Kohler T98757-4A-BN Dimensions Guide

Category
Faucets
Type
Dimensions Guide
Features
For use with valves with a diverter.
Complements Pinstripe
®
Suite.
Lever handle.
Requires a Rite-Temp
®
pressure-balancing valve.
Material
Premium material construction.
Installation
Wall-mount.
Required Accessories
K-11748 Series Rite-Temp® Valves
Adapters, Rough-in and Extension Kits
CSA B651
OBC
1061794
Codes/Standards
ASME A112.18.1/CSA B125.1
ASSE 1016
ADA
ICC/ANSI A117.1
CSA B651
OBC
KOHLER
®
Faucet Lifetime Limited
Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
Polished ChromeCP
Vibrant® Polished NickelSN
Vibrant® Brushed NickelBN
Vibrant® Brushed BronzeBV
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-28-2017 09:42
Pinstripe
®
Valve Trim Set
K-T98757-4A
3"
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
Avoid cross-flow conditions. Do not install shut-off
device on either valve outlet.
Cap the shower outlet if deck-mount spout,
diverter, or handshower is connected to the spout
outlet.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and wall-mount spout.
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-28-2017 09:42
Pinstripe
®
Valve Trim Set
K-T98757-4A
  • Page 1 1
  • Page 2 2

Kohler T98757-4A-BN Dimensions Guide

Category
Faucets
Type
Dimensions Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI