LG 37LC2R User manual

Category
Plasma TVs
Type
User manual

This manual is also suitable for

PP//NNOO:: 3388228899UU00002255HH ((00770055--RREEVV0055))
32LC2R
**
/37LC2R
**
42PC1R
**
42LC2R
**
50PC1R
**
32LB1R
**
/37LB1R
**
50PC3R
**
42LB1R
**
/47LB1R
**
PPlleeaassee rreeaadd IInnffoorrmmaattiioonn
M
aannuuaall iinncclluuddeedd
ttooggeetthheerr bbeeffoorree rreeaaddiinngg tthhiiss mmaannuuaall aanndd ooppeerr--
aattiinngg yyoouurr sseett..
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require service.
LCD TV
LCD TV MODELS PLASMA TV MODELS
PLASMA TV
OWNER’s MANUAL
32LC2R
**
/37LC2R
**
42PC1R
**
42LC2R
**
50PC1R
**
32LB1R
**
/37LB1R
**
50PC3R
**
42LB1R
**
/47LB1R
**
¥d§v Æd«¡… œ∞Oq «∞LFKu±U‹ «∞Ld≠o Æ∂q Æd«¡… ≥c« «∞b∞Oq Ë¢AGOq «∞πNU“.
Eç æ^LXZ¿Öç vó ¿ÇÜ_L}FÑ.
|á EL_RñÑ Õ|á ÖèÀïÑ ¿ÇRåAŒ ‡Õ|á Ö_É_Ñ ¿ÇRåAŒ ‡Qåé dâr ¿ÇRåAŒ.
pâZÖA KULA» ÇÉeñAàé, ¡àn\ ¿ÇÜÉe~ ¿ÇÜ\v~ pÉò ¿ÇtkA ¿ÇXÉwò ‡|á ECpkA ¿ÇÜqÉèÖA∆ ¿ÇÜZ‡àé
pÉñç ÇÉFAôr.
úLñG ¿æÕaAÀ¿∆ ÇÉÜAÇÅ
¢KHU“ DCL
©d«“«‹ √§Ne… «∞∑KOHe¥uÊ
«∞LeËœ… °AU®W DCL
©d«“«‹ √§Ne… «∞∑KOHe¥uÊ «∞LeËœ…
°AU®W °ö“±U
¢KHU“ AMSALP
1
ACCESSORIES
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the product.
Owner's Manual
Owner’s Manual
Batteries
Power Cord
2-Wall brackets
2-eye-bolts
2-bolts for stand assembly
(Refer p.13)
This feature is not available
for all models.
2-TV brackets
2-Wall brackets
2-bolts
4-bolts for stand assembly
(Refer p.14)
3322LLCC22RR
**
oonnllyy
Twister Holder
Arrange the wires
with the twister holder.
Cable
Management
Twister Holder
Arrange the wires
with the twister holder.
FFoorr 4422PPCC11RR
**
,, 5500PPCC11RR
**
,, 5500PPCC33RR
**
FFoorr 3322LLCC22RR
**
,, 3377LLCC22RR
**
,, 4422LLCC22RR
** ,,
3322LLBB11RR
**
,, 3377LLBB11RR
**
,, 4422LLBB11RR
**
,, 4477LLBB11RR
**
FFoorr 3322LLCC22RRWW,, 3377LLCC22RRWW,, 4422LLCC22RRWW
OK
INPUT
TVTV
INPUT
PIP PR- PIP PR+
SWAP
PIP INPUT
DVD
ARC
EXIT
VOL
TIME
REVEAL
INDEX
Q.VIEW
MUTE
PR
SLEEP
LIST
I/II
MENU
TEXT PIP SIZE
POSTION
VCR
POWER
123
456
789
*
0
FAV
?
Remote Control
* Slightly wipe stained spot on the exterior only with
the cleansing cloths for the product exterior if
there is stain or fingerprint on surface of the exterior.
Do not wipe roughly when removing stain. Please
be cautious of that excessive power may cause
scratch or discoloration.
Polishing Cloth
Polish the screen with the cloth
This feature is not available
for all models.
CONTENTS
2
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
INTRODUCTION
Controls / Connection Options . . . . . . . . . . . . . . . . . . . . . . . .
4-10
Remote Control Key Functions/
Installing Batteries
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11-12
TV MENU
On Screen Menus Selection and Adjustment . . . . .36
SSeettttiinngg uupp TTVV ssttaattiioonnss
Auto programme tuning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37
Manual programme tuning
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
38
Fine tuning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Assigning a station name
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40
Booster (Option)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Programme edit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Favourite programme
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
43
Calling the programme table
. . . . . . . . . . . . . . . . . . . . . . . .
44
PPiiccttuurree MMeennuu OOppttiioonnss
PSM (Picture Status Memory)
. . . . . . . . . . . . . . . . . . . . . .45
Picture Adjustment (PSM-User option)
. . . . . . . . .46
CSM (Colour Status Memory)
. . . . . . . . . . . . . . . . . . . . . .47
Manual Colour Temperature Control
(CSM - User option)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
ADVANCED
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Reset
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
SSoouunndd MMeennuu OOppttiioonnss
SSM (Sound Status Memory)
. . . . . . . . . . . . . . . . . . . . . . .52
Sound Frequency Adjustment
(SSM - User option)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
AVL (Auto Volume Leveler)
. . . . . . . . . . . . . . . . . . . . . . . . . . .54
Balance Adjustment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Speaker
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Stereo/Dual Reception
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
NICAM Reception
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Speaker Sound Output Selection
. . . . . . . . . . . . . . . . . .57
TTiimmee MMeennuu OOppttiioonnss
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
On/Off Time
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Auto Sleep
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Sleep Timer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
SSppeecciiaall MMeennuu OOppttiioonnss
Child Lock
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
ISM (Image Sticking Minimization) Method
. . .62
Low Power
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
XD Demo
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
INSTALLATION
Unfolding The Base Stand
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Stand Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Basic Connection /
How to Remove the Cable Management
. . . . . . . . . . .15-16
How to join the product assembly to the wall
to protect the set tumbling
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
CONNECTIONS & SETUP
Antenna Connection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
VCR SETUP/
EXTERNAL EQUIPMENT CONNECTIONS
. . . .20-21
DVD SETUP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23
STB(SET-TOP BOX) SETUP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
PC SETUP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-28
TURNING THE TV ON
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
SPECIAL FUNCTIONS
PPIIPP ((PPiiccttuurree--IInn--PPiiccttuurree)) // DDoouubbllee WWiinnddooww // PPOOPP
Watching PIP/Double Window/POP
. . . . . . . . . . . . . .30
Programme Selection for Sub Picture
. . . . . . . . . . . .30
Input Source Selection for Sub Picture
. . . . . . . . . .31
Sub Picture Size Adjustment (PIP mode only)31
Moving the Sub Picture (PIP mode only)
. . . . . . .31
Adjusting PIP Transparency (PIP mode only)
. .31
Swapping between main and sub pictures
. . . . . .32
POP
(Picture-out-of-Picture: Programme Scan)
. . . . .32
TTeelleetteexxtt
Switch on/off
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
SIMPLE Text
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
TOP Text
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
FASTEXT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Special Teletext Functions
. . . . . . . . . . . . . . . . . . . . . . . . . . . .35
CONTENTS
3
CONTENTS
TV MENU
SSccrreeeenn MMeennuu OOppttiioonnss
Auto Configure (RGB [PC] mode only)
. . . . . . . . . . . .64
Manual Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Setting the Picture Format . . . . . . . . . . . . . . . . . . . . . .66-67
Selecting Wide VGA/XGA/UXGA mode . . . . . . . .68
Initializing
(Reset to original factory settings) . . . . . . . . . . . . . . . .
68
APPENDIX
External Control Device Setup
. . . . . . . . . . . . . . . . . . . . . .
69-75
IR Codes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
76
Remote control ir codes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
77
Programming the Remote
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
78
Programming code
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
79-80
Troubleshooting Checklist
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
81-82
Maintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
83
Product Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
83-
85
4
INTRODUCTION
CONTROLS
INTRODUCTION
This manual explains the features available on the
4422PPCC11RR
**
,
5500PPCC11RR
**
TVs.
â– 
This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
â– 
If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth.
Front Panel Controls
PR
VOL
OK
MENU
INPUT
PROGRAMME Buttons
VOLUME Buttons
MENU Button
OK Button
INPUT Button
POWER Button
PR
VOL
OK
MENU
INPUT
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is
switched on.
PR
VOL
OK
MENU
INPUT
5
INTRODUCTION
This manual explains the features available on the
5500PPCC33RR
**
TVs.
â– 
This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
â– 
If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth.
Front Panel Controls
PRPR
VOLOL
OKOK
MENUMENU
INPUTINPUT
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is switched on.
PROGRAMME Buttons
VOLUME Buttons
OK Button
MENU Button
INPUT Button
POWER Button
6
INTRODUCTION
CONNECTION OPTION
INTRODUCTION
AV IN 2V IN 2
L/MONO
R
AUDIOAUDIO
VIDEOVIDEO
VIDEOVIDEO
AUDIOAUDIO
COMPONENTCOMPONENT IN
RS-232C INRS-232C IN
(CONTROL
&
SERVICE)
ANTENNA
IN
VARIABLEARIABLE
AUDIO OUT
2
1
AV OUTV OUT
CONTROL IN
REMOTE
RGB INRGB IN
RGB
(PC/DTV)(PC/DTV)
AUDIO
(RGB/DVI)
VIDEOVIDEO
S-VIDEOS-VIDEO
MONO
( )
AUDIOAUDIO
AV IN 1V IN 1
AC IN
HDMI/DVI INHDMI/DVI IN
This is the back panel of models
4422PPCC11RR
**
,
5500PPCC11RR
**
,
5500PPCC33RR
**
TVs.
Back Connection Panel
AUDIO Input
Connections are available for listening
stereo sound from an external device.
VIDEO Input
Connects the video signal from a video
device.
Remote Control Port
RGB/Audio Input
Connect the monitor output from a PC/DTV to
the appropriate input port.
AV OUT
Connect the second TV or monitor to the
AV OUT socket on the set.
Variable Audio Output
Connect an external amplifier or add a sub
woofer to your surround sound system.
Power Cord Socket
This the set operates on an AC power. The volt-
age is indicated on the Specifications page.
Never attempt to operate the set on DC power.
HDMI/DVI Input
Connect a HDMI signal to HDMI/DVI IN.
Connect DVI(VIDEO) signal to HDMI/DVI port
with DVI to HDMI cable.
RS-232C Input
(CONTROL&SERVICE)Port
Connect the serial port of the control devices
to the RS-232C jack.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
Antenna Input
1
2
3
4
5
6
7
8
9
10
11
21 4 53
7 8 9
10 11
6
7
INTRODUCTION
CONTROLS
This manual explains the features available on the
3322LLCC22RR
**
,
3377LLCC22RR
**
,
4422LLCC22RR
**
TVs.
â– 
This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
â– 
If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth.
Front Panel
PR
VOL
OK
MENU
INPUT
R
/I
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is switched on.
PROGRAMME Buttons
VOLUME Buttons
OK Button
MENU Button
INPUT Button
POWER Button
Side Panel
â– 
This feature is not available for all models.
8
INTRODUCTION
INTRODUCTION
CONTROLS
This manual explains the features available on the
3322LLBB11RR
**
,
3377LLBB11RR
**
,
4422LLBB11RR
**
,
4477LLBB11RR
**
TVs.
â– 
This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
â– 
If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth.
Front Panel Controls
INPUT MENU OK VOL PR
RGB
PCPC
INPUT Button
VOLUME
Buttons
Remote Control
Sensor
PROGRAMME
Buttons
MENU Button
OK Button
POWER Button
TV mode
AV 1-2 mode
RGB mode
HDMI mode
Component 1-2 mode
Intelligent eye
Power/Standby Indicator
(
rr
)
• illuminates red in standby mode.
• illuminates white when the set is
switched on.
Index
Intelligent eye
INTRODUCTION
9
CONNECTION OPTION
AV IN 2V IN 2
AUDIOAUDIOVIDEOVIDEO
L/MONO
R
AC IN
AV IN 2V IN 2
L/MONO
R
AUDIOAUDIO
VIDEOVIDEO
AC IN
VIDEOVIDEO
AUDIOAUDIO
COMPONENT INAV OUT
AV IN 1
VIDEOVIDEO
S-VIDEOS-VIDEO
(MONO)
AUDIOAUDIO
2
1
VARIABLEARIABLE
AUDIO OUT
RS-232C INRS-232C IN
(CONTROL
&
SERVICE)
HDMI/DVI INHDMI/DVI IN
RGB INRGB IN
RGB
(PC/DTV)(PC/DTV)
AUDIO
(RGB/DVI)
CONTROL
IN
REMOTE
ANTENNA
IN
This is the back panel of models
3322LLCC22RR
**
,
3377LLCC22RR
**
,
4422LLCC22RR
**
TVs.
Back Connection Panel
AUDIO Input
Connections are available for listening
stereo sound from an external device.
VIDEO Input
Connects the video signal from a video
device.
37LC2R
**
42LC2R
**
32LC2R
**
1 2 3 4
5 6 7 8
11
9
10
Power Cord Socket
This the set operates on an AC power. The volt-
age is indicated on the Specifications page.
Never attempt to operate the set on DC power.
RGB/Audio Input
Connect the monitor output from a PC/DTV to
the appropriate input port.
AV OUT
Connect the second TV or monitor to the
AV OUT socket on the set.
Variable Audio Output
Connect an external amplifier or add a sub
woofer to your surround sound system.
Remote Control Port
HDMI/DVI Input
Connect a HDMI signal to HDMI/DVI IN.
Connect DVI(VIDEO) signal to HDMI/DVI port
with DVI to HDMI cable.
RS-232C Input
(CONTROL&SERVICE)Port
Connect the serial port of the control devices
to the RS-232C jack.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
Antenna Input
1
2
3
4
5
6
7
8
9
10
11
10
INTRODUCTION
CONNECTION OPTION
INTRODUCTION
S-VIDEO
VIDEO
AUDIO
L/MONO
R
S-VIDEO
VIDEO
AUDIO
L/MONO
R
AV IN 2
AV IN 2
HDMI/DVI IN
REMOTE
CONTROL
IN
(CONTROL & SERVICE)
RS-232C IN
RGB IN
AUDIO
(RGB/DVI)
RGB
(PC/DTV)
AV OUT
ANTENNA
IN
S-VIDEO
AV IN 1
R
L
(MONO)
COMPONENT IN
R
L
2
1
PB PR
Y
LR
This is the back panel of models
3322LLBB11RR
**
,
3377LLBB11RR
**
,
4422LLBB11RR
**
,
4477LLBB11RR
**
TVs.
Back Connection Panel
AUDIO Input
Connections are available for listening
stereo sound from an external device.
VIDEO Input
Connects the video signal from a video
device.
32LB1R
**
37/42/47LB1R
**
1 432
5 6 7 8 9
10 11
RGB/Audio Input
Connect the monitor output from a PC/DTV to
the appropriate input port.
AV OUT
Connect the second TV or monitor to the
AV OUT socket on the set.
Component Input
Connect a component video/audio device to
these jacks.
Variable Audio Output
Connect an external amplifier or add a sub
woofer to your surround sound system.
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
Remote Control Port
HDMI/DVI(or HDMI)Input
Connect a HDMI signal to HDMI/DVI IN.
Connect DVI(VIDEO) signal to HDMI/DVI port
with DVI to HDMI cable.
