LG 32LY750H Owner's manual

Category
LED TVs
Type
Owner's manual
OWNER’S MANUAL
LED TV*
Please read this manual carefully before operating your set and retain it
for future reference.
*LG LED TVs are LCD TVs with LED backlighting.
www.lg.com
LW75**
LY75**
LY76**
ENG
ENGLISH
2
TABLE OF CONTENTS
TABLE OF CONTENTS
3 LICENSES
3 OPEN SOURCE SOFTWARE
NOTICE
4 INSTALLATION PROCEDURE
4 ASSEMBLING AND PREPARING
4 Unpacking
8 Separate purchase
9 Parts and Button
10 - Using the Joystick button
11 Lifting and Moving the TV
12 Setting up the TV
12 - Attaching the Stand
15 Mounting on a table
18 Mounting on a wall
20 Tidying cables
21 MAKING CONNECTIONS
21 Antenna Connection
22 Adapter Connection
22 Satellite Dish Connection
22 LED Clock Connection
23 HDMI Connection
24 MHL Connection
24 Speaker Output Setup
25 Network Setup
25 - Wired network Connection
26 Audio Connection
26 - Digital Optical Audio Connection
26 CI module Connection
27 Headphone Connection
27 USB Connection
28 Euro Scart Connection
29 REMOTE CONTROL
31 MAINTENANCE
31 Cleaning your TV
31 - Screen, Frame, Cabinet and Stand
31 - Power Cord
32 TROUBLESHOOTING
33 SPECIFICATIONS
38 IR CODES
39 EXTERNAL CONTROL DEVICE
SETUP
39 RS-232C Setup
39 Type of Connector:
D-Sub 9-Pin Male
40 RS-232C Configurations
41 Communication Parameters
41 Command Reference List
42 Transmission / Receiving Protocol
WARNING
y
If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
y
If you ignore the caution message, you
may be slightly injured or the product may
be damaged.
NOTE
y
The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
ENGENGLISH
3
LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
ABOUT DIVX VIDEO: DivX
®
is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified
®
device that
has passed rigorous testing to verify that it plays DivX video. Visit divx.com for
more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
®
device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete your
registration.
“DivX Certified
®
to play DivX
®
video up to HD 1080p, including premium
content.”
“DivX
®
, DivX Certified
®
and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc. ©
DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
[email protected]. This offer is valid for three (3) years from the date on which you purchased the
product.
ENG
ENGLISH
4
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
NOTE
y
Image shown may differ from your TV.
y
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y
The available menus and options may differ from the input source or product model that you are
using.
y
New features may be added to this TV in the future.
y
The TV can be placed in standby mode in order to reduce the power consumption. And the TV
should be turned off if it will not be watched for some time, as this will reduce energy consumption.
y
The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may
take a few minutes. (Only LY76**)
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
y
Do not use any unapproved items to ensure the safety and product life span.
y
Any damage or injuries caused by using unapproved items are not covered by the warranty.
y
Some models have a thin film attached on to the screen and this must not be removed.
NOTE
y
The items supplied with your product may vary depending on the model.
y
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
y
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
FLASH DRIVE does not fit into your TV’s USB port.
A
B
A
B
*A
<
=
10 mm
*B
<
=
18 mm
ENGENGLISH
5
ASSEMBLING AND PREPARING
(Depending on model)
or
or
FREEZE
RATIO
L/R SELECT
ENTER
BACK
EXIT
Q.MENU
INFO
MENU
CHVOL
P
A
G
E
FAV
3D
MUTE
1 2 3
4 5 6
7 8
0
9
MARK
LIST
FLASHBK
ENERGY
SAVING
TV
AV MODE
INPUT
Remote control, Batteries
(AAA)
(See p. 29, 30)
Owners manual Cable Holder
(Depending on model)
(See p. 20)
ENG
ENGLISH
ENG
ENGLISH
Wall Mount Spacers
2EA
(Only 42LW75**, 42LY75**,
42LY76**)
(See p. 19)
Cable Managements
2EA
(Only LY750*, LY76**)
(See p. 20)
Stand Base
(Only 22LW75**)
(See p. 12)
ENG
ENGLISH
ENG
ENGLISH
ENG
ENGLISH
Stand Screws
4EA, M4 x L20
(Only 32LY750*,
42/47/55LY751*, 32LY76**)
6EA, M4 x L20
(Only 32/39LY751*)
(See p. 12, 13, 14)
Stand Screws
4EA, M4 x L14
(Only 39/42/47/55LY750*,
42/47/55LY751*,
39/42/47/55LY76**)
(See p. 12, 14)
Stand Bases
(Only LY750*, LY76**)
(See p. 12)
Power cord AC-DC Adapter
(See p. 22)
Power Cord/
AC-DC Adapter
(See p. 22)
ENG
ENGLISH
6
INSTALLATION PROCEDURE
or
Cable Holders
4EA
(Only 22/28LW75**)
Cable Managements
2EA
(Only 22/28LW75**)
Isolator
(Depending on model)
(See p. 7)
Stand Base/Stand Body
(Only LY751*)
(See p. 13, 14)
Power Cord Holder/Screw
1EA
(Only 39/42/47/55LY751*)
(See p. 20)
Torx Plus Star-Head
Screws
2EA
(Only LY751*)
(See p. 13, 14)
Screws for Stand Fixing
2EA
(Depending on model)
(See p. 17)
Washers for Stand Fixing
2EA
(Depending on model)
(See p. 17)
Nuts for Stand Fixing
2EA
(Depending on model)
(See p. 17)
Rubbers
2EA
(Only LY751*)
(See p. 15)
ENGENGLISH
7
INSTALLATION PROCEDURE
NOTE
y
Antenna Isolator Installation Guide
- Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.
