Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG35.11 Rev. 10/08
Catalog Specification Sheet No.
EG35.11
Drop-In Style Rectangular Food Warmers
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Options / Accessories
Mounting plates (for top-mount units)
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
Drop-In Style
Rectangular Food Warmers
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
MODELS:
TM1220FW-120T
TM1220FW-240T
TM1220FW-240T6
TM1220FW-277T6
BM1220FW-120T
BM1220FW-120TI
Short Form Specifications
Eagle Drop-In Style Rectangular Food Warmer, model
________________. Constructed of one-piece deep-drawn
type 304, 18-8 stainless steel. (Top mount, bottom mount, or
insulated bottom mount) unit available with (infinite control /
thermostat), pilot light, control panel (drain) with heating
element securely clamped to underside of unit.
Design and Construction Features
• Units available in top mount, bottom mount, and insulated
bottom mount.
• All units are constructed of one-piece deep-drawn 304
series 18-8 stainless steel with coved corners and feature
heating element securely clamped
to underside, allowing for service
through bottom.
• The insulated bottom mount hot food units feature exterior
wrapper of galvanized steel fully insulated with dense
fiberglass.
• Available with either infinite or thermostatic controls.
• Available with or without drains.
Certifications / Approvals
BM1220FW-240T
BM1220FW-240TI
BM1220FW-240T6
BM1220FW-240TI6
BM1220FW-277T6
BM1220FW-277TI6
TMP
top mount hot food unit
bottom mount hot food unit
insulated bottom mount hot food unit
bottom mount hot food unit
top mount hot food unit
insulated bottom mount hot
food unit
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Catalog Specification Sheet No.
EG35.11
Drop-In Style Rectangular Food Warmers
Item No.:
Project No.:
S.I.S. No.:
Rev. 10/08
Printed in U.S.A.
©2008 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
overall dimensions
model # in. mm
TMP
15
1
⁄
4
˝ x 23
1
⁄
4
˝ 387 x 591
Top Mounting Plates for Laminated Plastic or Wood Countertops
For use with top mount units.
TOP MOUNT BOTTOM MOUNT INSULATED BOTTOM MT width x depth weight
model # model # model # electrical data in. mm lbs. kg
TM1220FW-120 BM1220FW-120 BM1220FW-120I 120V, 1200W, 10.0A 13
7
⁄8˝ x 21
7
⁄8˝ 352 x 556 13 5.9
TM1220FW-240 BM1220FW-240 BM1220FW-240I 240V, 1200W, 5.0A 13
7
⁄8˝ x 21
7
⁄8˝ 352 x 556 13 5.9
Units with Infinite Controls*
Infinite control offers high and low selections along with eight other temperature settings.
TOP MOUNT BOTTOM MOUNT INSULATED BOTTOM MT width x depth weight
model # model # model # electrical data in. mm lbs. kg
TM1220FW-120T BM1220FW-120T BM1220FW-120TI 120V, 1200W, 10.0A 13
7
⁄8˝ x 21
7
⁄8˝ 352 x 556 13 5.9
TM1220FW-240T BM1220FW-240T BM1220FW-240TI 240V, 1200W, 5.0A 13
7
⁄8˝ x 21
7
⁄8˝ 352 x 556 13 5.9
TM1220FW-240T6 BM1220FW-240T6 BM1220FW-240TI6
208/
240V,
13
7
⁄8˝ x 21
7
⁄8˝ 352 x 556 13 5.9
1200/1600W, 5.8/6.6A
208/
240/277V,
TM1220FW-277T6 BM1220FW-277T6 BM1220FW-277TI6 900/1200/1600W, 13
7
⁄8˝ x 21
7
⁄8˝ 352 x 556 13 5.9
4.3/5.0/5.8A
Units with Thermostat Controls*
Thermostatic control—snap acting type—degree range of 86˚ to 550˚F for rapid heat recovery.
Cutouts
Note: Consult installation instructions prior to making cutouts.
* For optional drain, add suffix “-D” to model number. Example: TM1220FW-120-D
Cutout for Controls:
5
1
⁄8˝ x 2
3
⁄4˝ (130 x 70mm) - minimum 10
3
⁄4˝ (273mm) from top to centerline of cutout.
Cutout for Top Mount Series:
Requires 3˝ (76mm) side and rear clearances
and 4
1
⁄2˝ (114mm) front clearance.
Cutout for Bottom Mount Series:
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Eagle Group LCW-120-2-W Operating instructions
-
-
-
-
-
Eagle Group SHT2-240 Datasheet
-
Eagle Group 1220FW2-208 Datasheet
-
-
Eagle Group DCS2-HFU-B Datasheet
-
Eagle Group DCS6-HS Datasheet
Other documents
-
Eagle BM1220FW-120 Installation & Operating Instructions
-
-
Turnigy Accuel C150 User manual
-
moon 240i User manual
-
-
APW Wyott TM-12 Datasheet
-
-
Sierra InnovaMass 240i/241i User manual