RS-232C Input
(CONTROL&SERVICE)Port
Connect the serial port of the control devices
to the RS-232C jack.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Antenna Input
1
2
3
4
5
6
7
8
9
10
11
RS-232C IN
(CONTROL
&
SERVICE)
ANTENNA
IN
AV 1 AV 2
AUDIO OUT
VARIABLE
RGB IN
VIDEO
AUDIO
COMPONENT IN
AV IN 4
L/MONO
R
AUDIO
VIDEO
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RGB
(PC/DTV)
2
1 (DVI)1 (DVI)
HDMI INHDMI IN
47LB1R
*
only
11
INTRODUCTION
REMOTE CONTROL KEY FUNCTIONS
OK
INPUT
TVTV
INPUT
PIP PR- PIP PR+
SWAP
PIP INPUT
DVD
ARC
EXIT
VOL
TIME
REVEAL
INDEX
Q.VIEW
MUTE
PR
SLEEP
LIST
I/II
MENU
TEXT PIP SIZE
POSTION
VCR
POWER
123
456
789
*
0
FAV
?
POWER
TV INPUT
INPUT
ARC
Brightness
adjustment
PIP
SIZE
POSITION
PIP PR - /+
SWAP
PIP INPUT
Coloured
buttons
VCR/DVD
control buttons
EXIT
LIST
MENU
I/II
SLEEP
Switches the set on from standby or off to standby.
Returns from AV1, AV2, Component1,Component2,
RGB, HDMI/DVI(HDMI1/DVI or HDM2) to the TV
mode.
Switches the set on from standby.
If you press the button once, the input source OSD will
appear on screen. Press the
DD
/
EE
button and then
OOKK
but-
ton to select the desired input source (
TV, AV 1 , AV 2 ,
Component1, Component2, RGB, HDMI/DVI
(HDMI1/DVI or HDM2)).
Switches the set on from standby.
Selects your desired picture format.
Adjusts screen brightness.
It returns to the default settings brightness by changing
mode source.
Switches the sub picture PIP, DW, POP (except 47LB1R
*
) or off mode.
Adjusts the sub picture size.
Moves the sub picture.
Selects a programme for the sub picture.
Exchanges the main/sub images in PIP/Double window/POP mode.
Selects the input source for the sub picture in PIP/Double
window mode.
These buttons are used for teletext (only
TTEELLEETTEEXXTT
models) or
PPrrooggrraammmmee eeddiitt
.
Controls some video cassette recorders or DVD players
when you have already selected DVD or VCR mode button.
Clears all on-screen displays and returns to TV viewing
from any menu.
Displays the programme table.
Selects a menu.
Selects the sound output.
Sets the sleep timer.
12
INTRODUCTION
INTRODUCTION
REMOTE CONTROL KEY FUNCTIONS
• Open the battery compartment cover on the back side and insert the
batteries with correct polarity.
• Install two 1.5V alkaline batteries of AA type. Don’t mix used batteries
with new batteries.
INSTALLING BATTERIES
OK
INPUT
TVTV
INPUT
PIP PR- PIP PR+
SWAP
PIP INPUT
DVD
ARC
EXIT
VOL
TIME
REVEAL
INDEX
Q.VIEW
MUTE
PR
SLEEP
LIST
I/II
MENU
TEXT PIP SIZE
POSTION
VCR
POWER
123
456
789
*
0
FAV
?
1
1
1
MODE
Selects the remote operating modes.
TELETEXT
BUTTONS
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
THUMBSTICK
(Up/Down/Left
Right)
OK
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
Accepts your selection or displays the current mode.
VOLUME UP
/DOWN
Q.VIEW
MUTE
Programme
UP/DOWN
0~9 number
button
FAV
*
Adjusts the volume.
Returns to the previously viewed programme.
Switches the sound on or off.
Selects available programmes.
Switches the set on from standby.
Selects a programme.
Selects numbered items in a menu.
Switches the set on from standby.
Displays the selected favourite programme.
No function
13
INSTALLATION
INSTALLATION
UNFOLDING THE BASE STAND (42PC1R
*
)
â– 
This feature is not available for all models.
Figures shown here may be slightly different from your set.
WWhheenn cclloossiinngg tthhee ssttaanndd ffoorr ssttoorraaggee
First remove the screws in the holes (B) on the bottom
of the stand. And then pull two Hooks (D) of the stand bottom
and fold the stand into the back of the set.
After folding, push two Locks (A) of the stand bottom outward.
NOTE
!
