ATEN 2X-027G Quick start guide

Category
Rack accessories
Type
Quick start guide

This manual is also suitable for

Rack Mounting Kit 2X-026G/2X-027G
Installation:
Step 3: Screw and secure the front panel to the rack.
Step 1: Screw the mounting brackets to the rack, as shown in the diagram.
Step 2: Slide the unit along the brackets.
2 x Phillips Flat Head M4L6 Screws
2 x Mounting Brackets
The brackets can be screwed to the front or rear sides of the device.
User Instructions
Phillips Flat Head
M4L6 Screw
Rack Mounting Kits (Optional)
Easy Installation Rack
Mount Kit
2X-026G (Short)
2X-027G (Long)
Rack Depth
42 - 70cm
68 - 105cm
Phillips Flat Head Screws
  • Page 1 1

ATEN 2X-027G Quick start guide

Category
Rack accessories
Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI