Product: Audio / video & S-video output booster
Part number: BOS-900
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
CAUTIONS
IMPORTANT
• Do not attempt to open the device, can cause a malfunction and void the warranty.
• Do not expose the equipment to extreme temperatures.
• Do not use or store this equipment in wet or damp locations. It may cause malfunction or electric
shock.
• Always use a soft, dry cloth to clean the equipment.
HIGHLIGHTS
The signal amplier distributes the signal of audio and/or video from a TV, PC or VCR one or up to
four devices (monitors, speakers, etc.) without any loss.
It includes inputs and outputs for composite video and S-video.
INSTRUCTIONS
SPECIFICATIONS
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
Before using your new Steren´s product, please read this instruction manual to prevent any
damage.
Product design and specications are subject to change without notice.
1. Place the amplier near the TV, PC or VCR. Do not place on top of any electronic device.
2. Connect the devices.
a) Audio connections
Stereo
- Connect the audio cables from the source to the corresponding inputs on the “INPUT” section.
- Connect the audio destination(s) input(s) to the corresponding “OUTPUT” section.
Mono
- Connect the audio source to the “L” input of the “INPUT” section.
- Connect the audio destination(s) input (s) to the “L” connector in the ‘OUPUT’ section. The audio is
sent to both outputs (left and right).
b) Video connections
Composite to composite video
- Connect the video source to the corresponding entry in the “INPUT” section.
- Connect the destination for the corresponding video input(s) on the “OUTPUT” section.
Composite video to s-video
- Connect the video source to the corresponding entry in the “INPUT” section.
- Connect the destination for the video input(s) corresponding(s) of the “OUTPUT” section, using a
S-video cable.
If the video source has both outputs (Composite Video and S-video), use only the second to have
better image quality. Do not use both inputs and/or outputs at the same time.
S-video to S-video
- Connect the video source to the corresponding entry in the “INPUT” section, using an S-video
cable.
- Connect the destination for the video input (s) corresponding of the “OUTPUT” section, using a
S-video cable.
S-video to composite video
- Connect the video source to the corresponding entry in the “INPUT” section, using an S-video
cable.
- Connect the destination for the video input (s) corresponding on the “OUTPUT” section.
3. Connect the power adapter to the amplier and to an electrical contact.
4. Turn on the devices connected to the amplier.
The amplier has no on/off switch because it consumes very little power. You can keep it
connected always, except when not using connected appliances for long periods.
CONNECTION EXAMPLES
01 800 500 9000
- Signal amplier
Input: 12 V - - - 250 mA
- Power converter
Input: 100 - 240 V ~ 60 Hz 200 mA
Output: 12 V - - - 250 mA
Dimensions:196 x 131 x 50 mm
Weight: 364 g (without converter)
Nominal consumption: 31, 2 Wh / día
Stand-by power consumption: not applicable