â– 
Place the set with the screen facing down on a cushion or soft cloth as shown in Figure 1.
Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward.
â– 
Pull the stand out as shown above in Figures 2 ~ 3.
After unfolding the stand, please insert and tighten the screws in the holes (B) on the bottom of the stand.
â– 
When connecting cables to the set, do not disengage the lock (C).
This may cause the set to fall, causing serious bodily injury and serious damage to the set.
A
D
A
C
B
B
1
3 4
2
14
INSTALLATION
INSTALLATION
SWIVEL STAND
(
LCD TV models)
- The TV can be conveniently swiveled on its stand 30° to the left or right to provide the optimum viewing angle.
- This feature is not available for all models.
STAND INSTALLATION (
Only
32LC2R
*
)
1
2
3
Carefully place the product screen side down on
a cushioned surface that will protect product
and screen from damage.
Place the product stand on the product as
shown.
Install the 4 bolts securely, in the back of the
product in the holes provided.
â– 
This feature is not available for all models.
15
INSTALLATION
BASIC CONNECTION (
PLASMA TV models)
Arrange the cables as shown picture.
Hold the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
with both
hands and push it as shown.
Connect the cables as necessary.
To connect an additional equipment, see the
EExxtteerrnnaall eeqquuiippmmeenntt CCoonnnneeccttiioonnss
section.
Reinstall the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
as
shown.
1
2
3
CABLE MANAGEMENT
â– 
These models have two cable arrangement methods according to the stand type.
Stand type 1
Stand type 2
16
INSTALLATION
INSTALLATION
BASIC CONNECTION (
LCD TV models)
(a) - 32LC2R
*.
(b) - 37LC2R
*
,
42LC2R
*
,
32LB1R
*
,
37LB1R
*
,
42LB1R
*
,
47LB1R
*.
Hold the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
with both
hands and pull it upward.
NOTE
!
GG
Do not hold the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
when moving the product.
If the product is dropped, you may be injured or the product may be broken.
HOW TO REMOVE THE CABLE MANAGEMENT (
LCD TV models)
Connect the cables as necessary.
After connecting the cables neatly,
arrange the cables to the Cable Holder.
To connect an additional equipment, see
the
EExxtteerrnnaall eeqquuiippmmeenntt CCoonnnneeccttiioonnss
section.
1
Install the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
as shown.
2
Bundle the cables using the supplied
twister holder.
3
(a)
(a)
(a)
(b)
(b)
(b)
17
INSTALLATION
HOW TO JOIN THE PRODUCT ASSEMBLY TO THE WALL TO
PROTECT THE SET TUMBLING
or
2
1
â– 
Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.
â– 
The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the
product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling
for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure
that children don’t climb on or hang from the product.
Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is
safer to tie the rope so it becomes horizontal between the wall and the product.
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on
the wall. Match the height of the bracket that is mounted on the wall.
NOTE
!
GG
When moving the product to another place undo the ropes first.
GG
Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.
GG
To use the product safely make sure that the height of the bracket that is mounted on the wall is same as
that of the product.
2
3
1
1
3
2
18
INSTALLATION
INSTALLATION
Desktop Pedestal Installation
PR
VOL
OK
MENU
INPUT
For proper ventilation, allow a clearance of 4" on each side and from the wall.
Wall Mount: Horizontal installation
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instruc-
tions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
GGRROOUUNNDDIINNGG
Ensure that you connect the earth ground wire to prevent
possible electric shock. If grounding methods are not possi-
ble, have a qualified electrician install a separate circuit break-
er. Do not try to ground the unit by connecting it to tele-
phone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker
â– 
The TV can be installed in various ways such as on a wall, or on a desktop etc.
â– 
The TV is designed to be mounted horizontally.
<<OOnnllyy 4422PPCC11RR
**
sseerriieess>>
Remove two screws of the backside of the set before
installing the wall mounting bracket.
INSTALLATION
4 inches
4 inches4 inches
4 inches
4 inches
4 inches
4 inches4 inches
4 inches
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

LG 37LC2R User manual

Category
Plasma TVs
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI