P/N 70017 Rev B
P/N 80002 - BLADE WEIGHT KIT
INSTALLATION & OPERATING INSTRUCTIONS
Intended Use:
The Blade Weight Kit is intended to be mounted on a walk-behind model 900 BedShaper™ for the
purpose of obtaining increased ground penetration of the cutting blade in extra hard or extra dry soil
conditions. The kit is not intended to be used at all times, but only when soil conditions require it. Even
with the weight kit installed, soil penetration depths will be less than when softer or moister conditions
exist. Caution must be used when the weight kit is installed as the cutting blade will not climb over
rocks or tree roots as easily as with the kit removed. Only enough weight should be added to get
acceptable soil penetration and not more.
Kit Contents:
2 - Weights - 21094 (8 lbs. each) 1 - Instruction Sheet - 70017
1 - Bushing - 22130 2 - Pin, detent - 18101
Installation Instructions:
1. If installing only one weight, do so as
shown in Figure 1, and secure with the
two detent pins provided. Make sure front
detent pin is fully inserted downward and
that it protrudes inside the blade frame to
keep the weights from moving left and
right.
2. If installing two or more weights, first
install the mounting bushing provided as
shown in Figure 1, then install weights
and secure with detent pins.
Operating Instructions:
1. Follow all safety precautions in the operator’s manual.
2. Safety glasses must be worn when operating machine.
3. Operate machine as outlined in the operator’s manual.
4. For best results, use only as many weights as is required to get the depth penetration desired.
The weight kit will significantly increase the damage to the cutting blade or the machine itself if
subjected to rocks or tree roots because the blade can not float up over those obstacles easily. Do
not use weights unless needed and remove weights as soon as conditions allow.
1028 Street Rd.
Southampton, PA 18966 Phone: (215) 357-5110 Fax: (215) 357-8045
Toll free: 877-LWONDER (877-596-6337)
www.littlewonder.com
©2013 Schiller Grounds Care, Inc.
Figure 1
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Land Pride AR25 Series User manual
-
Land Pride DH35 Series User manual
-
Bush Hog Posthole Digger Owner's manual
-
Land Pride STH2024 User manual
-
Land Pride DB26 User manual
-
Land Pride CSR10 User manual
-
-
-
Land Pride RCP27 & RCP37 Series User manual
-
Land Pride EA20 User manual