»
If there is a voltage difference between TV Set and GND of antenna signal, the antenna
contact might be heated and excessive heat might cause an accident.
- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the
wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
- Before starting, be sure that the TV antenna is connected.
ANTENNA/
CABLE IN
Cable / Antenna
Wall
Isolator
1 Connect to TV.
2 Connect to Set-Top box.
or
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a cable
distribution system using coaxial cable, may in some circumstances create a re hazard. Connection
to a cable distribution system has therefore to be provided through a device providing electrical
isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ENG
ENGLISH
8
INSTALLATION PROCEDURE
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
LG Audio Device AN-MR300
Magic Remote
AN-MR500
Magic Remote
LED Clock
LEC-003
Compatibility
LW75** LY75** LY76**
LG Audio Device
AN-MR300
Magic Remote
AN-MR500
Magic Remote
LED Clock
LEC-003
(Only 32/42LW75**)
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
ENGENGLISH
9
INSTALLATION PROCEDURE
Parts and Button
B type : 32/42LW75**, LY750*, LY76**A type : 22/28LW75**
Remote control and
Intelligent
1
sensors
Power Indicator
Speakers
Screen
Joystick Button
2
Stand Base
(Only 22LW75**)
Remote control and
Intelligent
1
sensors
Power Indicator
Speakers
Screen
Stand Base
(Only LY750*, LY76**)
Joystick Button
2
Remote control and
Intelligent
1
sensors
Power Indicator
Speakers
Screen
Joystick Button
2
C type : LY751*
ENG
ENGLISH
10
INSTALLATION PROCEDURE
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located below the TV screen.
NOTE
y
You can set the power indicator light to on or off by selecting OPTION in the main menus.
Using the Joystick button
You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Basic Functions
Power On
When the TV is turned off, place your finger on the joystick
button and press it once and release it.
Power Off
When the TV is turned on, place your finger on the joystick
button and press it once for a few seconds and release it.
Volume Control
If you place your finger over the joystick button and move it
left or right, you can adjust the volume level you want.
Programmes
Control
If you place your finger over the joystick button and move it
up or down, you can scrolls through the saved programmes
you want.
NOTE
y
When your finger over the joystick button and push it to the up, down, left or right, be careful not to
press the joystick button. If you press the joystick button first, you can not adjust the volume level
and saved programmes.
Adjusting the Menu
(Only LY76**)
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items(
) moving the joystick button up, down, left or right.
TV Off
Turns the power off.
Settings Accesses the main menu.
Close
Closes Clears on-screen displays and returns
to TV viewing.
Input List Changes the input source.
ENGENGLISH
11
INSTALLATION PROCEDURE
Lifting and Moving the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
CAUTION
y
Avoid touching the screen at all times, as
this may result in damage to the screen.
y
It is recommended to move the TV in
the box or packing material that the TV
originally came in.
y
Before moving or lifting the TV,
disconnect the power cord and all cables.
y
When holding the TV, the screen should
face away from you to avoid damage.
y
Hold the top and bottom of the TV
frame firmly. Make sure not to hold the
transparent part, speaker, or speaker grill
area.
y
When transporting a large TV, there
should be at least 2 people.
y
When transporting the TV by hand,
hold the TV as shown in the following
illustration.
y
When transporting the TV, do not expose
the TV to jolts or excessive vibration.
y
When transporting the TV, keep the TV
upright, never turn the TV on its side or
tilt towards the left or right.
y
Do not apply excessive pressure to cause
flexing /bending of frame chassis as it
may damage screen.
CAUTION
y
When handling the TV, be careful not to
damage the protruding joystick button.
(Image shown may differ from your TV.)
ENG
ENGLISH
12
INSTALLATION PROCEDURE
Setting up the TV
Image shown may differ from your TV.
Attaching the Stand
B stand base
1
2
A stand base
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
1
2
4EA
M4 x L14
M4 x L20
(Only 32LY750*,
32LY76**)
2
1
Stand Base
22LW75**
LY750*, LY76**
ENGENGLISH
13
INSTALLATION PROCEDURE
Stand Body
Stand Base
M4 x L20
4EA
1
2
M4 x L20
2EA
or
3
32/39LY751*
Torx Plus Star-Head Screws
2EA
ὤ㨴㥄
 
wyv{lj{pvuGjv}ly
Tighten the two Torx head screws
(supplied with TV) with a Torx Bit Driver
(not supplied with TV).
ENG
ENGLISH
14
INSTALLATION PROCEDURE
Stand Body
Stand Base
M4 x L20
4EA
1
2
3
M4 x L14
4EA
or
Tighten the two of these four screws and
the two Torx screws (supplied with TV)
to secure the TV. Tighten the two Torx
screws with a Torx Bit Driver (not supplied
with TV).
42/47/55LY751*
Torx Plus Star-Head Screws
2EA
M4 x L14
2EA
ENGENGLISH
15
INSTALLATION PROCEDURE
Mounting on a table
1 Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
y
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
y
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
y
Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not use too much force and over
tighten the screws; otherwise screw may
be damaged and not tighten correctly.
NOTE
y
Remove the stand before installing the
TV on a wall mount by performing the
stand attachment in reverse.
y
The Rubber will protect the opening
from accumulating dust and dirt. When
installing the wall mounting bracket, use
the Rubber. (Only LY751*)
Rubber
2EA
ENG
ENGLISH
16
INSTALLATION PROCEDURE
Using the Kensington security system
(This feature is not available for all models.)
y
Image shown may differ from your TV.
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
Adjusting the angle of the TV to suit view
(Only LY751*)
Swivel 20 degrees to the left or right and adjust
the angle of the TV to suit your view.
20˚20˚
CAUTION
y
When adjusting the angle of the product,
watch out for your fingers.
»
Personal injury may occur if hands
or fingers are pinched. If the product
is tilted too much, it may fall, causing
damage or injury.
Attaching the TV to a desk
(Depending on model)
The TV should be attached to a desk so it cannot
be pulled in a forward/backward direction,
potentially causing injury or damaging the
product.
A type )
Desk
Stand
4-Screws
(Not supplied with TV)
NOTE
y
Screw : M5 x L (*L: Table depth + 8~10
mm)
ex) Table depth: 15 mm, Screw: M5 x 25
ENGENGLISH
17
INSTALLATION PROCEDURE
Securing the TV to a Wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-
bolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the at surface.
CAUTION
y
Make sure that children do not climb on
or hang on the TV.
NOTE
y
Use a platform or cabinet that is strong
and large enough to support the TV
securely.
y
Brackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
B type )
2-Screws for Stand Fixing,
2-Washers for Stand Fixing,
2-Nuts for Stand Fixing
(Supplied with TV)
Desk
Stand
ENG
ENGLISH
18
INSTALLATION PROCEDURE
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
We recommend the use of LG’s wall mount
bracket.
When you do not use LG’s wall mount bracket,
please use a wall mount bracket where the device
is adequately secured to the wall with enough
space to allow connectivity to external devices.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Separate purchase (Wall Mounting Bracket)
Model
32/39LY76**
32/39LY75**
32LW75**
42/47/55LY76**
42/47/55LY75**
42LW75**
VESA (A x B) 200 x 200
400 x 400
Standard screw M6
M6
Number of screws 4
4
Wall mount
bracket
LSW240B
MSW240
LSW440B
MSW240
Model
22LW75**
28LW75**
VESA (A x B) 75 x 75
100 x 100
Standard screw M4 X L10
M4 X L10
Number of screws
4
4
Wall mount
bracket
LSW140B LSW140B
Wall mount bracket
LSW140B LSW240B LSW440B MSW240
A
B
ENGENGLISH
19
INSTALLATION PROCEDURE
CAUTION
y
Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
y
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
y
Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
y
Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the warranty.
y
Screw length from outer surface of back
cover should be under 8 mm. (Only
22/28LW75**)
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Wall mount Pad
Back Cover
Max.8 mm
NOTE
y
Use the screws that are listed on the
VESA standard screw specifications.
y
The wall mount kit includes an installation
manual and necessary parts.
y
The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
y
The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
y
For more information, refer to the manual
supplied with the wall mount.
y
When attaching a wall mounting bracket
to the TV, insert the wall mount spacers
into the TV wall mount holes to adjust the
vertical angle of the TV. (Only 42LW75**,
42LY75**, 42LY76**)
Wall Mount Spacer
ENG
ENGLISH
20
INSTALLATION PROCEDURE
Tidying cables
Image shown may differ from your TV.
(Only 22LW75**)
1 Gather and bind the cables with the cable
holder.
Cable Holder
(Only 28/32/42LW75**)
1 Gather and bind the cables with the cable
holder.
Cable Holder
(Only LY750*, LY76**)
1 Gather and bind the cables with the cable
holder.
2 Fix the Cable Management rmly to the TV.
Cable Holder
Cable Management
(Only 32LY751*)
1 Gather and bind the cables with the cable
holder.
Cable Holder
(Only 39/42/47/55LY751*)
1 Install the power cord holder and power cord.
It will help prevent the power cable from
being removed by accident.
2 Gather and bind the cables with the cable
holder.
Power Cord Holder/Screw
Cable Holder
CAUTION
y
Do not move the TV by holding the cable
holder, as the cable holder may break,
and injuries and damage to the TV may
occur.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47

LG 32LY750H Owner's manual

Category
LED TVs
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI