HZM10 / HZM10LFX Rigging Manual
v1.1 en.
M-SERIES
CONTENTS
General information
HZM10 / HZM10LFX Rigging Manual
Version 1.1 en, 11/2018
Retain this manual for future reference
Hill Pro Audio LTD reserve the right to alter any details or specifications of this product without notice.
Although every attempt has been made to make this manual as concise as possible, no responsibility is taken for errors or omissions.
Hill Pro Audio LTD
Unit 2, Fryor’s court, Murton, York, YO19 5UY
Tel : 03333 445 441 Email : info@hillproaudio.co.uk, www.hillproaudio.co.uk
1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.1. General safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.2.1.2. Warnings and symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3. Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.4. User responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.5. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2. Operation & Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.1. Operation & practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.2. Dispersion setup and rigging options . . . . . . . 5
3. Component parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1. Component parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3.2. M10FLY125 Light-duty frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3.3. M10FLY450 Medium-duty frame . . . . . . . . . . . . . . . . . . . . . .6
4. M10FLY125 (Light-duty) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.1. Flying mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.2. Pole mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.3. Ground mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. M10FLY450 (Medium-duty) . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.1. Flying mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.2. Ground mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
6. User Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.1. Warranty terms & conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.2. Warranty exclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.3. Warranty voidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
CONTENTS
3.1. Component Parts
3.2. M10FLY125 Light-duty frame
3 COMPONENT PARTS
6
M10FLYTH
One pole converter + Two 45x8mm pin and ring
M10FLYFL
One 40x8mm quick release pin with shackle converter
M10FLYTP
Two 30x10mm + one 40x8mm quick release pins
3.3. M10FLY450 Medium-duty frame
REF 1
Two Crosby 1 1/2t G-209 screw pin bow shackle
M10FLYTP
Two 30x10mm + one 40x8smm quick release pins
Contact your local distributor for replacements or
spares.
Hill Pro Audio LTD. Rigging Manual v1.1 en
5,0 - M10FLY450
4,0 - M10FLY125
4,1 - Flying mode
4,2 - Pole mode
4,3 - Ground mode
Hill Pro Audio LTD. Rigging Manual v1.1 en
4 M10FLY125
4. M10FLY125 - Light-duty frame
A versatile way to rig, the M10FLY125 allows a total of 6 HiZ
M10 cabinets to hang or ground stack. It is also possible to
mount the frame to a pole with the M10FLYTH converter for a
total of 4 cabinets.
Fig1 Above: M10FLYTH - In use in the rear hole set.
Fig4 Above: M10FLY125 - Stack on each other or on top of
cabinets.
Fig2 Above: M10FLY125 - Ground stack ready with rear foot
locked
Fig3 Above: M10FLYFL - In use under standard parameters.
7
4 M10FLY125
5,0 - M10FLY450
5,0 - M10FLY450
5,1 - Flying mode
5,2 - Ground mode
10
5 M10FLY450
5,1 - Flying mode
5,2 - Ground mode
5 M10FLY450
5. M10FLY450 - Medium-duty frame
The M10FLY450 is capable of hanging up to 24 HiZ M10
modules.
Fig17 Above: M10FLYTP - In use in the front hole set.
Fig18 Above: M10FLY125 - Stack on each other or on top of
cabinets.
Fig19 Above: M10FLY450 - Ground stack ready locked
Fig20 Above: M10FLYFL - In use under standard parameters.
Hill Pro Audio LTD. Rigging Manual v1.1 en
11
6 USER WARRANTY
6.1. Warranty terms & conditions
All products manufactured by Hill Pro Audio Ltd. are
warranted against defects in material and workmanship.
The term of the Hill Pro Audio Ltd. Warranty is 5 years from
date of the original sale, with the following exception: electro
mechanical components, including woofers and compression
drivers, which are warranted for 2 years.
If any defects are found in the materials or workmanship or
if the product fails to function properly during the applicable
warranty period, Hill Pro Audio Ltd, at its option, will repair or
replace the product.
The Hill Pro Audio Ltd. Warranty solely covers the replacement
of defective parts and/or the repair of parts as deemed
necessary by Hill Pro Audio Ltd. Hill Pro Audio Ltd. does not
accept responsibility for the loss of use while the equipment
is being repaired nor costs incurred for repairs. Return of
products under warranty claim must first be authorized by Hill
Pro Audio Ltd. and freight must be paid by the sender.
This warranty is not transferable to a second user.
6.2. Warranty Exclusions
1. Damage by improper use and improper or incorrect
installation. This includes damage to any parts due to over
amplification or connection to an incorrect supply voltage
2. Any damage caused by connection to or operation in
conjunction with a signal processing device or amplifier that
does not meet the specifications or a device that does not
have prior written approval from Hill Pro Audio Ltd.
3. Damage occurring during shipment.
4. Damage caused by neglect or abuse. This includes
accidental dropping, penetration of water, incorrect mounting
or exposure to excessive temperatures or humidity
5. Damage to any unit, which has been altered or on which
the serial number has been defaced, modified or removed
6. Damage from normal wear and tear sustained during
normal use
6.3. Warranty Voidance
1. The warranty shall be void by any act of attempted service,
alteration, or removal of parts by any third party not specifically
authorized by Hill Pro Audio Ltd.
2. The warranty shall be void if it is found that the instructions and
procedures for initial start-up and running of the product or equipment
have not been followed precisely or that the security procedures have
not been fully adhered to
3. The warranty shall be void if parts or accessories not supplied,
manufactured or authorized, in writing by the manufacturer, are found
to be incorporated in or connected to the product or equipment at any
time
4. The warranty shall be void if parts or accessories not supplied,
manufactured or authorized, in writing by the manufacturer, are found
to be incorporated in or connected to the product or equipment at any
time.
Final determination of warranty coverage lies solely with Hill Pro Audio
Ltd.
Please refer all warranty claims to your distributor.
14
Hill Pro Audio LTD. Rigging Manual v1.1 en
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Hill Pro Audio HZM10LFX Rigging Manual
- Type
- Rigging Manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
HP DVD Writer dvd500 series Quick start guide
-
Martin Audio WPS User Guides
-
Void Air Array User guide
-
-
-
Electro-Voice Xi Series Xi-1191AF Owner's manual
-
-
Turbosound TBV123 Owner's manual
-
JBL Professional Portable Speaker DPC-2 User manual
-
