CURT 13087 Installation guide

CURT
Brand
CURT
Model
13087
Type
Installation guide

CURT 13087 is a weight-carrying and weight-distribution hitch specifically designed for 1996-2002 Toyota 4Runner 2 & 4 DR vehicles. It offers a gross load capacity of 5,000 lbs. when used as a weight-carrying hitch with a 500 lbs. tongue weight. When used as a weight-distribution hitch, the gross load capacity increases to 6,000 lbs. with a 600 lbs. tongue weight. The hitch is designed to be easy to install, with no drilling required. It utilizes existing weld nuts and bolts on the vehicle's frame. The installation process typically takes around 35 minutes.

CURT 13087 is a weight-carrying and weight-distribution hitch specifically designed for 1996-2002 Toyota 4Runner 2 & 4 DR vehicles. It offers a gross load capacity of 5,000 lbs. when used as a weight-carrying hitch with a 500 lbs. tongue weight. When used as a weight-distribution hitch, the gross load capacity increases to 6,000 lbs. with a 600 lbs. tongue weight. The hitch is designed to be easy to install, with no drilling required. It utilizes existing weld nuts and bolts on the vehicle's frame. The installation process typically takes around 35 minutes.

Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
HEX BOLT1/2 - 13 x 1 1/241
CONICAL TOOTHED WASHER1/2"42
NUT PLATE WELDMENT
CM-NP4W13
NUT PLATE WELDMENT
CM-NP3W
14
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HITCH WEIGHT: LBS.
INSTALL TIME:
MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
5,000
500
33
35
6,000
600
13087 96-02 TOYOTA 4RUNNER 2 & 4 DR
1/14/2011
2
1
EXISTING WELDNUTS
EXISTING M12 BOLTS
FRAME RAIL
NO DRILLING REQUIRED
1) Remove tow hooks from vehicle frame.
2) Position weldnut plates inside frame as shown.
3) Raise hitch into position and align the side brackets with the existing tow hook holes at the end of the frame
rails. Reinstall the existing M12 bolts and tow hooks removed in step 1.
4) Insert 1/2" bolt and conical tooth washer through rearmost existing hole in hitch. This will thread into weldnut
plate as shown. Hand tighten only at this time.
5) Insert 1/2" bolt and conical tooth washer through foremost existing hole in hitch. This will thread into weldnut
plate as shown. Hand tighten only at this time.
6) Torque M12 fasteners to 68 lb.-ft. and 1/2" fasteners to 75 lb.-ft.
4
3
11/4/2006
  • Page 1 1

CURT 13087 Installation guide

CURT
Brand
CURT
Model
13087
Type
Installation guide

CURT 13087 is a weight-carrying and weight-distribution hitch specifically designed for 1996-2002 Toyota 4Runner 2 & 4 DR vehicles. It offers a gross load capacity of 5,000 lbs. when used as a weight-carrying hitch with a 500 lbs. tongue weight. When used as a weight-distribution hitch, the gross load capacity increases to 6,000 lbs. with a 600 lbs. tongue weight. The hitch is designed to be easy to install, with no drilling required. It utilizes existing weld nuts and bolts on the vehicle's frame. The installation process typically takes around 35 minutes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents