Glide-Lock GLSH-4 User manual

GLSH-4
Brand
Glide-Lock
Model
GLSH-4
Type
User manual

Glide-Lock GLSH-4 is a siding hanger installation system designed for vinyl siding. It prevents warping and buckling by allowing siding to expand and contract freely. It eliminates the margin of error, creating a perfect installation every time. It installs quieter and faster than traditional nails and provides more attachment points than traditional nails. It is warranted against siding blow-offs in up to category 5 hurricane winds and has a lifetime warranty against warping, buckling, and wind blow-off.

Glide-Lock GLSH-4 is a siding hanger installation system designed for vinyl siding. It prevents warping and buckling by allowing siding to expand and contract freely. It eliminates the margin of error, creating a perfect installation every time. It installs quieter and faster than traditional nails and provides more attachment points than traditional nails. It is warranted against siding blow-offs in up to category 5 hurricane winds and has a lifetime warranty against warping, buckling, and wind blow-off.

Glide-Lock Siding Hanger
Installation System
Lightweight, Easy to Use, Proven Performance
Use With Insulated and Non Insulated Siding
PREVENT VINYL SIDING FROM WARPING & BUCKLING!
GLIDE-LOCK CREATES OVER
6 X MORE ATTACHMENT
POINTS THAN STANDARD
NAILS
STANDARD NAILS
3/8” nail head equals 4” of contact
“Straightening Out The World One Home At A Time”
4” HANGERS EQUAL 24” OF CONTACT
Glide-Lock Siding Hanger
Installation System
Vinyl siding may be easier to install than other products, but it still requires installers to
follow stringent steps to guarantee a beautiful finished appearance (see page 2). One
panel of vinyl siding can routinely expand and contract a 1/2” or more during normal,
year-round changes in temperature. Even one nail driven too loose or too tight can
cause the siding to buckle or warp, creating an imperfect appearance. In fact, installers
are required to only allow approximately 1/32” clearance (the thickness of a dime)
between the fastener head and the vinyl*. An average siding job requires about 2,000
nails, creating many opportunities for error, even for the best installation experts.
NEW GLIDE-LOCK SIDING HANGERS PREVENT
VINYL FROM WARPING & BUCKLING
Glide-Lock Siding Hangers :
Allow siding to expand and contract freely, gliding like a train on a track
Eliminate the margin of error, creating a perfect installation every time
Prevent siding from warping or buckling due to imperfect installation
Warranted against siding blow offs in up to category 5 hurricane winds
Install quieter and faster than traditional nails
Provide more attachment points than traditional nails
Lifetime Warranty against warping, buckling and wind blow off
Made in the USA and ASTM tested
GLIDE-LOCK
FullBack®V Siding Insulaon for Vinyl
Siding has been designed to be a very durable exterior cladding product, and the
improvements in manufacturing process including color fading over the past 8-10 years have
served to improve these premium vinyl siding products even more. There is 1 obvious
problem with vinyl siding: the hollow void between the siding and the wall.
This leaves vinyl suscepble to impact damage from a variety of sources
like hail, ying debris, lawnmower stone throw or the occasional baseball. Adding Fullback®V
siding insulaon signicantly improves impact resistance over ordinary vinyl siding, because the
foam acts as a shock absorber to dampen the blow, limit the amount of ex and support the
return to shape. “Progressive Foam Technologies” have performed a series of vigorous tesng
both in-house, on homes in various neighborhoods and various geographical locaons.
“IMPACT RESISTANCE SIDING”
APPEARANCE
Vinyl siding is America’s #1 choice in exterior cladding for many
reasons. It is available in a variety of colors, trim and proles.
While vinyl siding has many opons to make your home beauful
and maintenance free, adding Fullback®V Insulaon behind your
vinyl siding provides addional value and opons that have never
been available before with ordinary vinyl siding.
NEW LEVEL OF ENERGY EFFICIENCY & NOISE REDUCTION
Adding Fullback®V Insulaon to your siding can make your siding the most
energy-ecient siding on the market. With an R-value range of 2.0-3.5, it can
reduce your heang and cooling costs year round; “Keep the heat in and cold
out during the winter months and the cool in and heat out during the summer
months” and we’ve been told the insulaon actually makes your home a lot
quieter keeping the outside noise outside… just to name a few -lawnmowers,
car trac, barking dogs & aircra.
Glide-Lock Siding Hanger
Installation System
Glide-Lock Mfg, Inc.
844-324-7559 www.GlideLock.com
Glide-Lock Siding Hanger Installaon System with Fullback®V, is the hidden treasure behind your vinyl siding
Designed to t over 98% of all vinyl siding on the market today
Designed For Use With Fullback®V,
Flat Insulaon or No Insulaon,
The Choice Is Yours!
Horizontal & Vercal Siding
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Glide-Lock GLSH-4 User manual

GLSH-4
Brand
Glide-Lock
Model
GLSH-4
Type
User manual

Glide-Lock GLSH-4 is a siding hanger installation system designed for vinyl siding. It prevents warping and buckling by allowing siding to expand and contract freely. It eliminates the margin of error, creating a perfect installation every time. It installs quieter and faster than traditional nails and provides more attachment points than traditional nails. It is warranted against siding blow-offs in up to category 5 hurricane winds and has a lifetime warranty against warping, buckling, and wind blow-off.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents