
or vapors are present.
16. A loose fit between the plug and the AC outlet (receptacle)
may cause overheating and a distortion of the plug. Contact
a qualified electrician to replace loose or worn outlets.
17. Do not sit, stand, or place heavy objects on the air cleaner.
18. WARNING: To reduce risk of fire or electrical shock,
DO NOT use this air cleaner with any solid-state speed
control device.
19. Do not let the power cord hang over the edge of table,
counter, or near hot surfaces.
PLEASE SAVE
THESE INSTRUCTIONS.
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
CONSUMER SAFETY INFORMATION
The length of the cord used on this product was selected
to reduce the hazards of becoming tangled in, or tripping
over a longer cord. If a longer cord is necessary an approved
extension cord may be used.
THIS PRODUCT IS EQUIPPED WITH A POLARIZED
AC (Alternating Current)PLUG (a plug
having one blade wider than the other). This plug
will fit into the power outlet only one way. If the
plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact qualified
personnel to install the proper outlet.
DO NOT DEFEAT THE SAFETY PURPOSE OF THIS
POLARIZED PLUG IN ANY WAY.
2
4
The electrical rating of the extension cord must be equal to
or greater than the rating of the air cleaner minimum SA rating.
Care must be taken to arrange the extension cord where
it cannot be pulled on by children or accidentally tripped over.
Congratulations on your choice of a Bionaire
®
Air
Cleaner. Its quiet operation and versatility make this unit
perfect for your home.
HOW THE QUIETECH™
SYSTEM WORKS.
Your Bionaire
®
Air Cleaner incorporates the latest technology
developments in portable air filtration. QUIETech
™
features
a new HEPA filtration media and a very quiet motor system
which blends in with your lifestyle. Dirty, dust-laden air is
drawn through the front of the QUIETech
™
.
First a Pre-Filter traps larger particles before your air passes
through a 2-stage filtration system. Next, a carbon filter helps
trap odors. Then the HEPA filter removes 99.97% of particulate
as small as 0.3 microns in size, filtering smoke, dust, pollen,
mold spores, and pet dander. Microban
®
product protection has
been added to the HEPA filter to inhibit the growth of odor-
causing bacteria on the filter. This product protection is limited
to the HEPA filter surface.
PRE-OPERATING INSTRUCTIONS
1. When removing the unit from the box, visually check for
shipping damage. Please contact both the shipper and your
dealer immediately if the unit bears any sign of damage from
mishandling. All Bionaire
®
unit are carefully inspected before
leaving our factory.
2. KEEP SHIPPING BOX AND PACKAGING for use in the
unlikely event that your Bionaire
®
unit needs servicing.
If this unit is shipped without the original packaging,
damage could occur and void the warranty.
3. WARNING: Check the operating voltage shown
on the back of the unit. Do not operate at voltages
other than shown.
4. Select a location for your air cleaner. The slim profile
of the QUIETech
™
allows you to place the unit against
the wall. Do not place front grill toward the wall,
or air outlet grill directly under an overhanging object.
5. Open the front grill by depressing the
door tab to expose the inside of the air
cleaner (Figure 1).
6. Check to make sure that the pre-filter
is in place inside the door. If not, see
"Filter Replacement".
7. Next, remove the HEPA filters from
inside of air cleaner. Locate carbon
filters packed separately in box. Remove
any plastic wrapping (dispose of plastic
wrapping), and slide a carbon filter
underneath the tabs on the HEPA filter
frame. Repeat with each HEPA
filter assembly (Figure 2).
8. Re-install the HEPA filters on the filter
guide posts (Figure 3).
9. Close the door until it snaps in place.
If for any reason, the door is not sealed
properly, the Door Ajar indicator will
appear on the control panel to indicate that the door is not
closed. It is important to maintain a proper door seal to
achieve maximum filtration.
☛
Tip: If the door is not closed properly and Door Ajar is lit,
the air cleaner will not operate.
OPERATING INSTRUCTIONS
1. Plug the power cord into
a 120V AC electrical outlet.
2. Turn the unit on by pushing
the power button.
3. Select the desired operating
speed – High, Medium, Low, or Sleep by touching the but-
tons on the control panel (Figure 4). For optimal performance,
it is recommended that you run the air cleaner continuously on
the highest setting initially, then switch to the medium, low or
sleep setting depending on your preference.
FILTER REPLACEMENT
To keep your unit operating at peak effectiveness, your HEPA filter
should be changed at a minimum of every 12 months and your
carbon filter should be replaced every 3 months. Always unplug
the appliance before moving it, opening the grill, changing filter,
or cleaning.
5
Figure 3
Figure 2
HIGH
FILTER LIFE
REMAINING
MED
SLEEP
DOOR
AJAR
CHANGE
FILTER
LOW
Power
High
Medium
Sleep
Low
Sensor
Nightlight
Figure
4
Figure 1
4
The electrical rating of the extension cord must be equal to
or greater than the rating of the air cleaner minimum SA rating.
Care must be taken to arrange the extension cord where
it cannot be pulled on by children or accidentally tripped over.
Congratulations on your choice of a Bionaire
®
Air
Cleaner. Its quiet operation and versatility make this unit
perfect for your home.
HOW THE QUIETECH™
SYSTEM WORKS.
Your Bionaire
®
Air Cleaner incorporates the latest technology
developments in portable air filtration. QUIETech
™
features
a new HEPA filtration media and a very quiet motor system
which blends in with your lifestyle. Dirty, dust-laden air is
drawn through the front of the QUIETech
™
.
First a Pre-Filter traps larger particles before your air passes
through a 2-stage filtration system. Next, a carbon filter helps
trap odors. Then the HEPA filter removes 99.97% of particulate
as small as 0.3 microns in size, filtering smoke, dust, pollen,
mold spores, and pet dander. Microban
®
product protection has
been added to the HEPA filter to inhibit the growth of odor-
causing bacteria on the filter. This product protection is limited
to the HEPA filter surface.
PRE-OPERATING INSTRUCTIONS
1. When removing the unit from the box, visually check for
shipping damage. Please contact both the shipper and your
dealer immediately if the unit bears any sign of damage from
mishandling. All Bionaire
®
unit are carefully inspected before
leaving our factory.
2. KEEP SHIPPING BOX AND PACKAGING for use in the
unlikely event that your Bionaire
®
unit needs servicing.
If this unit is shipped without the original packaging,
damage could occur and void the warranty.
3. WARNING: Check the operating voltage shown
on the back of the unit. Do not operate at voltages
other than shown.
4. Select a location for your air cleaner. The slim profile
of the QUIETech
™
allows you to place the unit against
the wall. Do not place front grill toward the wall,
or air outlet grill directly under an overhanging object.
5. Open the front grill by depressing the
door tab to expose the inside of the air
cleaner (Figure 1).
6. Check to make sure that the pre-filter
is in place inside the door. If not, see
"Filter Replacement".
7. Next, remove the HEPA filters from
inside of air cleaner. Locate carbon
filters packed separately in box. Remove
any plastic wrapping (dispose of plastic
wrapping), and slide a carbon filter
underneath the tabs on the HEPA filter
frame. Repeat with each HEPA
filter assembly (Figure 2).
8. Re-install the HEPA filters on the filter
guide posts (Figure 3).
9. Close the door until it snaps in place.
If for any reason, the door is not sealed
properly, the Door Ajar indicator will
appear on the control panel to indicate that the door is not
closed. It is important to maintain a proper door seal to
achieve maximum filtration.
☛
Tip: If the door is not closed properly and Door Ajar is lit,
the air cleaner will not operate.
OPERATING INSTRUCTIONS
1. Plug the power cord into
a 120V AC electrical outlet.
2. Turn the unit on by pushing
the power button.
3. Select the desired operating
speed – High, Medium, Low, or Sleep by touching the but-
tons on the control panel (Figure 4). For optimal performance,
it is recommended that you run the air cleaner continuously on
the highest setting initially, then switch to the medium, low or
sleep setting depending on your preference.
FILTER REPLACEMENT
To keep your unit operating at peak effectiveness, your HEPA filter
should be changed at a minimum of every 12 months and your
carbon filter should be replaced every 3 months. Always unplug
the appliance before moving it, opening the grill, changing filter,
or cleaning.
5
Figure 3
Figure 2
HIGH
FILTER LIFE
REMAINING
MED
SLEEP
DOOR
AJAR
CHANGE
FILTER
LOW
Power
High
Medium
Sleep
Low
Sensor
Nightlight
Figure
4
Figure 1
6 7
Pre-Filter
The foam pre-filter inside the door
collects larger particles and preserves the
life of the HEPA filter. The pre-filter should
be washed every month for optimum per-
formance.
Pre-Filter removal and installation
procedure:
1. Turn off and unplug your air cleaner.
2. Open the front door as in
Pre-Operating Instructions (Figure 1).
3. Depress thumb tabs on pre-filter
frame (Figure 5), pull frame towards
you (Figure 6).
4. Carefully remove pre-filter from
frame hooks (Figure 7).
5. Gently hand wash pre-filter with
warm water and a mild detergent.
Allow pre-filter to dry completely before
reinstalling in the air cleaner. Do not
wash in clothes washing machine or
dishwasher. Do not use abrasives
or chemicals to clean.
6. To re-install, depress foam pre-filter over each frame hook until
it catches on the hook. Make sure that all hooks are secured
over pre-filter before returning frame to air cleaner (Figure 7).
7. Insert pre-filter frame tabs into door of air cleaner.
8. Swing frame towards door and press thumb tabs into place.
9. Close and lock the door in place.
Carbon Filter
Carbon filters, which help clean and freshen the air, should be
replaced every three months, or when odor removal effectiveness
is noticeably reduced. DO NOT wash the carbon filters. To
install, see Pre-Operating Instructions.
HEPA Filter
Your digital Filter Monitor will tell you when to replace your
HEPA filter by indicating the remaining filter life as a percentage.
Your filter will most likely last up to 12 months, depending on
usage and indoor air conditions.
When you turn on your air cleaner, it may take up to 60
seconds for the Filter Monitor to begin to read the filter life.
☛
TIP: It is normal for the Filter Monitor to read
at slightly different levels from last use when re-started.
When the filter life remaining is approximately 10%, the Change
Filter symbol on the digital control panel will appear. When the fil-
ter life remaining is at 0%, you should change your HEPA filters.
DO NOT wash the HEPA filters.
HEPA filter replacement procedure:
1. Turn off and unplug your air cleaner.
2. Open the front door.
3. Slide the HEPA filter assemblies off of
the posts.
4. To replace the HEPA filter assembly,
slide the hang tabs onto the guide post
and slide backwards. Press the filter in
to ensure a tight fit (Figure 8).
5. Repeat this procedure for each filter assembly (BAP1175
for two filters and BAP1300 for four filters) and shut the door.
Reset the Filter Monitor after changing the HEPA filters by
simultaneously pressing the power and sleep buttons on
the control panel.
Replacement Filter Models
BAP1175 PreFilter (1 pack) Model 1235P
BAP1300 PreFilter (1 pack) Model 1236P
Carbon Filter (4 pack) Model A1260C
HEPA Filter (2 pack) Model A1230H
To order replacement filters, please call 1-800-253-2764
or visit our website at www.bionaire.com for more information.
NIGHTLIGHT INSTRUCTIONS
The QUIETech
™
HEPA air cleaners are equipped
with a nightlight which illuminates the LCD screen in a dark
room. The nightlight operates on a sensor and will illuminate
when the room becomes dark. When the room becomes light,
the nightlight feature will automatically turn off.
To de-activate the nightlight, simply press the light button on
the control panel. This will de-activate the nightlight feature.
Figure 6
Figure 5
Figure 7
Fig 8
6 7
Pre-Filter
The foam pre-filter inside the door
collects larger particles and preserves the
life of the HEPA filter. The pre-filter should
be washed every month for optimum per-
formance.
Pre-Filter removal and installation
procedure:
1. Turn off and unplug your air cleaner.
2. Open the front door as in
Pre-Operating Instructions (Figure 1).
3. Depress thumb tabs on pre-filter
frame (Figure 5), pull frame towards
you (Figure 6).
4. Carefully remove pre-filter from
frame hooks (Figure 7).
5. Gently hand wash pre-filter with
warm water and a mild detergent.
Allow pre-filter to dry completely before
reinstalling in the air cleaner. Do not
wash in clothes washing machine or
dishwasher. Do not use abrasives
or chemicals to clean.
6. To re-install, depress foam pre-filter over each frame hook until
it catches on the hook. Make sure that all hooks are secured
over pre-filter before returning frame to air cleaner (Figure 7).
7. Insert pre-filter frame tabs into door of air cleaner.
8. Swing frame towards door and press thumb tabs into place.
9. Close and lock the door in place.
Carbon Filter
Carbon filters, which help clean and freshen the air, should be
replaced every three months, or when odor removal effectiveness
is noticeably reduced. DO NOT wash the carbon filters. To
install, see Pre-Operating Instructions.
HEPA Filter
Your digital Filter Monitor will tell you when to replace your
HEPA filter by indicating the remaining filter life as a percentage.
Your filter will most likely last up to 12 months, depending on
usage and indoor air conditions.
When you turn on your air cleaner, it may take up to 60
seconds for the Filter Monitor to begin to read the filter life.
☛
TIP: It is normal for the Filter Monitor to read
at slightly different levels from last use when re-started.
When the filter life remaining is approximately 10%, the Change
Filter symbol on the digital control panel will appear. When the fil-
ter life remaining is at 0%, you should change your HEPA filters.
DO NOT wash the HEPA filters.
HEPA filter replacement procedure:
1. Turn off and unplug your air cleaner.
2. Open the front door.
3. Slide the HEPA filter assemblies off of
the posts.
4. To replace the HEPA filter assembly,
slide the hang tabs onto the guide post
and slide backwards. Press the filter in
to ensure a tight fit (Figure 8).
5. Repeat this procedure for each filter assembly (BAP1175
for two filters and BAP1300 for four filters) and shut the door.
Reset the Filter Monitor after changing the HEPA filters by
simultaneously pressing the power and sleep buttons on
the control panel.
Replacement Filter Models
BAP1175 PreFilter (1 pack) Model 1235P
BAP1300 PreFilter (1 pack) Model 1236P
Carbon Filter (4 pack) Model A1260C
HEPA Filter (2 pack) Model A1230H
To order replacement filters, please call 1-800-788-5350.
or visit our website at www.bionaire.com for more information.
NIGHTLIGHT INSTRUCTIONS
The QUIETech
™
HEPA air cleaners are equipped
with a nightlight which illuminates the LCD screen in a dark
room. The nightlight operates on a sensor and will illuminate
when the room becomes dark. When the room becomes light,
the nightlight feature will automatically turn off.
To de-activate the nightlight, simply press the light button on
the control panel. This will de-activate the nightlight feature.
Figure 6
Figure 5
Figure 7
Fig 8
8 9
To re-activate the nightlight feature, simply press the light
button again.
Remote Control (BAP1300 only)
Model BAP1300 comes with a remote control handset.
The product can be operated with the remote control handset or
by the manual touchpad on the product. The remote control
handset requires two "AAA" batteries which are included for
your convenience. There are five buttons on the remote
control – Power and 4 speed settings.
MAINTENANCE INSTRUCTIONS
1. Before cleaning make sure the unit is switched off
and unplugged.
2. Carefully wipe the unit with a soft, damp cloth with a
non-abrasive cleaner. Treated with care, your Bionaire
®
air
cleaner will retain its attractive appearance for many years.
Over time dust may accumulate on the front grill.
This can be removed by wiping with a damp cloth.
AIR CLEANER TROUBLESHOOTING GUIDE
Problem Solution
☛
Unit will not operate ✔ Check that the unit is plugged and the electrical
outlet or circuit breaker is working.
✔ Make sure the unit is on by pressing the power button.
✔ If the door is ajar the unit will not operate. Make sure
the filters are properly installed and firmly close the door.
✔ If the door has been open then you will need to select a
speed after the door has been closed.
☛
Display screen is blank ✔ Press power button.
☛
Decreased air flow ✔ If Digital Filter Monitor is indicating low performance,
change the HEPA filter. For replacement filters call
1-800-788-5350 or visit www.bionaire.com.
✔ If digital filter monitor is below 10%, the carbon
filter may need to be changed.
✔ Wash the Pre-filter.
✔ Make sure nothing is blocking air inlet.
☛
Night light does not work ✔ Make sure room is dark.
✔ To check, place thumb over sensor.
☛
Night light always on ✔ Push the button.
✔ Clean sensor.
✔ Sensor may be blocked.
STORAGE
1. Clean the product and remove all filters.
2. Store in a cool dry location.
SERVICE INSTRUCTIONS
1. Do NOT attempt to repair or adjust any electrical
or mechanical functions on this unit. Doing so will void
the warranty. The inside of the unit contains no user
serviceable parts. All servicing should be performed
by qualified personnel only.
2. If you need to exchange the unit, please return it in its
original carton, with a sales receipt, to the store where you
purchased it. If you are returning the unit more than
30 days after the date of purchase, please see the
enclosed warranty.
3. Should your air cleaner require service please call
1-800-253-2764.
4.
*
If you have any other questions or comments,
feel free to write to us:
PO Box 400
Milford, MA 01757
USA
Canada
6385 Shawson Drive
Mississauga, Ontario
Canada, L5T 1S7
Visit our website at www.bionaire.com
8 9
To re-activate the nightlight feature, simply press the light
button again.
Remote Control (BAP1300 only)
Model BAP1300 comes with a remote control handset.
The product can be operated with the remote control handset or
by the manual touchpad on the product. The remote control
handset requires two "AAA" batteries which are included for
your convenience. There are five buttons on the remote
control – Power and 4 speed settings.
MAINTENANCE INSTRUCTIONS
1. Before cleaning make sure the unit is switched off
and unplugged.
2. Carefully wipe the unit with a soft, damp cloth with a
non-abrasive cleaner. Treated with care, your Bionaire
®
air
cleaner will retain its attractive appearance for many years.
Over time dust may accumulate on the front grill.
This can be removed by wiping with a damp cloth.
AIR CLEANER TROUBLESHOOTING GUIDE
Problem Solution
☛
Unit will not operate ✔ Check that the unit is plugged and the electrical
outlet or circuit breaker is working.
✔ Make sure the unit is on by pressing the power button.
✔ If the door is ajar the unit will not operate. Make sure
the filters are properly installed and firmly close the door.
✔ If the door has been open then you will need to select a
speed after the door has been closed.
☛
Display screen is blank ✔ Press power button.
☛
Decreased air flow ✔ If Digital Filter Monitor is indicating low performance,
change the HEPA filter. For replacement filters call
1-800-253-2764 or visit www.bionaire.com.
✔ If digital filter monitor is below 10%, the carbon
filter may need to be changed.
✔ Wash the Pre-filter.
✔ Make sure nothing is blocking air inlet.
☛
Night light does not work ✔ Make sure room is dark.
✔ To check, place thumb over sensor.
☛
Night light always on ✔ Push the button.
✔ Clean sensor.
✔ Sensor may be blocked.
STORAGE
1. Clean the product and remove all filters.
2. Store in a cool dry location.
SERVICE INSTRUCTIONS
1. Do NOT attempt to repair or adjust any electrical
or mechanical functions on this unit. Doing so will void
the warranty. The inside of the unit contains no user
serviceable parts. All servicing should be performed
by qualified personnel only.
2. If you need to exchange the unit, please return it in its
original carton, with a sales receipt, to the store where you
purchased it. If you are returning the unit more than
30 days after the date of purchase, please see the
enclosed warranty.
3. Should your air cleaner require service please call
1-800-788-5350.
4.
*
If you have any other questions or comments,
feel free to write to us:
PO Box 400
Milford, MA 01757
USA
Canada
6385 Shawson Drive
Mississauga, Ontario
Canada, L5T 1S7
Visit our website at www.bionaire.com
10
TWO (2) YEAR FULL WARRANTY
Bionaire
®
warrants for TWO (2) YEARS from the date of original
purchase, to repair or, if repairs are not commercially applicable
to replace without charge (parts and labor), any supplied or
manufactured part of this air cleaner which, upon inspection by
an authorized service center, proves to have failed in normal use
due to defects in material or workmanship, or, at its option, to
replace the unit. If the product can not be reasonably repaired
the consumer may elect a free replacement or refund.
Operations under conditions other than those recommended
or at voltages other than the voltage indicated on the unit,
or any attempts by unauthorized personnel to service the
unit or modify it, will render the guarantee void.
Bionaire
®
shall not be liable for any personal injury, property
damage or any incidental or consequential damages of any kind
(including water damage), resulting from defects, malfunctions,
misuse, improper installation or alteration of the product.
BIONAIRE
®
EXPRESSLY DISCLAIMS ALL
RESPONSIBILITY FOR CONSEQUENTIAL
DAMAGES OR INCIDENTAL LOSSES FOR BREACH
OF EXPRESS OR IMPLIED WARRANTIES CAUSED
BY USE OF THIS PRODUCT. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGE.
The provisions of this warranty are in addition to, and not a
modification of, or subtraction from the statutory warranties and
other rights and remedies contained in any applicable legislation
and to the extent that any such provision purports to disclaim,
exclude or limit any such statutory warranties or other rights or
remedies, such provisions shall be deemed to be amended to
the extent necessary to comply therewith.
For Warranty Service, please call 1-800-788-5350.
A Bionaire
®
consumer service representative will help determine
which is the best procedure in order for your air cleaner to
be repaired.
KEEP THIS NUMBER FOR FUTURE REFERENCE.
QUIETech
TM
HEPA Air Cleaners
MODEL BAP1175/BAP1300
Read instructions before operating. Retain for future reference.
Instruction Leaflet
INFO-LINE
If after having read this leaflet, you have any
questions or comments on your air cleaner,
call 1-800-253-2764 in North America
☎
428-0171
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Bionaire BAP1300 Owner's manual

Bionaire
Brand
Bionaire
Model
BAP1300
Category
Small kitchen appliances
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents